CISCO-OUTAGE-MONITOR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
24

cOutageHistoryTable

table
.1.3.6.1.4.1.9.9.280.1.2.3 · 1 row entry · 6 columns
Open in standard view 
A table of outage related events generated by this router.
Conceptual row entries are dynamically added into this 
table when outage related events occur.
          
Entries are stored in FIFO order.  When the maximum number 
of entries has been reached in the table, the oldest entry 
in the table is removed immediately.  
          
When a table is reduced to a smaller size N, the oldest
entries are immediately removed from the table leaving 
a maximum of N entries.
cOutageHistoryEntry entry .1.3.6.1.4.1.9.9.280.1.2.3.1
This entry contains information about an outage related
event which has been generated by this router.
Indexes
cOutageEventIndex
Column Syntax OID
cOutageEventIndex
An arbitrary non-zero integer value that uniquely
identifies a COutageHistoryEntry in the table.
The value of this table starts at '1' and monotonically
increases for each object failure and recovery event
received …
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.280.1.2.3.1.1
cOutageEventObjectType
This object specifies the monitored object's type.
It comprises interface(1), physicalEntity(2),
swProcess(3), remoteObject(4), and logicalEntity(5).

The detailed description has been presented above …
OutageMonObjectType
Textual Convention: OutageMonObjectType Enumeration
Type Values:
1interface
2physicalEntity
3swProcess
4remoteObject
5logicalEntity
 .1.3.6.1.4.1.9.9.280.1.2.3.1.2
cOutageEventMonObjectIndex
This object identifies a specific index of the
monitored object based upon the cOutageEventObjectType.
If it is interface(1), it correlates the object
with ifIndex in ifTable in the IF-MIB.
If it is physical…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.280.1.2.3.1.3
cOutageEventTypeIndex
The type of outage related event. The value
corresponds to an entry in the cOutageEventTypeMapTable.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.280.1.2.3.1.4
cOutageEventTime
This object specifies the date and time of the
event was generated.

The value of sysUpTime, which is reinitialized during
the router boot-up, is not sufficient, since it
shall be able to measure the …
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.9.9.280.1.2.3.1.5
cOutageEventInterval
Object that identifies the time duration between
transitions in available state of a component.
According to the cOutageEventTypeIndex, If the event type
is up, the interval time from the last down time is
TTR (Time …
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.280.1.2.3.1.6

cOutageEventTypeMapTable

table
.1.3.6.1.4.1.9.9.280.1.3.1 · 1 row entry · 3 columns
Open in standard view 
A table containing information about 
cOutageEventTypeMapIndex value mapping. 
Each conceptual row specifies a unique mapping 
between a cOutageEventTypeMapIndex value, and an 
outage related event type.
cOutageEventTypeMapEntry entry .1.3.6.1.4.1.9.9.280.1.3.1.1
A mapping between an event type and an event description.
Indexes
cOutageEventTypeMapIndex
Column Syntax OID
cOutageEventTypeMapIndex
This object uniquely identifies an event description.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.280.1.3.1.1.1
cOutageEventTypeName
The name of the outage related event.
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.9.9.280.1.3.1.1.2
cOutageEventTypeDescrText
This object specifies a human-readable
message describing information about the
outage related event.
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.280.1.3.1.1.3

cOutageObjectTable

table
.1.3.6.1.4.1.9.9.280.1.4.1 · 1 row entry · 6 columns
Open in standard view 
A table of monitored object entries generated 
by this router, which include interface, physical 
entry, and software process.
          
The conceptual row entries are initially established
during the monitoring start-up procedure based upon 
configuration set-up. The entries are also dynamically 
added into this table when a new object is detected. 
          
The entry information will be updated, when the outage 
related event occurs.
          
The entry will be removed only by configuration reset.
cOutageObjectEntry entry .1.3.6.1.4.1.9.9.280.1.4.1.1
An entry containing outage related information
applicable to a particular measurement object.
Indexes
cOutageObjectType cOutageMonitoredObjectIndex
Column Syntax OID
cOutageObjectType
This object specifies the monitored object's type.
It comprises interface(1), physicalEntity(2),
swProcess(3), remoteObject(4), and logicalEntity(5).

