CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

ciscoL4L7ResourceClassTable

table

.1.3.6.1.4.1.9.9.480.1.1.1 · 1 row entry · 3 columns

Open in standard view

This table contains one row per resource class.
This table is used for adding/deleting the resource 
class in the system.  A resource class can contain
limits for different category of resources and
these resources can be configured using other tables.

ciscoL4L7ResourceClassEntry entry .1.3.6.1.4.1.9.9.480.1.1.1.1

Information about a particular resource class.
Each entry provides the name of class.
The entPhysicalIndex refers to resource manageable
component in entPhysicalTable with
entPhysicalClass -> 'module'.

Indexes

ENTITY-MIBentPhysicalIndex crlResourceClassName

Column Syntax OID

crlResourceClassName

This object identifies a unique resource class
in a resource manageable component identified
by entPhysicalIndex.

CiscoResourceClass

Textual Convention: CiscoResourceClass OctetString

Type Constraints:
range: 0..64

.1.3.6.1.4.1.9.9.480.1.1.1.1.1

crlResourceClassStorageType

The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row.
This object can not be modified when the value of
crlResourceClassRo…

SNMPv2-TCStorageTyper/w

Textual Convention: SNMPv2-TCStorageType Enumeration

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

.1.3.6.1.4.1.9.9.480.1.1.1.1.2

crlResourceClassRowStatus

This object is used for adding/deleting
resource classes in a system.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.9.9.480.1.1.1.1.3

ciscoL4L7ResourceLimitTable

table

.1.3.6.1.4.1.9.9.480.1.1.2 · 1 row entry · 9 columns

Open in standard view

This table is used for adding resource limits
to resources in a resource class.

ciscoL4L7ResourceLimitEntry entry .1.3.6.1.4.1.9.9.480.1.1.2.1

Information about a particular resource in a resource
class. Each entry provides the type of resource,
the limit that is supported for that resource
and type of the limit value.

Indexes

crlResourceClassName crlResourceLimitType

Column Syntax OID

crlResourceLimitType

This object represents the type of
resource in a resource class identified
by crlResourceClassName.

CiscoResourceLimitType

Textual Convention: CiscoResourceLimitType Enumeration

Type Values:

1	all
2	macAddresses
3	concurrentConns
4	mgmtConnections
5	proxyConns
6	probes
7	stickyEntries
8	natTranslations
9	regexState
10	aclMemory
11	syslogBuffer
12	ipReassemBuffer
13	tcpOOOBuffer
14	sslConnections
15	hosts
16	ipsecSessions
17	asdmSessions
18	sshSessions
19	telnetSessions
20	cpu
21	memory

.1.3.6.1.4.1.9.9.480.1.1.2.1.2

crlResourceLimitValueType

This object represents the type of value specified
in crlResourceLimitMax and crlResourceLimitMin objects.
The possible values are :
absolute (1) : the value represents an absolute number.
percentage (2) : the va…

Enumerationr/w

Enumerated Values:

1	absolute
2	percentage

.1.3.6.1.4.1.9.9.480.1.1.2.1.3

crlResourceLimitMin

This object represents the rate limit allowed for
the resource identified by 'ciscoResourceLimitType'.
This value cannot be greater than the value
specified in ciscoResourceLimitMax.
The value zero signifies that this o…

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.480.1.1.2.1.4

crlResourceLimitMax

This object represents the limit allowed for
the resource identified by 'ciscoResourceLimitType'.
The value zero specifies that this resource
can be used until the system limit reached.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.480.1.1.2.1.5

crlResourceLimitStorageType

The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row.
This object cannot be modified when the value of
crlResourceLimitRow…

SNMPv2-TCStorageTyper/w

Textual Convention: SNMPv2-TCStorageType Enumeration

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

.1.3.6.1.4.1.9.9.480.1.1.2.1.6

crlResourceLimitRowStatus

This object is used for adding/deleting
entries in this table.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.9.9.480.1.1.2.1.7

crlResourceLimitCurrentUsage

This object indicates the number of resources identified by
'ciscoResourceLimitType', that are currently being used in
the system.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.480.1.1.2.1.8

crlResourceLimitPeakUsage

This object represents the peak usage of the resource
identified by 'ciscoResourceLimitType' since the statistics
were last cleared either through the command line interface or
bacause of the system reboot.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.480.1.1.2.1.9

crlResourceLimitReqsDeniedCount

This object represents the number of resource requests that
were denied when the configured resource limit is exceeded
for the resource identified by 'ciscoResourceLimitType'.

The value for resource limit…

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.480.1.1.2.1.10

ciscoL4L7ResourceRateLimitTable

table

.1.3.6.1.4.1.9.9.480.1.1.4 · 1 row entry · 8 columns

Open in standard view

This table is used for adding/deleting
the rate limiting of the resources in a
resource class.

ciscoL4L7ResourceRateLimitEntry entry .1.3.6.1.4.1.9.9.480.1.1.4.1

Information about an entry in the table
Each entry provides the name of group, the rate
configured for a resource.

