CISCO-VMPS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
28

vmpsConfigTable

table
.1.3.6.1.4.1.9.9.53.1.1.1 · 1 row entry · 11 columns
Open in standard view 
A table for creating and controling an instance of
the VMPS.
vmpsConfigEntry entry .1.3.6.1.4.1.9.9.53.1.1.1.1
An entry (conceptual row) in the vmpsConfigTable.
Indexes
vmpsIndex
Column Syntax OID
vmpsIndex
An arbitrary index identifying this particular
instance of the VMPS. This index need not be
consistent across reboots. For devices only
supporting one instance of the VMPS this object need
only accept the value of 1. …
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.9.9.53.1.1.1.1.1
vmpsAdminStatus
The desired state of the VMPS as prescribed by the
operator. The actions of the agent will, if at all
possible, eventually result in the desired state being
reflected in the lecsOperStatus.
Enumerationr/w
Enumerated Values:
1active
2inactive
 .1.3.6.1.4.1.9.9.53.1.1.1.1.2
vmpsDownloadServerAddress
The IP address of the host supplying the TFTP configuration
data for the VMPS. If this value of this object is 0.0.0.0
then the VMPS will not attempt to download configuration
information.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.9.9.53.1.1.1.1.3
vmpsConfigFileName
The filename of the configuration file the VMPS will
attempt to download.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.53.1.1.1.1.4
vmpsTriggerDownload
When set to `loadDatabase' this object will cause the VMPS
to initiate a TFTP download of the configuration tables
stored at the host identified by the
vmpsDownloadServerAddress. Setting to 'loadRcpDataBase'
will caus…
Enumerationr/w
Enumerated Values:
1noOperation
2loadDatabase
3loadRcpDataBase
 .1.3.6.1.4.1.9.9.53.1.1.1.1.5
vmpsFallbackVlan
This is the VLAN returned in the configuration response
when a given configuration request contains data that
matches nothing in the VMPS database (given the specified
classifiers). A value of the empty string signifie…
VlanNamer/w
Textual Convention: VlanName OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.9.9.53.1.1.1.1.6
vmpsSecureMode
If in secure mode the VMPS will instruct the requesting
device to shutdown a port as a result of a match
failure.
Enumerationr/w
Enumerated Values:
1secure
2open
 .1.3.6.1.4.1.9.9.53.1.1.1.1.7
vmpsManagementDomain
The management domain this VMPS is servicing.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.9.9.53.1.1.1.1.8
vmpsRowStatus
The status of the conceptual row. A valid value of
vmpsManagementDomain must be set before the row can
become active. Devices that only support one instance
of the VMPS may opt to always have a row in this table
insta…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.9.53.1.1.1.1.9
vmpsRcpRemoteUserName deprecated
Remote username for download of the VMPS database
file via RCP protocol. This object must be set when
vmpsTriggerDownload is set to loadRcpDataBase(3).
This object will be have no effect for protocols
other than RCP.
OctetStringr/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.9.9.53.1.1.1.1.10
vmpsRcpRemoteUserName2
This object deprecates the object vmpsRcpRemoteUserName to
support full range, i.e. SIZE(0..255), of
TEXTUAL-CONVENTION SnmpAdminString.

The object indicates remote username for download of the
VMPS datab…
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.53.1.1.1.1.11

vmpsStatsTable

table
.1.3.6.1.4.1.9.9.53.1.1.2 · 1 row entry · 6 columns
Open in standard view 
Statistics relating to this instance of the VMPS.
vmpsStatsEntry entry .1.3.6.1.4.1.9.9.53.1.1.2.1
An entry (conceptual row) in the vmpsStatsTable.
Indexes
No indexes recorded
Column Syntax OID
vmpsLastRestart
The value of sysUpTime when the VMPS was last
restarted.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.9.9.53.1.1.2.1.1
vmpsInConfigReqs
The total number of configure requests, including
vmpsInConfigErrors, that have been received by the VMPS.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.53.1.1.2.1.2
vmpsInConfigErrors
Then number of packets received by the VMPS but which
were not correctly formatted configure requests.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.53.1.1.2.1.3
vmpsOutConfigFails
The number of configure responses sent by this
particular VMPS whose status was other than success.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.53.1.1.2.1.4
vmpsLastFailClient
The MAC address of the VLAN client whose last
configuration request was rejected. This MAC address
will be for the VLAN client who was delivered the last
configure response that caused the vmpsOutConfigFails
object to …
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.9.9.53.1.1.2.1.5
vmpsOperStatus
This object reflects the actual state of the VMPS
which may differ from that of the vmpsAdminStatus
object. This can occur when the configuration database
fails to load but the corresponding vmpsAdminStatus is
`active'…
Enumeration
Enumerated Values:
1active
2inactive
3loading
 .1.3.6.1.4.1.9.9.53.1.1.2.1.6

