CISCO-SERVICE-CONTROL-LINK-MIB Table View

cscLinkStatusTable

table

.1.3.6.1.4.1.9.9.631.1.2 · 1 row entry · 7 columns

This table provides information regarding the configuration and
status of the links that pass through the service control
entity
and carry inband traffic. The link is an entity and has an entry
in the entPhysicalTable of the ENTITY-MIB with entPhysicalClass
of 'other' and is contained in entity 'chassis' or 'module'. A
link entity contains entities from the entPhysicalTable of
entPhysicalClass 'port'.
          
The number of entries in this table is determined by the number
of service control entities in the entPhysicalTable and the
number of links supported by each. 
          
Each Link entity contains at least a subscriber side port entity
and a network side port entity.

cscLinkStatusEntry entry .1.3.6.1.4.1.9.9.631.1.2.1

An entry (conceptual row) in the cscLinkStatusTable created by
the agent for every link entity contained in the service control
entity after initilization.

entPhysicalIndex is index for this table which rep…

Indexes

ENTITY-MIBentPhysicalIndex

Column Syntax OID

cscLinkAdminModeOnActive

This object indicates the desired mode of the link when the
entity that contains this link has the operating status of
active and the entity is not in boot or failure state.

CsceLinkModeTyper/w

Textual Convention: CsceLinkModeType Enumeration

Type Values:

1	other
2	bypass
3	forwarding
4	cutoff
5	sniffing

.1.3.6.1.4.1.9.9.631.1.2.1.1

cscLinkAdminModeOnFailure

This object indicates the desired mode of the link when the
entity that contains this link has the operational status of
failure.

CsceLinkModeTyper/w

Textual Convention: CsceLinkModeType Enumeration

Type Values:

1	other
2	bypass
3	forwarding
4	cutoff
5	sniffing

.1.3.6.1.4.1.9.9.631.1.2.1.2

cscLinkOperMode

This object reflects the operational mode of the link.

CsceLinkModeType

Textual Convention: CsceLinkModeType Enumeration

Type Values:

1	other
2	bypass
3	forwarding
4	cutoff
5	sniffing

.1.3.6.1.4.1.9.9.631.1.2.1.3

cscLinkAdminReflectionEnable

This object indicates how the failure status of the physical
link on one port should be reflected to the other port(s) of the
link.
'reflectionEnabled' : Failure is reflected on the other
…

Enumerationr/w

Enumerated Values:

1	reflectionEnabled
2	reflectionOnAllPortsEnabled
3	reflectionDisabled

.1.3.6.1.4.1.9.9.631.1.2.1.4

cscLinkSubscriberSidePortIndex

This object specifies the entPhysicalIndex value that uniquely
identifies the port entity contained in this link entity in the
entPhysicalTable. This port entity is connected to the
subscriber side.

CISCO-TCEntPhysicalIndexOrZero

Textual Convention: CISCO-TCEntPhysicalIndexOrZero Integer32

Type Constraints:
range: 0..2147483647

.1.3.6.1.4.1.9.9.631.1.2.1.5

cscLinkNetworkSidePortIndex

This object specifies the entPhysicalIndex value that uniquely
identifies the port entity contained in this link entity in the
entPhysicalTable. This port entity is connected to the
network side.

CISCO-TCEntPhysicalIndexOrZero

Textual Convention: CISCO-TCEntPhysicalIndexOrZero Integer32

Type Constraints:
range: 0..2147483647

.1.3.6.1.4.1.9.9.631.1.2.1.6

cscLinkAdminReflectionState

This object indicates how the link propagates the failure state
between the ports on each end of the link.
'noLinkReflection' : No failure is currently being
reflected.
'ref…

Enumerationr/w

Enumerated Values:

1	noLinkReflection
2	reflectingFailureToNetwork
3	reflectingFailureToSubscriber
4	reflectingFailureToBoth

.1.3.6.1.4.1.9.9.631.1.2.1.7