CISCO-LWAPP-SYS-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
9
Rows
9
Columns
59
.1.3.6.1.4.1.9.9.618.1.1.5.5.1
·
1 row entry
·
6 columns
This table represents of the network route entries of a switch.
Each entry in this table represents the network
route of a switch.
route of a switch.
Indexes
clsNetworkRouteIPAddressType clsNetworkRouteIPAddress
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
clsNetworkRouteIPAddressType
This objects represents network route IP
address type. |
INET-ADDRESS-MIBInetAddressType Textual Convention: INET-ADDRESS-MIBInetAddressType EnumerationType Values:
|
.1.3.6.1.4.1.9.9.618.1.1.5.5.1.1.1 |
||||||||||||||
|
clsNetworkRouteIPAddress
This objects represents the network route IP
address. |
INET-ADDRESS-MIBInetAddress Textual Convention: INET-ADDRESS-MIBInetAddress OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.9.9.618.1.1.5.5.1.1.2 |
||||||||||||||
|
clsNetworkRoutePrefixLength
This object specifies the prefix length for
route Inet address. |
Unsigned32r/w Constraints: range: 0-128 |
.1.3.6.1.4.1.9.9.618.1.1.5.5.1.1.3 |
||||||||||||||
|
clsNetworkRouteGatewayType
This object specifies gateway IP type
of network route. |
INET-ADDRESS-MIBInetAddressTyper/w Textual Convention: INET-ADDRESS-MIBInetAddressType EnumerationType Values:
|
.1.3.6.1.4.1.9.9.618.1.1.5.5.1.1.4 |
||||||||||||||
|
clsNetworkRouteGateway
This object specifies gateway IP
of network route. |
INET-ADDRESS-MIBInetAddressr/w Textual Convention: INET-ADDRESS-MIBInetAddress OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.9.9.618.1.1.5.5.1.1.5 |
||||||||||||||
|
clsNetworkRouteStatus
This object specifies status column for this
row and used to create and delete specific instances of rows in this table. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.9.9.618.1.1.5.5.1.1.6 |
cLSysLogConfigTable
table.1.3.6.1.4.1.9.9.618.1.1.6.1
·
1 row entry
·
4 columns
This table represents multiple syslog servers to which the the syslog messages will be sent to by the controller.
Each entry in this table provides information about
the host to which the syslog messages will be sent to.
the host to which the syslog messages will be sent to.
Indexes
cLSysLogServerIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
cLSysLogServerIndex
This object represents the index of the host to
which syslog messages will be sent. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.618.1.1.6.1.1.1 |
||||||||||||||
|
cLSysLogAddressType
This object represents the IP address type of
the host to which syslog messages will be sent. 'DNS' is used when the hostname of the server is configured. |
INET-ADDRESS-MIBInetAddressTyper/w Textual Convention: INET-ADDRESS-MIBInetAddressType EnumerationType Values:
|
.1.3.6.1.4.1.9.9.618.1.1.6.1.1.2 |
||||||||||||||
|
cLSysLogAddress
This object specifies the IP address or hostname
of the host to which syslog messages will be sent. |
INET-ADDRESS-MIBInetAddressr/w Textual Convention: INET-ADDRESS-MIBInetAddress OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.9.9.618.1.1.6.1.1.3 |
||||||||||||||
|
cLSysLogHostRowStatus
This is the status column for this row and is used
to create and delete specific instances of rows in this table. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.9.9.618.1.1.6.1.1.4 |
clsTransferConfigTable
table.1.3.6.1.4.1.9.9.618.1.1.8.1
·
1 row entry
·
14 columns
This table represent the server details which will be used by the controller to upload/ download files. The conceptual rows are statically populated by the agent during system boot up.
Each entry in this table provides information about
the server to which the controller will upload/download files
represented by clsTransferType and clsTransferMode.
the server to which the controller will upload/download files
represented by clsTransferType and clsTransferMode.
