CISCO-RTTMON-IP-EXT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

crttMonIPEchoAdminTable

table

.1.3.6.1.4.1.9.9.572.1.1 · 1 row entry · 10 columns

Open in standard view

An extension of the rttMonEchoAdminTable, defined in
the CISCO-RTTMON-MIB, which provides the additional
capability of recording the addresses as IPv6 addresses,
plus other IPv6 and IP layer extension information

crttMonIPEchoAdminEntry entry .1.3.6.1.4.1.9.9.572.1.1.1

A list of additional objects needed for IPv6 addresses.

Indexes

No indexes recorded

Column Syntax OID

crttMonIPEchoAdminTargetAddrType

An enumerated value which specifies the address type
of the target.
This object must be used along with the
crttMonIPEchoAdminTargetAddress
object as it identifies the address family of the
address specified by that ob…

INET-ADDRESS-MIBInetAddressTyper/w

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.9.9.572.1.1.1.1

crttMonIPEchoAdminTargetAddress

A string which specifies the address of the target.
This object, in conjunction with the
crttMonIPEchoAdminTargetAddrType object,
may be used to specify either an IPv6 or an IPv4 address and
is an alternative to the r…

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.572.1.1.1.2

crttMonIPEchoAdminSourceAddrType

An enumerated value which specifies the address type
of the source.
This object must be used along with the
crttMonIPEchoAdminSourceAddress
object as it identifies the address family of the
address specified by that obj…

INET-ADDRESS-MIBInetAddressTyper/w

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.9.9.572.1.1.1.3

crttMonIPEchoAdminSourceAddress

A string which specifies the address of the target.
This object, together with the
crttMonIPEchoAdminSourceAddrType object,
may be used to specify either an IPv6 or an IPv4 address and
is an alternative to the rttMonE…

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.572.1.1.1.4

crttMonIPEchoAdminNameServerAddrType

An enumerated value which specifies the address type
of the target.
This object must be used along with the
crttMonIPEchoAdminNameServerAddress
object as it identifies the address family of the
address specified by that…

INET-ADDRESS-MIBInetAddressTyper/w

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.9.9.572.1.1.1.5

crttMonIPEchoAdminNameServerAddress

A string which specifies the address of the target. This object,
together with the crttMonIPEchoAdminNameServerAddrType object,
may be used to specify either an IPv6 or an IPv4 address and is
an alternative to the rttMo…

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.572.1.1.1.6

crttMonIPEchoAdminLSPSelAddrType

An enumerated value which specifies the address type
of the target.
This object must be used along with the
crttMonIPEchoAdminLSPSelAddress
object as it identifies the address family of the
address specified by that obj…

INET-ADDRESS-MIBInetAddressTyper/w

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.9.9.572.1.1.1.7

crttMonIPEchoAdminLSPSelAddress

A string which specifies the address of the LSP Selector.
This object, in conjunction with the
crttMonIPEchoAdminLSPSelAddrType object,
may be used to specify either an IPv6 or an IPv4 address and is
an alternative to …

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.572.1.1.1.8

crttMonIPEchoAdminDscp

The DSCP value (either an IPv4 TOS octet or an IPv6 Traffic
Class octet) to be set in outgoing packets.

DIFFSERV-DSCP-TCDscpOrAnyr/w

Textual Convention: DIFFSERV-DSCP-TCDscpOrAny Integer32

Type Constraints:
range: -1..63

.1.3.6.1.4.1.9.9.572.1.1.1.9

crttMonIPEchoAdminFlowLabel

The Flow Label in an IPv6 packet header.

IPV6-FLOW-LABEL-MIBIPv6FlowLabelOrAnyr/w

Textual Convention: IPV6-FLOW-LABEL-MIBIPv6FlowLabelOrAny Integer32

Type Constraints:
range: -1..1048575

.1.3.6.1.4.1.9.9.572.1.1.1.10

crttMonIPLatestRttOperTable

table

.1.3.6.1.4.1.9.9.572.1.2 · 1 row entry · 2 columns

Open in standard view

An extension of the rttMonLatestRttOperTable, defined in
the CISCO-RTTMON-MIB, which provides the additional
capability of specifying IPv6 addresses.

crttMonIPLatestRttOperEntry entry .1.3.6.1.4.1.9.9.572.1.2.1

A list of objects required to support IPv6 addresses.