vmpsMacConfigTable

table
.1.3.6.1.4.1.9.9.53.1.2.1 · 1 row entry · 7 columns
Open in standard view 
A (conceptual) table utilized by a VMPS to map a MAC
address of a end station to a VLAN.
vmpsMacConfigEntry entry .1.3.6.1.4.1.9.9.53.1.2.1.1
An entry (conceptual row) of a mapping between a MAC
address in utilization by an end station and a VLAN.
Indexes
vmpsIndex vmpsMacConfigAddress
Column Syntax OID
vmpsMacConfigAddress
The MAC address of an end station to be associated
with an VLAN.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.9.9.53.1.2.1.1.1
vmpsMacConfigVlan
A VLAN that will be returned to an end
station that provides the corresponding MAC address in
a configuration request. A zero length string
indicates that the corresponding MAC address is not
permitted on any VLANs, inc…
VlanNamer/w
Textual Convention: VlanName OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.9.9.53.1.2.1.1.2
vmpsMacConfigLastAccessed
The value of sysUpTime when this entry was last used
to map a MAC address to a VLAN name. Managers may
opt to use this object to garbage collect entries that
have not been used for a prolonged period of time.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.9.9.53.1.2.1.1.3
vmpsMacConfigLastRequestor
The IP address of the device that requested the VLAN
associated with the MAC of this row. The manager may use
this object in an attempt to locate where a dynamic host
currently resides.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.9.9.53.1.2.1.1.4
vmpsMacConfigLastRequestPortId
The ID of the port included in the configuration request
that corresponded to the designated entry in this table.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.53.1.2.1.1.5
vmpsMacConfigLastResponseStatus
The value of the status field in the response for the last
configure request for this MAC-address.
Enumeration
Enumerated Values:
1success
2versionNotSupported
3insufficientResources
4accessDenied
5portShutdown
6unknownManagementDomain
 .1.3.6.1.4.1.9.9.53.1.2.1.1.6
vmpsMacConfigStatus
The row cannot be set to `active' until an
appropriate value exists for vmpsMacConfigVlan.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.9.53.1.2.1.1.7

vmpsVlanConfigTable

table
.1.3.6.1.4.1.9.9.53.1.2.2 · 1 row entry · 4 columns
Open in standard view 
A list of VLANs with restricted access from dynamic
ports. This list takes the form of a group of VLANs  
and a group of ports permitted for those VLANs. If no
entry exists for a particular VLAN then there are no
restrictions as to what ports are allowed to access
that VLAN. If entries exist for a VLAN, then all ports
not explicitly permitted for that VLAN are denied
access (in the form of a failed configuration
response).
vmpsVlanConfigEntry entry .1.3.6.1.4.1.9.9.53.1.2.2.1
An entry (conceptual row) in the vmpsVlanConfigTable.
Indexes
vmpsIndex vmpsVlanName vmpsDeviceId vmpsPortName
Column Syntax OID
vmpsVlanName
The VLAN name associated with a group of ports which
are allowed access to that VLAN dynamically.
VlanName
Textual Convention: VlanName OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.9.9.53.1.2.2.1.1
vmpsDeviceId
The IP address of the device containing the
permitted ports.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.9.9.53.1.2.2.1.2
vmpsPortName
The ifName of the port on which dynamic access to
the specified VLAN is allowed.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.53.1.2.2.1.3
vmpsVlanConfigStatus
The status object associated with the conceptual row.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.9.53.1.2.2.1.4