CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
15
Rows
15
Columns
44

cldccDiagDhcpTestReqTable

table
.1.3.6.1.4.1.9.9.599.3.2.0.1.1 · 1 row entry · 1 columns
Open in standard view 
This table contains request params for dhcp test to
be performed by the client.
cldccDiagDhcpTestReqEntry entry .1.3.6.1.4.1.9.9.599.3.2.0.1.1.1
There is an entry in the table identified by the
client mac address.
Indexes
CISCO-LWAPP-DOT11-CLIENT-MIBcldcClientMacAddress
Column Syntax OID
cldccDiagDhcpTestReqRowStatus
This field is used to add/remove entries from this
table.To add a row in this table, createAndGo row status
will be used.To remove a row, this field will be set to
destroy.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.9.599.3.2.0.1.1.1.1

cldccDiagPingTestReqTable

table
.1.3.6.1.4.1.9.9.599.3.2.0.1.2 · 1 row entry · 2 columns
Open in standard view 
This table contains the parameters for DNS ping test
request.
cldccDiagPingTestReqEntry entry .1.3.6.1.4.1.9.9.599.3.2.0.1.2.1
There is an entry in the table where each entry is identified
by the client mac address.
Indexes
CISCO-LWAPP-DOT11-CLIENT-MIBcldcClientMacAddress
Column Syntax OID
cldccDiagPingTestType
This field is used to distinguish the type of
test.It can be a ping to the dns server or the
default gateway.
Enumerationr/w
Enumerated Values:
1dns-server
2default-gw
 .1.3.6.1.4.1.9.9.599.3.2.0.1.2.1.1
cldccDiagPingTestReqRowStatus
This field is used to add/remove entries from this
table.To add a row in this table, createAndGo row status
will be used.To remove a row, this field will be set to
destroy.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.9.599.3.2.0.1.2.1.2

cldccDiagDnsNameResolTestReqTable

table
.1.3.6.1.4.1.9.9.599.3.2.0.1.3 · 1 row entry · 2 columns
Open in standard view 
This table contains Dns Name resolution request 
params to be used for sending out a Diagnostic
request to a client for resolving a network name.
cldccDiagDnsNameResolTestReqEntry entry .1.3.6.1.4.1.9.9.599.3.2.0.1.3.1
There is an entry in the table where each entry
is identified by the client mac address.
Indexes
CISCO-LWAPP-DOT11-CLIENT-MIBcldcClientMacAddress
Column Syntax OID
cldccDiagDnsNameResolTestReqNetworkName
This is the name of the network which will be
resolved by the client and the result reported
to the controller.
OctetStringr/w
Constraints:
range: 1-256
 .1.3.6.1.4.1.9.9.599.3.2.0.1.3.1.1
cldccDiagDnsNameResolTestReqRowStatus
This field is used to add/remove entries from this
table.To add a row in this table, createAndGo row
status will be used.To remove a row, this field
will be set to destroy.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.9.599.3.2.0.1.3.1.2

cldccDiagAssociationTestReqTable

table
.1.3.6.1.4.1.9.9.599.3.2.0.1.4 · 1 row entry · 6 columns
Open in standard view 
This table contains association test request values
for various clients.
cldccDiagAssociationTestReqEntry entry .1.3.6.1.4.1.9.9.599.3.2.0.1.4.1
There is an entry in the table for each entry
identified by the client mac address.
Indexes
CISCO-LWAPP-DOT11-CLIENT-MIBcldcClientMacAddress
Column Syntax OID
cldccDiagAssocTestReqBssid
This is the bssid of the AP which the client
has to try connecting to as a part of association
test.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.9.9.599.3.2.0.1.4.1.1
cldccDiagAssocTestReqSsid
This is the name of the SSID which the client has
to try connecting to as a part of association test.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.9.9.599.3.2.0.1.4.1.2
cldccDiagAssocTestReqChannel
This is channel number on which the client will
try to connect to the AP.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.599.3.2.0.1.4.1.3
cldccDiagAssocTestReqBand
This is band on which the client will
try to connect to the AP.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.599.3.2.0.1.4.1.4
cldccDiagAssocTestReqPhyType
This is phy type.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.599.3.2.0.1.4.1.5
cldccDiagAssocTestReqRowStatus
This field is used to add/remove entries from this
table.To add a row in this table, createAndGo row
status will be used.To remove a row, this field
will be set to destroy.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.9.599.3.2.0.1.4.1.6