Indexes

CISCO-RTTMON-MIBrttMonCtrlAdminIndex

Column Syntax OID

crttMonIPLatestRttOperAddressType

An enumerated value which specifies the address type
of the target.
This object must be used along with the
crttMonIPLatestRttOperAddress
object as it identifies the address family of the
address specified by that objec…

INET-ADDRESS-MIBInetAddressTyper/w

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.9.9.572.1.2.1.1

crttMonIPLatestRttOperAddress

A string which specifies the address of the target. This object,
together with the crttMonIPLatestRttOperAddressType object,
may be used to specify either an IPv6 or an IPv4 address and is
an alternative to the rttMonLa…

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.572.1.2.1.2

crttMonIPEchoPathAdminTable

table

.1.3.6.1.4.1.9.9.572.1.3 · 1 row entry · 2 columns

Open in standard view

An extension of the rttMonEchoPathAdminTable, defined in
the CISCO-RTTMON-MIB, which provides the additional
capability of recording the hops as IPv6 addresses.

crttMonIPEchoPathAdminEntry entry .1.3.6.1.4.1.9.9.572.1.3.1

A list of additional objects needed for IPv6 addresses.

Indexes

No indexes recorded

Column Syntax OID

crttMonIPEchoPathAdminHopAddrType

An enumerated value which specifies the address type
of the hop.
This object must be used along with the
crttMonIPEchoPathAdminHopAddress
object as it identifies the address family of the
address specified by that objec…

INET-ADDRESS-MIBInetAddressTyper/w

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.9.9.572.1.3.1.1

crttMonIPEchoPathAdminHopAddress

A string which specifies the address of the hop. This object,
together with the crttMonIPEchoPathAdminHopAddrType object,
may be used to specify either an IPv6 or an IPv4 address and is
an alternative to the
rttMonEc…

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.572.1.3.1.2

crttMonIPStatsCollectTable

table

.1.3.6.1.4.1.9.9.572.1.4 · 1 row entry · 2 columns

Open in standard view

An extension of the rttMonStatsCollectTable, defined in
the CISCO-RTTMON-MIB, which provides the additional
capability of specifying the collection address as an
IPv6 address.

crttMonIPStatsCollectEntry entry .1.3.6.1.4.1.9.9.572.1.4.1

A list of additional objects needed for IPv6 addresses.

Indexes

No indexes recorded

Column Syntax OID

crttMonIPStatsCollectAddressType

An enumerated value which specifies the address type
of the target.
This object must be used along with the
crttMonIPStatsCollectAddress
object as it identifies the address family of the
address specified by that object…

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.9.9.572.1.4.1.1

crttMonIPStatsCollectAddress

A string which specifies the address of the collection target.
This object, in conjunction with the
crttMonIPStatsCollectAddressType object,
may be used to specify either an IPv6 or an IPv4 address and is
an alternativ…

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.572.1.4.1.2

crttMonIPLpdGrpStatsTable

table

.1.3.6.1.4.1.9.9.572.1.5 · 1 row entry · 2 columns

Open in standard view

An extension of the rttMonLpdGrpStatsTable, defined in
the CISCO-RTTMON-MIB, which provides the additional
capability of specifying the target PE address as an
IPv6 address.

crttMonIPLpdGrpStatsEntry entry .1.3.6.1.4.1.9.9.572.1.5.1

A list of additional objects needed for IPv6 addresses.

Indexes

No indexes recorded

Column Syntax OID

crttMonIPLpdGrpStatsTargetPEAddrType

An enumerated value which specifies the address type
of the target.
This object must be used along with the
crttMonIPLpdGrpStatsTargetPEAddr
object as it identifies the address family of the
address specified by that ob…

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.9.9.572.1.5.1.1

crttMonIPLpdGrpStatsTargetPEAddr

A string which specifies the address of the target PE.
This object, in conjunction with the
crttMonIPLpdGrpStatsTargetPEAddrType object,
may be used to specify either an IPv6 or an IPv4 address and is
an alternative to…

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.572.1.5.1.2

crttMonIPHistoryCollectionTable

table

.1.3.6.1.4.1.9.9.572.1.6 · 1 row entry · 2 columns

Open in standard view

An extension of the rttMonHistoryCollectionTable, defined in
the CISCO-RTTMON-MIB, which provides the additional
capability of specifying the target address as an
IPv6 address.

crttMonIPHistoryCollectionEntry entry .1.3.6.1.4.1.9.9.572.1.6.1

A list of additional objects needed for IPv6 addresses.