Indexes
clsTransferType clsTransferMode
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
clsTransferType
This object represents the type of operation
mode of the server by the controller. A value of download indicates that, mode of transfer is download A value of upload indicates that, mode of transfer is upload. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.9.9.618.1.1.8.1.1.1 |
||||||||||||||||||||||||||||||||
|
clsTransferMode
This object represents the protocol used by the server and the
controller to transfer a file. A value of tftp indicates that, transfer mode is tftp. A value of ftp indicates that, transfer mode is ftp. A value of sftp i… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.9.9.618.1.1.8.1.1.2 |
||||||||||||||||||||||||||||||||
|
clsTransferServerAddressType
This object specifies the server IP address
type to which the controller will transfer the file. |
INET-ADDRESS-MIBInetAddressTyper/w Textual Convention: INET-ADDRESS-MIBInetAddressType EnumerationType Values:
|
.1.3.6.1.4.1.9.9.618.1.1.8.1.1.3 |
||||||||||||||||||||||||||||||||
|
clsTransferServerAddress
This object specifies the server IP address
to which the controller will transfer the file. It is governed by clsTransferServerAddressType. |
INET-ADDRESS-MIBInetAddressr/w Textual Convention: INET-ADDRESS-MIBInetAddress OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.9.9.618.1.1.8.1.1.4 |
||||||||||||||||||||||||||||||||
|
clsTransferPath
This object specifies the directory path for file transfer.
The format depends on the host server. e.g. /tftpboot/code/ - in case of UNIX server c:\tftp\code - in case of DOS/Windows server |
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.9.9.618.1.1.8.1.1.5 |
||||||||||||||||||||||||||||||||
|
clsTransferFilename
This object specifies the file name for the file being
transferred from the controller. An example would be file path set to c:\tftp\code\ and file name set to e1r1v1.opr. |
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.9.9.618.1.1.8.1.1.6 |
||||||||||||||||||||||||||||||||
|
clsTransferFtpUsername
This object specifies the FTP username for
transferring file on the server. This is valid for FTP/SFTP transfer mode parameters. |
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.9.9.618.1.1.8.1.1.7 |
||||||||||||||||||||||||||||||||
|
clsTransferFtpPassword
This object specifies the FTP password for
transferring file on the server. This is valid for SFTP/FTP transfer mode parameters. It returns '****' when queried. |
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.9.9.618.1.1.8.1.1.8 |
||||||||||||||||||||||||||||||||
|
clsTransferFtpPortNum
This object specifies the port number to be used by
the FTP protocol while connecting to the server. This is valid only for FTP transfer mode. |
INET-ADDRESS-MIBInetPortNumberr/w Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32Type Constraints: range: 0..65535 |
.1.3.6.1.4.1.9.9.618.1.1.8.1.1.9 |
||||||||||||||||||||||||||||||||
|
clsTransferTftpMaxRetries
This object specifies maximum number of retries to be
allowed for a TFTP message packet before aborting the transfer operation. This is valid only for TFTP transfer mode. |
Unsigned32r/w Constraints: range: 1-254 |
.1.3.6.1.4.1.9.9.618.1.1.8.1.1.10 |
||||||||||||||||||||||||||||||||
|
clsTransferTftpTimeout
This object specifies timeout in seconds for a TFTP message
packet. This is valid only for TFTP transfer mode. |
secondsUnsigned32r/w Constraints: range: 1-254 |
.1.3.6.1.4.1.9.9.618.1.1.8.1.1.11 |
||||||||||||||||||||||||||||||||
|
clsTransferStart
This object specifies whether the file transfer
operation is initiated in active or standby. A value of none indicates that, no operation begins. A value of initiate indicates that, transfer of file begins on active. … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.9.9.618.1.1.8.1.1.12 |
||||||||||||||||||||||||||||||||
|
clsTransferStatus
This object represents the current status of a file
transfer operation. The following are valid only when clsTransferType is 'download' :- bootBreakOff(14), invalidTarFile(15). A value of unknown(1) indicates that, unk… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.9.9.618.1.1.8.1.1.13 |
||||||||||||||||||||||||||||||||
|
clsTransferStatusString
This object represents the current status of a file
transfer operation in human readable format. |
OctetString Constraints: range: 0-255 |
.1.3.6.1.4.1.9.9.618.1.1.8.1.1.14 |
clsApTransferTable
table.1.3.6.1.4.1.9.9.618.1.1.8.2.1
·
1 row entry
·
7 columns
This table represents the information about the 802.11 LWAPP Access Points that have joined to the controller. LWAPP APs exchange configuration messages with the controller and get the required configuration for their 802.11 related operations, after they join the controller.
Each entry in this table provides information about
one 802.11 LWAPP Access Point that has joined to
the controller.
Entries are removed when the APs lose their
association with the controller due to loss
of communica…
one 802.11 LWAPP Access Point that has joined to
the controller.
