CISCO-LWAPP-DOT11-CLIENT-CALIB-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
12

cLD11ClientCalibTable

table
.1.3.6.1.4.1.9.9.522.1.1.1 · 1 row entry · 8 columns
Open in standard view 
This table represents the calibration for the
802.11 wireless clients that would associate
to the APs that have joined this controller.
          
An entry is created through an explicit management
action initiated by the administrator through a
network management station by specifying the
calibration parameters for a particular client
identified by cLD11ClientCalibMacAddress and setting
the RowStatus object to 'createAndGo'.  An existing
entry is deleted by setting the RowStatus object to 
'destroy'.  The object cLD11ClientCalibTableMaxEntries
represents the maximum number of entries in this
table.
cLD11ClientCalibEntry entry .1.3.6.1.4.1.9.9.522.1.1.1.1
Each entry represents a conceptual row in this
table and provides the information about the
calibration parameters for wireless clients.
Indexes
cLD11ClientCalibMacAddress
Column Syntax OID
cLD11ClientCalibMacAddress
This object specifies the MAC address of the
802.11 wireless client for which the
calibration parameters in this entry are
applicable and uniquely identifies this entry.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.9.9.522.1.1.1.1.1
cLD11ClientCalibBeaconInterval deprecated
This object specifies the time interval, expressed
here in hundredths of a second at which an AP
issues radio measurement request messages to a
client for every SSID. It is not recommended to
configure values less than…
hundredths-secondsInteger32r/w
Constraints:
range: 400-3240000
 .1.3.6.1.4.1.9.9.522.1.1.1.1.2
cLD11ClientCalibRowStatus
The object that represents the status of a
specific instance of a row in this table.
Initially set to a value of 'createAndGo' by
the User when a row is created, the status
as represented by this object is automatically…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.9.522.1.1.1.1.3
cLD11ClientCalibNumberOfRadios
This object specifies the number of radios
used in this calibration.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.522.1.1.1.1.4
cLD11ClientCalibNumberOfSamples
This object specifies the number of RSSI samples for
a given radio, used in this calibration.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.522.1.1.1.1.5
cLD11ClientCalibSamplesCollected
This object indicates the number of
samples available for this client.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.522.1.1.1.1.6
cLD11ClientCalibBeaconIntervalExt
This object specifies the time interval, expressed
here in hundredths of a second at which an AP
issues radio measurement request messages to a
client for every SSID. It is not recommended to
configure values less than…
hundredths-secondsSNMPv2-TCTimeIntervalr/w
Textual Convention: SNMPv2-TCTimeInterval Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.522.1.1.1.1.7
cLD11ClientCalibStorageType
This object specifies the storage type of this
conceptual row.
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
 .1.3.6.1.4.1.9.9.522.1.1.1.1.8

cLD11ClientCalibDataTable

table
.1.3.6.1.4.1.9.9.522.1.2.1.1 · 1 row entry · 4 columns
Open in standard view 
This table contains the RSSI data samples
collected for 802.11 client based on the 
information provided in the cldccLD11ClientCalibTable.
Entries are automatically added by the controller
as and when samples are available.
This data is used by the NMS for location
calibration of the 8022.11 clients.
cLD11ClientCalibDataEntry entry .1.3.6.1.4.1.9.9.522.1.2.1.1.1
Each entry represents a conceptual row in this
table and provides the information about the
samples for location calibration of a 802.11
client.
Indexes
cLD11ClientCalibMacAddress CISCO-LWAPP-AP-MIBcLApSysMacAddress CISCO-LWAPP-AP-MIBcLApDot11IfSlotId clD11ClientCalibDataTimeStamp clD11ClientCalibDataAntennaIndex
Column Syntax OID
clD11ClientCalibDataTimeStamp
This object indicates the time this sample was
collected. This is the absolute system time that
this sample was collected.
millisecondsSNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.9.9.522.1.2.1.1.1.1
clD11ClientCalibDataAntennaIndex
This object indicates the antenna which
received the probe request from client.
Enumeration
Enumerated Values:
1antenna1
2antenna2
 .1.3.6.1.4.1.9.9.522.1.2.1.1.1.2
clD11ClientCalibDataRssiValue
This object indicates the RSSI value for this
sample.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.522.1.2.1.1.1.3
clD11ClientCalibDataTransmitPower
This object indicates the transmit power level for
a calibrating client.
dbmSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.522.1.2.1.1.1.4