Indexes

No indexes recorded

Column Syntax OID

crttMonIPHistoryCollectionAddrType

An enumerated value which specifies the address type
of the target.
This object must be used along with the
crttMonIPHistoryCollectionAddress
object as it identifies the address family of the
address specified by that o…

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.9.9.572.1.6.1.1

crttMonIPHistoryCollectionAddress

A string which specifies the address of the target.
This object, in conjunction with the
crttMonIPHistoryCollectionAddrType object,
may be used to specify either an IPv6 or an IPv4 address and is
an alternative to the …

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.572.1.6.1.2

cipslaPercentileConfigTable

table

.1.3.6.1.4.1.9.9.572.1.7 · 1 row entry · 6 columns

Open in standard view

A table that contains percentile configurations. Each
conceptual row corresponds to the percentile
configuration for the probe defined in rttMonCtrlAdminTable.

cipslaPercentileConfigEntry entry .1.3.6.1.4.1.9.9.572.1.7.1

A list of objects that define a conceptual percentile
configuration control row.

Indexes

CISCO-RTTMON-MIBrttMonCtrlAdminIndex

Column	Syntax	OID
cipslaPercentileRTT Specifies the percentile value to use in percentile RTT calculations. ex. A 90% level will discard the highest 10% of all RTT values when calculating average RTT, max RTT, etc.	percentInteger32r/w Constraints: `range: 90-100`	`.1.3.6.1.4.1.9.9.572.1.7.1.1`
cipslaPercentileOWSD Specifies the percentile value to use in percentile one-way source to destination delay calculations. ex. A 90% level will discard the highest 10% of all one-way source to destination values when calculat…	percentInteger32r/w Constraints: `range: 90-100`	`.1.3.6.1.4.1.9.9.572.1.7.1.2`
cipslaPercentileOWDS Specifies the percentile value to use in percentile one-way destination to source delay calculations. ex. A 90% level will discard the highest 10% of all one-way destination to source values when calculat…	percentInteger32r/w Constraints: `range: 90-100`	`.1.3.6.1.4.1.9.9.572.1.7.1.3`
cipslaPercentileJitterSD Specifies the percentile value to use in percentile one-way source to destination jitter calculations. ex. A 90% level will discard the highest 10% of all one-way source to destination jitter values when …	percentInteger32r/w Constraints: `range: 90-100`	`.1.3.6.1.4.1.9.9.572.1.7.1.4`
cipslaPercentileJitterDS Specifies the percentile value to use in percentile one-way destination to source jitter calculations. ex. A 90% level will discard the highest 10% of all one-way destination to source jitter values when …	percentInteger32r/w Constraints: `range: 90-100`	`.1.3.6.1.4.1.9.9.572.1.7.1.5`
cipslaPercentileJitterAvg Specifies the percentile value to use in percentile average jitter calculations. ex. A 90% level will discard the highest 10% of all jitter values in both directions when calculating average, max, etc.	percentInteger32r/w Constraints: `range: 90-100`	`.1.3.6.1.4.1.9.9.572.1.7.1.6`

cipslaPercentileLatestStatsTable

table

.1.3.6.1.4.1.9.9.572.1.8 · 1 row entry · 7 columns

Open in standard view

A table that contains percentile statistics. Each
conceptual row corresponds to a percentile configuration
for the probe defined in cipslaPercentileConfigTable.
          
For each percentile configuration for a probe there is an entry
in
the table.
Each Probe can have multiple percentile configurations and
hence
there can be multiple rows for a particular probe.

cipslaPercentileLatestStatsEntry entry .1.3.6.1.4.1.9.9.572.1.8.1

A collection of objects that record the latest jitter
operation.

An entry is created only when the following
objects are valid and when the given percentile
type is configured to a non-default value.
…

Indexes

cipslaPercentileTypeVar CISCO-RTTMON-MIBrttMonCtrlAdminIndex

Column Syntax OID

cipslaPercentileTypeVar

This object specifies the type of percentile statistic
configured for a probe.

The percentile stat types 'rtt', 'owsd', 'owds', 'jittersd',
'jitterds' and 'jitteravg' may be configured for UDP jitter,
ICM…

Enumeration

Enumerated Values:

1	rtt
2	owsd
3	owds
4	jittersd
5	jitterds
6	jitteravg

.1.3.6.1.4.1.9.9.572.1.8.1.1

cipslaPercentileLatestMin

The minimum time of all retained samples.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.572.1.8.1.2

cipslaPercentileLatestMax

The maximum time of all retained samples.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.572.1.8.1.3

cipslaPercentileLatestAvg

The average time of all retained samples.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.572.1.8.1.4

cipslaPercentileLatestNum

The number of retained samples.

packetsSNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.572.1.8.1.5

cipslaPercentileLatestSum

The sum of times of retained samples.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.572.1.8.1.6

cipslaPercentileLatestSum2

The sum of squares of times of retained samples.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.572.1.8.1.7