cldccDiagAuthenticationTestReqTable

table
.1.3.6.1.4.1.9.9.599.3.2.0.1.5 · 1 row entry · 6 columns
Open in standard view 
This table contains association test request values
for various clients.
cldccDiagAuthenticationTestReqEntry entry .1.3.6.1.4.1.9.9.599.3.2.0.1.5.1
There is an entry in the table for each entry
identified by the client mac address.
Indexes
CISCO-LWAPP-DOT11-CLIENT-MIBcldcClientMacAddress
Column Syntax OID
cldccDiagAuthenticationTestReqBssid
This is the name of the AP which the client has to try
connecting to as a part of authentication test.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.9.9.599.3.2.0.1.5.1.1
cldccDiagAuthenticationTestReqProfileId
This is the name of the ProfileId which the client has to try
connecting to as a part of authentication test.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.599.3.2.0.1.5.1.2
cldccDiagAuthenticationTestReqChannel
This attribute represents the channel number.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.599.3.2.0.1.5.1.3
cldccDiagAuthenticationTestReqBand
This attribute represents the band.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.599.3.2.0.1.5.1.5
cldccDiagAuthenticationTestReqPhyType
This attribute represents the phy type.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.599.3.2.0.1.5.1.6
cldccDiagAuthenticationTestReqRowStatus
This field is used to add/remove entries from this
table.To add a row in this table,createAndGo row
status will be used.To remove a row, this field will
be set to destroy.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.9.599.3.2.0.1.5.1.9

cldccDiagMsgDisplayReqTable

table
.1.3.6.1.4.1.9.9.599.3.2.0.1.6 · 1 row entry · 2 columns
Open in standard view 
This table contains message display request values for
various clients.
cldccDiagMsgDisplayReqEntry entry .1.3.6.1.4.1.9.9.599.3.2.0.1.6.1
There is an entry in the table for each entry
identified by the client mac address.
Indexes
CISCO-LWAPP-DOT11-CLIENT-MIBcldcClientMacAddress
Column Syntax OID
cldccDiagMsgDisplayMsgType
This attribute represents the type of message
to be displayed.
Enumerationr/w
Enumerated Values:
1invalid-ssid
2invalid-network-settings
3wlan-capability-mismatch
4bad-credentials
5call-support
6problem-resolved
7resolution-incomplete
8try-again-later
9user-action-required
10trouble-shooting-refused-by-network
11retrieving-client-reports
12retrieving-client-logs
13retrieval-complete
14begining-association-test
15begining-dhcp-test
16begining-network-connectivity-test
17begining-dns-ping-test
18begining-name-resolution-test
19begining-dot1x-test
20redirecting-client-to-a-profile
21test-complete
22test-passed
23test-failed
24cancel-diag-channel-operation
25log-retrieval-refused
26client-report-retrieval-refused
27test-request-refused-by-client
28invalid-network-address
29known-problem-with-network
30scheduled-maint-period
31wlan-security-incorrect
32waln-encryption-incorrect
33wlan-auth-incorrect
 .1.3.6.1.4.1.9.9.599.3.2.0.1.6.1.1
cldccDiagMsgDisplayReqRowStatus
This field is used to add/remove entries from this table.
To add a row in this table, createAndGo row status will
be used.To remove a row, this field will be set to
destroy.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.9.599.3.2.0.1.6.1.2

cldccDiagProfileRedirectReqTable

table
.1.3.6.1.4.1.9.9.599.3.2.0.1.7 · 1 row entry · 2 columns
Open in standard view 
This table contains profile redirect request values for
various clients.
cldccDiagProfileRedirectReqEntry entry .1.3.6.1.4.1.9.9.599.3.2.0.1.7.1
There is an entry in the table for each entry
identified by the client mac address.
Indexes
CISCO-LWAPP-DOT11-CLIENT-MIBcldcClientMacAddress
Column Syntax OID
cldccDiagProfileRedirectReqProfileId
This attribute represents the profile Id
to which the client should be redirected.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.599.3.2.0.1.7.1.1
cldccDiagProfileRedirectReqRowStatus
This field is used to add/remove entries from this table.
To add a row in this table, createAndGo row status will
be used.To remove a row, this field will be set to
destroy.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.9.599.3.2.0.1.7.1.2

cldccDiagDhcpTestRespTable

table
.1.3.6.1.4.1.9.9.599.3.2.0.2.1 · 1 row entry · 1 columns
Open in standard view 
This table contains response for dhcp 
test performed by the client.
cldccDiagDhcpTestRespEntry entry .1.3.6.1.4.1.9.9.599.3.2.0.2.1.1
There is an entry in the table
identified by the client mac address.
Indexes
CISCO-LWAPP-DOT11-CLIENT-MIBcldcClientMacAddress
Column Syntax OID
cldccDiagDhcpTestRespDhcpOffer
This field will have the complete set
of DHCP options returned in the DHCP Offer.
OctetString
Constraints:
range: 1-256
 .1.3.6.1.4.1.9.9.599.3.2.0.2.1.1.1