Entries are removed when the APs lose their
association with the controller due to loss
of communica…
Indexes
clsApTransferSysMacAddress
| Column | Syntax | OID |
|---|---|---|
|
clsApTransferSysMacAddress
This object represents the radio MAC address
of the AP and uniquely identifies an entry in this table. |
SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.9.9.618.1.1.8.2.1.1.1 |
|
clsApPrimaryVers
This object represents the primary image version of AP
|
OctetString Constraints: range: 0-64 |
.1.3.6.1.4.1.9.9.618.1.1.8.2.1.1.2 |
|
clsApBackupVers
This object represents the backup image version of AP
|
OctetString Constraints: range: 0-64 |
.1.3.6.1.4.1.9.9.618.1.1.8.2.1.1.3 |
|
clsApPredStatus
This object represents the status of predownload,
Initiated/failed/predownloading/backedoff |
OctetString Constraints: range: 0-64 |
.1.3.6.1.4.1.9.9.618.1.1.8.2.1.1.4 |
|
clsApPredFailReason
This object represents Failure reason for image download.
|
OctetString Constraints: range: 0-64 |
.1.3.6.1.4.1.9.9.618.1.1.8.2.1.1.5 |
|
clsApPredRetryCount
This object represents number of retries by AP to download
the image |
Unsigned32 Constraints: range: 1-254 |
.1.3.6.1.4.1.9.9.618.1.1.8.2.1.1.6 |
|
clsApPredNextRetryTime
This object represents the next retry time of
image download by AP. |
OctetString Constraints: range: 0-64 |
.1.3.6.1.4.1.9.9.618.1.1.8.2.1.1.7 |
clsPortModeConfigTable
table.1.3.6.1.4.1.9.9.618.1.1.14.1
·
1 row entry
·
6 columns
This table represents the entries for physical port related parameters.
Each entry contains the switch's physical port,
phyical mode related attribues. Each entry exists
for available physical interface. Entries
cannot be created or deleted by the user.
phyical mode related attribues. Each entry exists
for available physical interface. Entries
cannot be created or deleted by the user.
Indexes
clsPortDot1dBasePort
| Column | Syntax | OID | ||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
clsPortDot1dBasePort
This object represents unique unsigned integer value
which identifies the base port number. |
Unsigned32 Constraints: range: 1-65535 |
.1.3.6.1.4.1.9.9.618.1.1.14.1.1.1 |
||||||||||||||||||||||||||||||
|
clsPortModePhysicalMode
The object specifies the speed mode of switch port.
A value of autoNegotiate indicates that, port senses speed and negotiates with the port at the other end of the link for data transfer operation A value of half10 in… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.9.9.618.1.1.14.1.1.2 |
||||||||||||||||||||||||||||||
|
clsPortModePhysicalStatus
This object represents the switch port's current physical
speed status. A value of unknown indicates that, the speed of the port is not known A value of autoNegotiate indicates that, port senses speed and negotiates w… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.9.9.618.1.1.14.1.1.3 |
||||||||||||||||||||||||||||||
|
clsPortModeSfpType
This object represents the SFP type of the port.
When there is no SFP connected to the port, the string is represented with value as Not Present. |
SNMP-FRAMEWORK-MIBSnmpAdminString Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.9.9.618.1.1.14.1.1.4 |
||||||||||||||||||||||||||||||
|
clsPortUpDownCount
This object represents the total number of
up/down count of the port. Every time the value of ifOperStatus is changed, this MIB object should be incremented. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.618.1.1.14.1.1.5 |
||||||||||||||||||||||||||||||
|
clsPortModeMaxSpeed
The object specifies the maxspeed mode of MGIG port.
A value of full1000 indicates that, port will operate at maximum autonegotiated speed of 1000mbps or less. A value of full2500 indicates that, port will operate at… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.9.9.618.1.1.14.1.1.6 |
clsTrapBlacklistTable
table.1.3.6.1.4.1.9.9.618.1.1.25.1
·
1 row entry
·
3 columns
This table represents the trap blacklist. Traps in black list will be blocked while sending out.
Each entry in this table provides the name of trap
in trap blacklist.
in trap blacklist.
Indexes
clsBlacklistTrapIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
clsBlacklistTrapIndex
This object represents trap uniquely in blacklist.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.618.1.1.25.1.1.1 |
||||||||||||
|
clsTrapNameInBlacklist
This object specifies name of trap in trap blacklist.
|
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.9.9.618.1.1.25.1.1.2 |
||||||||||||
|
clsTrapBlacklistRowStatus
This is the status column for this row and used
to create and delete specific instances of rows in this table. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.9.9.618.1.1.25.1.1.3 |
clsIconCfgTable
table.1.3.6.1.4.1.9.9.618.1.1.28
·
1 row entry
·
6 columns
This table represents the generic icon file configuration in the controller. It has only one argument; the icon file name which shall be used to index the rows in this table.
