CISCO-VISM-PORT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
1
Rows
1
Columns
7
.1.3.6.1.4.1.351.110.5.5.2.1.1 · 1 row entry · 7 columns
Port configuration table for the virtual port.
Only one entry is allowed in this table.
vismPortCnfGrpEntry entry .1.3.6.1.4.1.351.110.5.5.2.1.1.1
An entry for logical port.
Indexes
vismPortNum
Column Syntax OID
vismPortNum
This is a logical port number. If PXM1
(Processor Switch Module) is the PXM
used on the shelf this object should be set to 1.
For PXM1E this object should be set to 255.
Integer32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.351.110.5.5.2.1.1.1.1
vismPortRowStatus
The object add, delete or modify a port.

'add' - add a port, a port acn only be added if the
status is in 'del'.
'del' - delete a port, once a port is deleted
the status is chane to 'del'.…
Enumerationr/w
Enumerated Values:
1add
2del
3mod
.1.3.6.1.4.1.351.110.5.5.2.1.1.1.2
vismPortLineNum
This represents the line number to which this port is associated.
Since the network port is not associated with any line,
line number 0 is returned on a GET.
Integer32r/w
Constraints:
range: 0-8
.1.3.6.1.4.1.351.110.5.5.2.1.1.1.3
vismPortType
The value of this object is always set to 'voIP'.
It indicates that network port. The same value
is used even when VISM supports VoAAL1 or VoAAL2.
Enumerationr/w
Enumerated Values:
1voIP
2userPort
.1.3.6.1.4.1.351.110.5.5.2.1.1.1.4
vismPortDs0ConfigBitMap
This respesents the bit map of DS0s which is used to create
this port. Bit 0 represents DS0-1.
Since this object is not applicable to the network port,
value 0 is returned on a GET.
Integer32r/w
Constraints:
range: 0-16777215
.1.3.6.1.4.1.351.110.5.5.2.1.1.1.5
vismPortSpeed
The speed of the port in cells per second.
It is used by VISM card to advertise virtual port bandwidth to
the controller, SVC(Switched Virtual Circuit) and
PVC(Permanent Virtual Circuit) connection admission
control an…
Integer32r/w
Constraints:
range: 1-5651320
.1.3.6.1.4.1.351.110.5.5.2.1.1.1.6
vismPortState
This object indicates the state of the port.
Enumeration
Enumerated Values:
1notConfigured
2active
.1.3.6.1.4.1.351.110.5.5.2.1.1.1.7