cldccDiagPingTestRespTable

table
.1.3.6.1.4.1.9.9.599.3.2.0.2.2 · 1 row entry · 7 columns
Open in standard view 
This table contains response for Dns ping test 
request.
cldccDiagPingTestRespEntry entry .1.3.6.1.4.1.9.9.599.3.2.0.2.2.2
There is an entry in the table where each entry is
identified by the client mac address.
Indexes
CISCO-LWAPP-DOT11-CLIENT-MIBcldcClientMacAddress
Column Syntax OID
cldccDiagPingTestRespIPAddressType
The value of this field shall be the IP address
type of the destination of the ICMP echo
request frames.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.599.3.2.0.2.2.2.1
cldccDiagPingTestRespIPAddress
The value of this field shall be the IP address
of the destination of the ICMP Echo Request
frames.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.599.3.2.0.2.2.2.2
cldccDiagPingTestRespDestMacAddress
The value of this field shall be the MAC address
of the destination of the ICMP Echo Request
frames.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.9.9.599.3.2.0.2.2.2.3
cldccDiagPingTestRespPingsSent
The value of this field shall be the number
of ICMP Echo Request frames sent.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.599.3.2.0.2.2.2.4
cldccDiagPingTestRespPingsReceived
The value of this field shall be the number of
ICMP Echo Response frames received.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.599.3.2.0.2.2.2.5
cldccDiagPingTestRespMinEchoTIme
The value of this field shall be the shortest time,in
milliseconds, between the transmission of an ICMP echo
request frame and the receipt of the corresponding ICMP
Echo Response frame.
CISCO-TCCiscoMilliSeconds
Textual Convention: CISCO-TCCiscoMilliSeconds Unsigned32
 .1.3.6.1.4.1.9.9.599.3.2.0.2.2.2.6
cldccDiagPingTestRespMaxEchoTIme
The value of this field shall be the longest time
in milliseconds,between the transmission of an ICMP
echo Request between the transmission of an ICMP echo
request frame and the receipt of the corresponding
ICMP echo r…
CISCO-TCCiscoMilliSeconds
Textual Convention: CISCO-TCCiscoMilliSeconds Unsigned32
 .1.3.6.1.4.1.9.9.599.3.2.0.2.2.2.7

cldccDiagDnsNameResolTestRespTable

table
.1.3.6.1.4.1.9.9.599.3.2.0.2.3 · 1 row entry · 3 columns
Open in standard view 
This table contains Dns Name Resolution test results
sent by the client to the controller.
cldccDiagDnsNameResolTestRespEntry entry .1.3.6.1.4.1.9.9.599.3.2.0.2.3.1
There is an entry in the table where each entry is
identified by a client mac address.
Indexes
CISCO-LWAPP-DOT11-CLIENT-MIBcldcClientMacAddress
Column Syntax OID
cldccDiagDnsNameResolTestRespIpAddressType
This is type of the ip address of the
DNS server whose name was sent in the
request.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.599.3.2.0.2.3.1.1
cldccDiagDnsNameResolTestRespIpAddress
This is the ip address of the DNS server
whose name was sent in the request.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.599.3.2.0.2.3.1.2
cldccDiagDnsNameResolTestRespServerName
This is the name of the server whose
ip address was resolved.
OctetString
Constraints:
range: 1-256
 .1.3.6.1.4.1.9.9.599.3.2.0.2.3.1.3

cldccDiagAssociationTestRespTable

table
.1.3.6.1.4.1.9.9.599.3.2.0.2.4 · 1 row entry · 2 columns
Open in standard view 
This table contains association test
response values for various clients.
cldccDiagAssociationTestRespEntry entry .1.3.6.1.4.1.9.9.599.3.2.0.2.4.4
There is an entry in the table for each entry
identified by the client mac address.
Indexes
CISCO-LWAPP-DOT11-CLIENT-MIBcldcClientMacAddress
Column Syntax OID
cldccDiagAssociationTestRespIsAssocComplete
Value of this field shall be 1 if the 802.11
association concluded normally,0 otherwise.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.599.3.2.0.2.4.4.1
cldccDiagAssocTestRespReturnedStatus
Value of this field shall be the value returned
in the final 802.11 association response frame
during the test.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.599.3.2.0.2.4.4.2