Each entry in this table represents the icon config entry
Indexes
clsIconCfgFileName
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
clsIconCfgFileName
This object represents the icon filename
|
OctetString Constraints: range: 1-32 |
.1.3.6.1.4.1.9.9.618.1.1.28.1.1 |
||||||||||||
|
clsIconCfgFileType
This object specifies the filetype of the icon file
|
OctetStringr/w Constraints: range: 1-32 |
.1.3.6.1.4.1.9.9.618.1.1.28.1.2 |
||||||||||||
|
clsIconCfgLangCode
This object specifies the language code associated
with the icon file |
OctetStringr/w Constraints: range: 2-3 |
.1.3.6.1.4.1.9.9.618.1.1.28.1.3 |
||||||||||||
|
clsIconCfgWidth
This object specifies the width of the icon file
|
Unsigned32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.9.9.618.1.1.28.1.4 |
||||||||||||
|
clsIconCfgHeight
This object specifies the height of the icon file
|
Unsigned32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.9.9.618.1.1.28.1.5 |
||||||||||||
|
clsIconCfgRowStatus
This object specifies status column for this row
and used to create and delete specific instances of rows in this table. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.9.9.618.1.1.28.1.6 |
clsRAIDStatusTable
table.1.3.6.1.4.1.9.9.618.1.2.2
·
1 row entry
·
3 columns
This table represents the RAID and rebuild status.
Each entry in this table provides RAID drive status.
Indexes
clsRAIDDriveNumber
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
clsRAIDDriveNumber
This object indicates drive number in the system.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.618.1.2.2.1.1 |
||||||||
|
clsRAIDStatus
This object represents the status of the drive.
A value of good indicates that, hard disk in RAID volume is good. A value of bad indicates that, hard disk in RAID volume is bad. A value of badstartrebuild indicates t… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.9.9.618.1.2.2.1.2 |
||||||||
|
clsRAIDRebuildPercentage
This object represents the rebuild percentage of drive.
This object is applicable only when RAID status is rebuilding. |
PercentSNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.618.1.2.2.1.3 |
clsSysPingTestTable
table.1.3.6.1.4.1.9.9.618.1.2.3
·
1 row entry
·
10 columns
This table represents the test ping entries
Each Entry (conceptual row) in the clsSysPingTest Table
represents a ping test id.
represents a ping test id.
Indexes
clsSysPingTestId
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
clsSysPingTestId
This object represents the index of pingtest ID
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.9.9.618.1.2.3.1.1 |
||||||||||||||
|
clsSysPingTestIPAddressType
This object specifies the IP address type
|
INET-ADDRESS-MIBInetAddressTyper/w Textual Convention: INET-ADDRESS-MIBInetAddressType EnumerationType Values:
|
.1.3.6.1.4.1.9.9.618.1.2.3.1.2 |
||||||||||||||
|
clsSysPingTestIPAddress
This object specifies the IP address of the
device to which ping test to perform |
INET-ADDRESS-MIBInetAddressr/w Textual Convention: INET-ADDRESS-MIBInetAddress OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.9.9.618.1.2.3.1.3 |
||||||||||||||
|
clsSysPingTestSendCount
This object specifies the number of bytes sent
|
BytesInteger32r/w Constraints: range: 1-100 |
.1.3.6.1.4.1.9.9.618.1.2.3.1.4 |
||||||||||||||
|
clsSysPingTestReceivedCount
This object represents the number of bytes received.
|
BytesSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.9.9.618.1.2.3.1.5 |
||||||||||||||
|
clsSysPingTestStatus
This object represents status of the ping test.
A value of inprogress indicates that, ping test in progress. A value of complete indicates that, ping test is complete. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.9.9.618.1.2.3.1.6 |
||||||||||||||
|
clsSysPingTestMaxTimeInterval
This object represents maximum time interval in msec.
|
mSecSNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.618.1.2.3.1.7 |
||||||||||||||
|
clsSysPingTestMinTimeInterval
This object represents minimum time interval in msec.
|
mSecSNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.618.1.2.3.1.8 |
||||||||||||||
|
clsSysPingTestAvgTimeInterval
This object represents average time interval in msec.
|
mSecSNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.618.1.2.3.1.9 |
||||||||||||||
|
clsSysPingTestRowStatus
This is the status column for this row and used
to create and delete specific instances of rows in this table. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.9.9.618.1.2.3.1.10 |