CISCO-PNNI-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
15

ciscoPnniNodeTable

table
.1.3.6.1.4.1.9.9.65.1.2.1 · 1 row entry · 5 columns
Open in standard view 
A table of cisco specific attributes that affect the
operation of a PNNI logical node.
ciscoPnniNodeEntry entry .1.3.6.1.4.1.9.9.65.1.2.1.1
An entry in the table, containing cisco specific
information about a node in this switching system.
Indexes
No indexes recorded
Column Syntax OID
ciscoPnniNodeAutoSummary
Specifies whether automatic generation of internal
summary address(es) based on the switch address(es) or
node ID is enabled. Automatically generated summary
addresses can only be removed by setting this object to
`fal…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.65.1.2.1.1.1
ciscoPnniNodeRedistributeStatic
Specifies whether redistribution of ATM static routes
to the PNNI routing domain is enabled. Exterior static
routes are advertised in exterior reachable address
PTSEs. Internal static routes are advertised in
internal…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.65.1.2.1.1.2
ciscoPnniNodePtseRequest
Specifies the maximum number of PTSEs that can be
requested in one PTSE request packet.
Integer32r/w
Constraints:
range: 1-1000
 .1.3.6.1.4.1.9.9.65.1.2.1.1.3
ciscoPnniNodeName
Specifies the textual name of the PNNI node. The node
name is distributed to all other nodes via PNNI
flooding, using a cisco specific encoding in the System
Capabilities information group. This allows all cisco
PNNI …
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.65.1.2.1.1.4
ciscoPnniNodeScopeMappingMode
Specifies the configuration mode of the mapping from
organizational scope values (used at UNI interfaces) to
PNNI scope (i.e., in terms of PNNI routing level
indicators).

In `automatic' mode, for each org…
Enumerationr/w
Enumerated Values:
1automatic
2manual
 .1.3.6.1.4.1.9.9.65.1.2.1.1.5

ciscoPnniIfTable

table
.1.3.6.1.4.1.9.9.65.1.3.1 · 1 row entry · 7 columns
Open in standard view 
A table of cisco specific attributes used to configure a
physical interface or subinterface on a switching system
which is capable of being used for PNNI routing.
Interfaces may represent physical connection points (i.e.
copper/fiber connection points) or VPCs which have been
configured for PNNI's use.
ciscoPnniIfEntry entry .1.3.6.1.4.1.9.9.65.1.3.1.1
An entry in the table, containing cisco specific PNNI
information about an interface in this switching system.
Indexes
No indexes recorded
Column Syntax OID
ciscoPnniIfLinkSelection
For CBR or VBR call setups, specifies a method for
selecting one link out of multiple links with sufficient
resources to the same neighbor node. Link selection
applies whenever the port specified in the Designated
Tran…
Enumerationr/w
Enumerated Values:
1adminWeightMinimize
2blockingMinimize
3transmitSpeedMaximize
4loadBalance
 .1.3.6.1.4.1.9.9.65.1.3.1.1.1
ciscoPnniIfRouteOptimization
To enable or disable the route optimization
(automatic rerouting) feature on an ATM interface.

To disable route optimization on the interface,
set this object to 'disable'.

To enable rou…
Enumerationr/w
Enumerated Values:
1disable
2soft
3switched
4switchedAndSoft
 .1.3.6.1.4.1.9.9.65.1.3.1.1.2
ciscoPnniIfRouteOptimInterval
Specifies how often route optimization takes
place on this interface. This object applies only when
the object ciscoPnniIfRouteOptimization is NOT set
to 'disable'.
minutesInteger32r/w
Constraints:
range: 10-10000
 .1.3.6.1.4.1.9.9.65.1.3.1.1.3
ciscoPnniIfRouteOptimStartHour
Specifies the start hour of Time-of-Day
route optimization on an ATM interface. This
object applies only when the object
ciscoPnniIfRouteOptimization is NOT set to
'disable'.
hourInteger32r/w
Constraints:
range: 0-23
 .1.3.6.1.4.1.9.9.65.1.3.1.1.4
ciscoPnniIfRouteOptimStartMinute
Specifies the start minute of Time-of-Day
route optimization on an ATM interface.
This object applies only when the object
ciscoPnniIfRouteOptimization is NOT set to
'disable'.
minutesInteger32r/w
Constraints:
range: 0-59
 .1.3.6.1.4.1.9.9.65.1.3.1.1.5
ciscoPnniIfRouteOptimEndHour
Specifies the end hour of Time-Of-Day
route optimization on an ATM interface.
This object applies only when the object
ciscoPnniIfRouteOptimization is NOT set to
'disable'.
hourInteger32r/w
Constraints:
range: 0-23
 .1.3.6.1.4.1.9.9.65.1.3.1.1.6
ciscoPnniIfRouteOptimEndMinute
Specifies the end minute of Time-Of-Day
route optimization on an ATM interface.
This object applies only when the object
ciscoPnniIfRouteOptimization is NOT set to
'disable'.
minutesInteger32r/w
Constraints:
range: 0-59
 .1.3.6.1.4.1.9.9.65.1.3.1.1.7

ciscoPnniPrecedenceTable

table
.1.3.6.1.4.1.9.9.65.1.4.1 · 1 row entry · 2 columns
Open in standard view 
A table that specifies the precedence of different types
of reachable addresses.
ciscoPnniPrecedenceEntry entry .1.3.6.1.4.1.9.9.65.1.4.1.1
An entry in the table, containing information about the
precedence of a specific reachable address type. One row
is created by the managed system for each reachable
address type.
Indexes
ciscoPnniPrecedenceAddressType
Column Syntax OID
ciscoPnniPrecedenceAddressType
The reachable address type for which the precedence is
specified.
Enumeration
Enumerated Values:
1staticLocalInternalWithMetrics
2staticLocalExterior
3staticLocalExteriorWithMetrics
4pnniRemoteInternal
5pnniRemoteInternalWithMetrics
6pnniRemoteExterior
7pnniRemoteExteriorWithMetrics
 .1.3.6.1.4.1.9.9.65.1.4.1.1.1
ciscoPnniPrecedenceValue
Specifies the precedence of a reachable address type.
When there are multiple reachable address types associated
with the longest match reachable address prefix, the route
selection algorithm first attempts to find rout…
Integer32r/w
Constraints:
range: 2-4
 .1.3.6.1.4.1.9.9.65.1.4.1.1.2

ciscoPnniRouteAddrTable

table
.1.3.6.1.4.1.9.9.65.1.5.1 · 1 row entry · 1 columns
Open in standard view 
A table of cisco specific attributes used to configure
cisco specific properties of ATM static routes.
ciscoPnniRouteAddrEntry entry .1.3.6.1.4.1.9.9.65.1.5.1.1
An entry in the table, containing cisco specific PNNI
information about a reachable address prefix.
Indexes
No indexes recorded
Column Syntax OID
ciscoPnniRouteAddrForwardingE164Address
The native E.164 address used as the called party address
when the call matching pnniRouteAddrAddress is forwarded
across the interface identified by pnniRouteAddrIfIndex.

If this address is specified, th…
E164Addressr/w
Textual Convention: E164Address OctetString
Type Constraints:
range: 0
range: 8
 .1.3.6.1.4.1.9.9.65.1.5.1.1.1