CISCO-WAN-BBIF-PORT-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
3
Rows
3
Columns
29
bbIfCnfPortGrpTable
table.1.3.6.1.4.1.351.110.5.2.6.1.1.1
·
1 row entry
·
10 columns
The Broadband Interface config table is for logical interface. There will an entry for each of the logical partition of the physical line.
An entry for the logical interface. The interface may be further
be configured to be used as a virtual trunk OR as a UNI Port.
be configured to be used as a virtual trunk OR as a UNI Port.
Indexes
bbIfNum
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
bbIfNum
This is logical interface number within a physical line num.
In MGX PXM1 card, a physical port can have a maximum of 32 logical interfaces. |
Integer32 Constraints: range: 1-32 |
.1.3.6.1.4.1.351.110.5.2.6.1.1.1.1.1 |
||||||
|
bbIfRowStatus
This variable enables or disables the logical interface.
1 - enable 2 - disable 3 - modify |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.351.110.5.2.6.1.1.1.1.2 |
||||||
|
bbIfAdmin
This variable enables or disables the logical interface.
1 - up 2 - down 3 - writeOnly |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.351.110.5.2.6.1.1.1.1.3 |
||||||
|
bbIfLineNum
The line number associated with the logical interface.
For PXM1, there is currently 4 physical lines. |
Integer32r/w Constraints: range: 1-4 |
.1.3.6.1.4.1.351.110.5.2.6.1.1.1.1.4 |
||||||
|
bbIfIngrPctBandwidth
The percentage of aggregate physical line bandwidth, available for
this broadband interface - Ingress. Default is 0 %. |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.351.110.5.2.6.1.1.1.1.5 |
||||||
|
bbIfEgrPctBandwidth
The percentage of aggregate physical line bandwidth, available for
this broadband interface - Egress . Default is 0 %. |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.351.110.5.2.6.1.1.1.1.6 |
||||||
|
bbIfMinVpi
The lower limit of VPI range to be reserved for
this logical interface. |
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.351.110.5.2.6.1.1.1.1.7 |
||||||
|
bbIfMaxVpi
The upper limit of VPI range to be reserved
for this logical interface. For virtual trunks, bbIfMinVpi and bbIfMaxVpi should be the same. |
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.351.110.5.2.6.1.1.1.1.8 |
||||||
|
bbIfSpeed
The speed of the port in cells per second.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.351.110.5.2.6.1.1.1.1.9 |
||||||
|
bbIfMaxCellRatePct
The maximum cell rate allowed for the port in terms of
percentage. Must be greater than or equal to bbIfIngrPctBandwidth. The default is 100 percent. |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.351.110.5.2.6.1.1.1.1.10 |
bbIfStateGrpTable
table.1.3.6.1.4.1.351.110.5.2.6.3.1
·
1 row entry
·
5 columns
The state table for the logical interface.
An entry for each logical interface representing
the state.
the state.
Indexes
bbStateIfNum
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
bbStateIfNum
This is logical interface number within a physical line num.
In MGX PXM1 card, a physical port can have a maximum of 32 logical interfaces. |
Integer32 Constraints: range: 1-32 |
.1.3.6.1.4.1.351.110.5.2.6.3.1.1.1 |
||||||||||||
|
bbIfState
This variable indicates the status of the logical interface.
The following values are not supported for the logical interface. remoteloopback (3), outofcelldelineation (6), localloopb… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.351.110.5.2.6.3.1.1.2 |
||||||||||||
|
bbIfOversubscribed
This variable indicates the whether the logical interface is
over subscribed or not. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.351.110.5.2.6.3.1.1.3 |
||||||||||||
|
bbIfIngrPercentUtil
Percentage Utilization of the interface in the
Ingress direction. |
Integer32 Constraints: range: 0-1000 |
.1.3.6.1.4.1.351.110.5.2.6.3.1.1.4 |
||||||||||||
|
bbIfEgrPercentUtil
Percentage Utilization of the interface in
the Egress direction. |
Integer32 Constraints: range: 0-1000 |
.1.3.6.1.4.1.351.110.5.2.6.3.1.1.5 |
bbIfCntGrpTable
table.1.3.6.1.4.1.351.110.5.2.6.4.1.1
·
1 row entry
·
14 columns
The Broadband Interface Count table is for logical interface. There will an entry for each of the logical partition of the physical line.
An entry for logical interface.
Indexes
bbCntIfNum
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
bbCntIfNum
Refers to the logical interface index.
|
Integer32 Constraints: range: 1-32 |
.1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.1 |
||||
|
bbIfTotalCells
Total number of cells (VC plus Qbin) that belong
to this Interface. This maps on to the virtual interface of QE. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.2 |
||||
|
bbIfRcvValidOAMCells
Total number of OAM cell received.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.3 |
||||
|
bbIfRcvRmCells
Total number of RM cells Received.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.4 |
||||
|
bbIfRcvClp0Cells
Total number of CLP-0 cells Received.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.5 |
||||
|
bbIfRcvClp1Cells
Total number of CLP-1 cells Received.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.6 |
||||
|
bbIfRcvClp0DiscCells
Total number of CLP-0 cells discarded at Ingress.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.7 |
||||
|
bbIfRcvClp1DiscCells
Total number of CLP-1 cells discarded at Ingress.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.8 |
||||
|
bbIfXmtOAMCells
Total number of OAM cells transmitted.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.9 |
||||
|
bbIfXmtRmCells
Total number of RM cells transmitted.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.10 |
||||
|
bbIfXmtClp0Cells
Total number of CLP-0 cells transmitted.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.11 |
||||
|
bbIfXmtClp1Cells
Total number of CLP-1 cells transmitted.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.12 |
||||
|
bbIfCntClrButton
Writing a value of 2 resets all the counters.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.13 |
||||
|
bbIfRcvErroredCells
Total number of cells with Invalid VPI VCI or
Invalid PTI fields This is a card level counter and hence will be the same for all instances of the ports. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.351.110.5.2.6.4.1.1.1.14 |