CISCO-PORT-CHANNEL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
18

portChannelTable

table
.1.3.6.1.4.1.9.9.285.1.1.1 · 1 row entry · 12 columns
Open in standard view 
This table facilitates the creation and deletion of a
Port Channel interface to achieve higher bandwidths
than just one E_port. More than one E_port can be a 
member of an Port Channel port.
NOTE:Only E_ports can be members of an Port Channel
port.
          
A port is added to a Port Channel port by setting 
portChannelMemberList,and the 'manner' in which the 
agent performs the type of addition is determined 
by the value of portChannelAddType.
          
During the period when port(s) is being added to the
Port Channel, the agent will not allow to change any 
parameters of the port(s) being added. Also if the 
operation is successful (i.e. port(s) is added to the 
Port Channel) then also the agent will not allow to 
change any parameters of the individual port(s) that is
added. But any change done to the Port Channel port
will also be applied to the port(s) which are member(s)
of this Port channel port. Once a port(s) is removed
from a Port Channel Port it will retain the values that
it had when it was a member of the Port Channel port.
It will not have the old values it had before joining
the Port Channel port. 
          
The port(s) that are added/removed to/from a 
Port Channel port will be put into administratively
down (ifAdminStatus='down') which results into
operationally down(ifOperStatus='down'). To bring the 
port up again, the user has to set the port to be
administratively up(ifAdminStatus='up'). Then the port
goes through its initialization cycle to become 
active(ifOperStatus='up').
portChannelEntry entry .1.3.6.1.4.1.9.9.285.1.1.1.1
There is one entry in this table for each created
Port Channel port.
Indexes
portChannelIndex
Column Syntax OID
portChannelIndex
An index that uniquely identifies an entry in the
portChannelTable table.
Unsigned32
Constraints:
range: 1-2048
 .1.3.6.1.4.1.9.9.285.1.1.1.1.1
portChannelIfIndex
The ifIndex of this interface.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.9.9.285.1.1.1.1.2
portChannelAdminChannelMode
The channel mode desired by the network manager.
If this object is configured to be auto(1), then the
'portChannelOperChannelMode' will show the current
operating channel mode of port.
PortChannelModer/w
Textual Convention: PortChannelMode Enumeration
Type Values:
1auto
2on
3off
4desirable
 .1.3.6.1.4.1.9.9.285.1.1.1.1.3
portChannelOperChannelMode
The current operating channel mode of the port.
PortChannelMode
Textual Convention: PortChannelMode Enumeration
Type Values:
1auto
2on
3off
4desirable
 .1.3.6.1.4.1.9.9.285.1.1.1.1.4
portChannelAddType
The method to be adopted by the agent to add
port(s) to a Port Channel port.
If normal(1), then a compatibility check is done on the
parameters of the port(s) being added to this Port
Channel. The port(s) being added mu…
Enumerationr/w
Enumerated Values:
1normal
2force
 .1.3.6.1.4.1.9.9.285.1.1.1.1.5
portChannelLastActionStatus
The status of the last operation (add or remove a
member) done to change the member list of a Port
Channel Port.
When no ports are added or the last operation is
successful then this object will be successful(1).
If th…
Enumeration
Enumerated Values:
1successful
2failed
 .1.3.6.1.4.1.9.9.285.1.1.1.1.6
portChannelLastActionStatusCause
The cause of failure to last operation (add or remove
a member) done to change the member list of a Port
Channel port. This object will be zero length string
if 'portChannelLastActionStatus' is successful(1).
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.285.1.1.1.1.7
portChannelLastActionTime
The timestamp indicating the time of last action
performed on this entry.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.9.9.285.1.1.1.1.8
portChannelMemberList
The list of ifIndex's of the E_ports that are members
of this Port Channel port.
CISCO-ST-TCPortMemberListr/w
Textual Convention: CISCO-ST-TCPortMemberList OctetString
Type Constraints:
range: 0..64
 .1.3.6.1.4.1.9.9.285.1.1.1.1.9
portChannelCreationTime
The timestamp of this entry's creation time.
Note that at this creation time, a discontinuity occurs
in the statistic/error counters which are defined in
CISCO-FC-FE-MIB, and which are associated with this
Port Channel.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.9.9.285.1.1.1.1.10
portChannelRowStatus
The status of this conceptual row.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.9.285.1.1.1.1.11
portChannelMemberOperStatus
The list of port channel forwarding status of the
E_ports that are members of this Port Channel port.
Every four-byte is a status of the corresponding
member port represented by ifIndex in
portChannelMemberList.
The p…
CISCO-ST-TCPortMemberList
Textual Convention: CISCO-ST-TCPortMemberList OctetString
Type Constraints:
range: 0..64
 .1.3.6.1.4.1.9.9.285.1.1.1.1.12

portChannelGrpIfExtTable

table
.1.3.6.1.4.1.9.9.285.1.1.3 · 1 row entry · 1 columns
Open in standard view 
This table facilitates Channel Group specific
interface configurations.
portChannelGrpIfExtEntry entry .1.3.6.1.4.1.9.9.285.1.1.3.1
There is one entry in this table for each created
Port Channel port.
Indexes
IF-MIBifIndex
Column Syntax OID
portChannelGrpIfAutoCreation
This object indicates if this interface may be part of
automatically created Channel Groups (and therefore
Port Channels).
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.285.1.1.3.1.1

portChannelExtTable

table
.1.3.6.1.4.1.9.9.285.1.1.4 · 1 row entry · 5 columns
Open in standard view 
This table extends the portChannelTable to support Port
Channel Protocol.
portChannelExtEntry entry .1.3.6.1.4.1.9.9.285.1.1.4.1
There is one entry in this table for each created
Port Channel port. It contains an entry for every
Port Channel that is either automatically created or
manually configured.
Indexes
No indexes recorded
Column Syntax OID
portChannelExtChannelGrpMode
The admin channel group mode of this port channel.
PortChannelGroupModer/w
Textual Convention: PortChannelGroupMode Enumeration
Type Values:
1on
2active
 .1.3.6.1.4.1.9.9.285.1.1.4.1.1
portChannelExtAutoCreated
Indicates of this port channel was automatically
created.
Note that this object is valid only for Fibre Channel
port channels.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.285.1.1.4.1.2
portChannelExtPersistent
This object converts an auto-created port channel
to a persistent port channel when it is set to 'enable'.

No action is taken if this object is set to 'noOp'.
The value of the object when read is always '…
Enumerationr/w
Enumerated Values:
1noOp
2enable
 .1.3.6.1.4.1.9.9.285.1.1.4.1.3
portChannelExtOperChannelGrpMode
The operational channel group mode of this port channel.
PortChannelGroupMode
Textual Convention: PortChannelGroupMode Enumeration
Type Values:
1on
2active
 .1.3.6.1.4.1.9.9.285.1.1.4.1.4
portChannelExtFcipEnhanced
This object will enable or disable the FCIP (Fibre Channel
over Internet Protocol) enhanced capability for the port-channel.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.9.9.285.1.1.4.1.5