The detailed description has been presented above
…
OutageMonObjectType
Textual Convention: OutageMonObjectType Enumeration
Type Values:
1interface
2physicalEntity
3swProcess
4remoteObject
5logicalEntity
 .1.3.6.1.4.1.9.9.280.1.4.1.1.1
cOutageMonitoredObjectIndex
This object identifies a specific index of the
monitored object based upon the cOutageObjectType.
If it is interface(1), it correlates the object
with ifIndex in ifTable in the IF-MIB.
If it is PhysicalEntit…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.280.1.4.1.1.2
cOutageCurrentStatus
The current operational state of the monitored object.
The Up(1) state indicates that the monitored object is
actively or passively running in the normal condition.
The Down(2) state indicates that the monitored obje…
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.9.9.280.1.4.1.1.3
cOutageAOTSinceMeasureStarted
The total outage time in second of a component from the
beginning of the measurement. The table stores the outage
time up to the last recovery event. However, a request
comes in during the down status of a componen…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.280.1.4.1.1.4
cOutageNAFSinceMeasureStarted
The total number of failure instances from the beginning
of the measurement. Every failure event of a component
adds 1 to this object.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.280.1.4.1.1.5
cOutageRecordingStartTime
This object specifies the date and time of the
object to start outage recording.

The instance value of this cOutageRecordingStartTime
value is initialized to the time when the monitored
object is added …
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.9.9.280.1.4.1.1.6

cOutageCpmMapTable

table
.1.3.6.1.4.1.9.9.280.1.5.1 · 1 row entry · 3 columns
Open in standard view 
A table containing information about
cOutageMonitoredObjectIndex value mapping,
when the cOutageObjectType is swProcess.
Each conceptual row specifies a unique mapping
between a cOutageMonitoredObjectIndex value, and 
cpmCPUTotalIndex and cpmProcessPID in
cpmProcessTable in the CISCO-PROCESS-MIB.
cOutageCpmMapEntry entry .1.3.6.1.4.1.9.9.280.1.5.1.1
A mapping between an object index and a pair of cpm indexes.
Indexes
cOutageCpmMapIndex
Column Syntax OID
cOutageCpmMapIndex
This object uniquely identifies cpmCPUTotalIndex and
cpmProcessPID in CISCO-PROCESS-MIB. The cpmCPUTotalIndex
is used for the cpmCPUTotalTable reference. A pair of
{ cpmCPUTotalIndex, cpmProcessPID } is used for the …
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.280.1.5.1.1.1
cOutageCpmCPUTotalIndex
An index that uniquely represents a CPU in cpmCPUTotalTable
in CISCO-PROCESS-MIB.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.280.1.5.1.1.2
cOutageCpmProcessPID
This object contains the process ID. It identifies an
entry combined with cpmCPUTotalIndex in cpmProcessTable
in CISCO-PROCESS-MIB.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.280.1.5.1.1.3

cOutageRemoteObjMapTable

table
.1.3.6.1.4.1.9.9.280.1.6.1 · 1 row entry · 4 columns
Open in standard view 
A table containing information about
cOutageMonitoredObjectIndex value mapping,
when the cOutageObjectType is remoteObject.
Each conceptual row specifies a unique mapping
between a cOutageMonitoredObjectIndex value, and
a remote object related information such as the
object ID and the object description. 
Using IP ICMP protocol to monitor the remote object, 
the object ID can be Network Layer Address, which 
has been configured by users via configuration file 
or CLI.
cOutageRemoteObjMapEntry entry .1.3.6.1.4.1.9.9.280.1.6.1.1
A mapping between a remote object and a remote object
description.
Indexes
cOutageRemoteObjMapIndex
Column Syntax OID
cOutageRemoteObjMapIndex
This object uniquely identifies a remote object
description.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.280.1.6.1.1.1
cOutageRemoteObjIDType
Represents the type of address stored in
cOutageRemoteObjID.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.280.1.6.1.1.2
cOutageRemoteObjID
This object represents the Network Layer Address
of the remote object, which is configured by
users via configuration file or CLI.
It could be an IP address or DNS
depends on users input.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.280.1.6.1.1.3
cOutageRemoteObjDescrText
This object specifies a human-readable
message describing information about the
monitored remote components such as router name
or interface name, etc.
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.280.1.6.1.1.4

cOutageLogicalObjMapTable

table
.1.3.6.1.4.1.9.9.280.1.7.1 · 1 row entry · 2 columns
Open in standard view 
A table containing information about
cOutageMonitoredObjectIndex value mapping,
when the cOutageObjectType is logicalEntity.
Each conceptual row specifies a unique mapping
between a cOutageMonitoredObjectIndex value, and
a logical entity object related information such 
as the object description.
cOutageLogicalObjMapEntry entry .1.3.6.1.4.1.9.9.280.1.7.1.1
A mapping between a logical entity object and
a logical entity object description.
Indexes
cOutageLogicalObjMapIndex
Column Syntax OID
cOutageLogicalObjMapIndex
This object uniquely identifies a logical entity
object description.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.280.1.7.1.1.1
cOutageLogicalObjDescrText
This object specifies a human-readable
message describing a detailed information
about the monitored logical entity.
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.280.1.7.1.1.2