CISCO-SYS-INFO-LOG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
15

csilServerTable

table
.1.3.6.1.4.1.9.9.330.1.2.3 · 1 row entry · 10 columns
Open in standard view 
A table of servers used to keep the data files for System
Information Logging purpose.
csilServerEntry entry .1.3.6.1.4.1.9.9.330.1.2.3.1
Information about a server to keep the data file for System
Information Logging purpose. Entries in this table can be
created or deleted using csilServerRowStatus object.
Indexes
csilServerIndex
Column Syntax OID
csilServerIndex
An arbitrary index assigned by the NMS to identify the
entry. Maximum value of this object is limited by the
value of csilMaxServerAllowed.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.330.1.2.3.1.1
csilServerAddressType
Specifies the type of address used to determine the address
of the server to be used for logging system information.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.330.1.2.3.1.2
csilServerAddress
Specifies the address of the remote host used for logging
system information.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.330.1.2.3.1.3
csilServerProfileIndex
Specifies the profile assigned to this server. A profile is a
set of specific commands defined in csilCommandConfigTable,
which will be executed in the period specified by the object
csilServerInterval for logging sy…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.330.1.2.3.1.4
csilServerProtocol
Specifies the file transfer protocol to be used for logging
system information.

- tftp(1): indicates that tftp is used for logging system
information.

- rcp(2): indicates that …
Enumerationr/w
Enumerated Values:
1tftp
2rcp
3ftp
 .1.3.6.1.4.1.9.9.330.1.2.3.1.5
csilServerRcpUserName
Specifies the remote user name used to download system
information via RCP protocol. This object must be set when
csilServerProtocol is set to rcp(2). This object will have
no effect for protocols other than RCP.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.330.1.2.3.1.6
csilServerInterval
A period of time, measured in unit of minutes. This object
specifies how often the command set is executed for
logging system information.
minutesSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.330.1.2.3.1.7
csilServerLoggingFileName
Specifies the file name used for logging system
information.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.330.1.2.3.1.8
csilServerLastStatus
Indicates the status of the last system information
logging process into the server.

- none(1): initial state. No process has been started.
- noLogFile(2): there is no log file has been configured.
…
Enumeration
Enumerated Values:
1none
2noLogFile
3noCommand
4linkBlock
5authError
6addrError
7copying
8writeError
9success
10ftpError
 .1.3.6.1.4.1.9.9.330.1.2.3.1.9
csilServerRowStatus
This object is used to manage the creation, modification
and deletion of rows in the table.

Except of csilServerRcpUserName, all other objects need to
be set before csilServerRowStatus can be set to 'act…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.9.330.1.2.3.1.10

csilCommandsTable

table
.1.3.6.1.4.1.9.9.330.1.3.2 · 1 row entry · 5 columns
Open in standard view 
A table of commands for System Information Logging 
purpose.
csilCommandsEntry entry .1.3.6.1.4.1.9.9.330.1.3.2.1
An entry contains the command logging information regarding
a profile and a command index combination. Entries in this
table can be created or deleted using csilCommandStatus
object.
Indexes
csilCommandProfileIndex csilCommandIndex
Column Syntax OID
csilCommandProfileIndex
An arbitrary index assigned by NMS to uniquely identify a
profile. A profile contains a set of commands that will be
executed periodically for the purpose of logging system
information.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.330.1.3.2.1.1
csilCommandIndex
An arbitrary index assigned by NMS, which is combined with
the value of csilCommandProfileIndex object to uniquely
identify an entry.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.330.1.3.2.1.2
csilCommandString
Specifies the command to be executed.
OctetStringr/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.9.9.330.1.3.2.1.3
csilCommandExecOrder
Specifies the order in which the command specified in the
object csilCommandLog will be executed periodically for
loging system information. Value of this object need not to
be consistent as it can be changed during th…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.330.1.3.2.1.4
csilCommandStatus
This object is used to manage the creation, modification and
deletion of rows in this table.

Value of this object can be set to 'active' only when value of
other columns have been assigned. The entry ma…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.9.330.1.3.2.1.5