cldccDiagAuthenticationTestRespTable

table
.1.3.6.1.4.1.9.9.599.3.2.0.2.5 · 1 row entry · 3 columns
Open in standard view 
This table contains authentication test response 
values for various clients.
cldccDiagAuthenticationTestRespEntry entry .1.3.6.1.4.1.9.9.599.3.2.0.2.5.5
There is an entry in the table for each entry
identified by the client mac address.
Indexes
CISCO-LWAPP-DOT11-CLIENT-MIBcldcClientMacAddress
Column Syntax OID
cldccDiagAuthenticationTestRespIsCompleted
Value of this field shall be 1 if the 802.11
association concluded normally,0 otherwise.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.599.3.2.0.2.5.5.1
cldccDiagAuthenticationTestRespReturnedStatus
Value of this field shall be the value returned in
the final 802.11 authentication response frame
during the test
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.599.3.2.0.2.5.5.2
cldccDiagAuthenticationTestRespEAPMethod
Value of this field shall be the EAP method returned
in the final 802.11 authentication response frame
during the test.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.599.3.2.0.2.5.5.3

cldccDiagMsgDisplayRespTable

table
.1.3.6.1.4.1.9.9.599.3.2.0.2.6 · 1 row entry · 1 columns
Open in standard view 
This table contains message display request values
for various clients.
cldccDiagMsgDisplayRespEntry entry .1.3.6.1.4.1.9.9.599.3.2.0.2.6.1
There is an entry in the table for each entry
identified by the client mac address.
Indexes
CISCO-LWAPP-DOT11-CLIENT-MIBcldcClientMacAddress
Column Syntax OID
cldccDiagMsgDisplayRespString
This is string which was sent to the client for display.
OctetString
Constraints:
range: 1-256
 .1.3.6.1.4.1.9.9.599.3.2.0.2.6.1.1

cldccDiagTestLoggedFrameTable

table
.1.3.6.1.4.1.9.9.599.3.2.0.2.8 · 1 row entry · 4 columns
Open in standard view 
This table contains logged frame data.
cldccDiagTestLoggedFrameEntry entry .1.3.6.1.4.1.9.9.599.3.2.0.2.8.1
There is an entry in the table where each entry
is identified by the client mac address.
Indexes
CISCO-LWAPP-DOT11-CLIENT-MIBcldcClientMacAddress cldccDiagTestLoggedFrameIndex
Column Syntax OID
cldccDiagTestLoggedFrameIndex
The value of this field shall be the ordinal
value of the logged frame.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.599.3.2.0.2.8.1.1
cldccDiagTestLoggedFrameDirection
The value of this field shall be zero,
when the logged frame in the Frame Content field
is sent from (transmitted by) the client.
It shall be one, otherwise.
Enumeration
Enumerated Values:
0up
1down
 .1.3.6.1.4.1.9.9.599.3.2.0.2.8.1.2
cldccDiagTestLoggedFrameTimeStamp
The value of this field shall be the
timestamp value of the logged frame.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.9.9.599.3.2.0.2.8.1.3
cldccDiagTestLoggedFrameData
The value of this field shall be the actual
frame that was transmitted or received.
OctetString
Constraints:
range: 1-4096
 .1.3.6.1.4.1.9.9.599.3.2.0.2.8.1.4

cldccDiagTestStatusTable

table
.1.3.6.1.4.1.9.9.599.3.2.0.3.1 · 1 row entry · 2 columns
Open in standard view 
This table contains the status params for 
all the tests performed on the client.
cldccDiagTestStatusEntry entry .1.3.6.1.4.1.9.9.599.3.2.0.3.1.1
There is an entry in the table identified by the
client mac address.
Indexes
CISCO-LWAPP-DOT11-CLIENT-MIBcldcClientMacAddress
Column Syntax OID
cldccDiagTestLastTestStatus
This field is used to represent the status of the
last test performed.
CiscoLwappCcxDiagTestStatus
Textual Convention: CiscoLwappCcxDiagTestStatus Enumeration
Type Values:
0successful
1pending
3timeout
4stopped
5mismatch
 .1.3.6.1.4.1.9.9.599.3.2.0.3.1.1.1
cldccDiagTestLastResponseStatus
This field is used to represent the response of the
last test performed.
CiscoLwappCcxDiagResponseStatus
Textual Convention: CiscoLwappCcxDiagResponseStatus Enumeration
Type Values:
0successful
1fail
3refused
4incapable
5unknown
 .1.3.6.1.4.1.9.9.599.3.2.0.3.1.1.2