Indexes

crlResourceClassName crlRateLimitResourceType

Column Syntax OID

crlRateLimitResourceType

This object represents the resource type
for which rate limiting needs to be done.
The value for rate limiting is specified
in crlRateLimitResourceMin and
crlRateLimitResourceMax.

CiscoRateLimitResourceType

Textual Convention: CiscoRateLimitResourceType Enumeration

Type Values:

1	all
2	arpRequestsXmt
3	arpResponses
4	bandwidth
5	connections
6	appInspections
7	syslog
8	sslBandwidth
9	sslConnections
10	mgmtBandwidth
11	throughput
12	missedMac
13	httpCompression

.1.3.6.1.4.1.9.9.480.1.1.4.1.1

crlRateLimitResourceMin

This object represents the rate limit allowed for
the resource identified by 'crlRateLimitResourceType'.
This value cannot be greater than the value
specified in crlRateLimitResourceMax.
The value zero signifies that th…

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.480.1.1.4.1.2

crlRateLimitResourceMax

This object represents the limit allowed for
the resource identified by 'crlRateLimitResourceType'.
The value zero specifies that this resource
can be used until the system limit reached.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.480.1.1.4.1.3

crlRateLimitResourceStorageType

The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row.
This object cannot be modified when the value of
crlRateLimitResourc…

SNMPv2-TCStorageTyper/w

Textual Convention: SNMPv2-TCStorageType Enumeration

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

.1.3.6.1.4.1.9.9.480.1.1.4.1.4

crlRateLimitResourceRowStatus

This object is used for adding/deleting
entries in this table. This object cannot
be set to 'active' until all the mandatory
objects have valid value.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.9.9.480.1.1.4.1.5

crlRateLimitResourceCurrentUsage

This object indicates the number of resources identified by
'crlRateLimitResourceType', that are currently being used in
the system.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.480.1.1.4.1.6

crlRateLimitResourcePeakUsage

This object represents the peak usage of the resource
identified by 'crlRateLimitResourceType' since the statistics
were last cleared either through the command line interface or
bacause of the system reboot.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.480.1.1.4.1.7

crlRateLimitResourceReqsDeniedCount

This object represents the number of resource requests that
were denied when the configured rate limit is exceeded
for the resource identified by 'crlRateLimitResourceType'.

The value for rate limiting is…

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.480.1.1.4.1.8

ciscoL4L7ResourceUsageSummaryTable

table

.1.3.6.1.4.1.9.9.480.1.1.5 · 1 row entry · 7 columns

Open in standard view

This table provides the statistics for each resource type
in a system.
The resource usage statistics can be: 
- current usage for the resource. 
- peak usage for the resource. 
- Number of times the resource request were denied when the
configured limit or rate-limit is exceeded for the resource.

ciscoL4L7ResourceUsageSummaryEntry entry .1.3.6.1.4.1.9.9.480.1.1.5.1

An entry in ciscoL4L7ResourceUsageSummaryTable. Each entry
provides the resource usage parameters in a system.

An entry is created when an entry is created in
either 'ciscoL4L7ResourceLimitTable' or
'ciscoL…

Indexes

crlResourceSummaryType

Column Syntax OID

crlResourceSummaryType

This object represents a type of resource in the system.

CiscoResourceType

Textual Convention: CiscoResourceType Enumeration

Type Values:

1	lMacAddresses
2	lConcurrentConns
3	lMgmtConnections
4	lProxyConns
5	lProbes
6	lStickyEntries
7	lNatTranslations
8	lRegexState
9	lAclMemory
10	lIpReassemBuffer
11	lSyslogBuffer
12	lTcpOOOBuffer
13	lSslConnections
14	lHosts
15	lIpsecSessions
16	lAsdmSessions
17	lSshSessions
18	lTelnetSessions
19	rlArpRequestsXmt
20	rlArpResponses
21	rlBandwidth
22	rlConnections
23	rlAppInspections
24	rlSyslog
25	rlSslBandwidth
26	rlSslConnections
27	rlMgmtBandwidth
28	rlThroughput
29	rlMissedMac
30	rlHttpCompression

.1.3.6.1.4.1.9.9.480.1.1.5.1.1

crlResourceSummaryCurrentUsage

This object indicates the current usage of the resource
in the system.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.480.1.1.5.1.2

crlResourceSummaryPeakUsage

This object represents the peak usage of the resource
in the system.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.480.1.1.5.1.3

crlResourceSummaryReqsDeniedCount

This object represents the number of resource requests
that were denied in the system when the configured
limit is exceeded for the resource.

The value for limiting is specified in 'crlResourceLimitMax'
a…

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.9.9.480.1.1.5.1.4

crlResourceSummaryLastClearedTime

This object represents the time when the value of the
object identified by 'crlResourceSummaryPeakUsage' is
last cleared or reset. A value of 0 (zero) signifies
that the value has not been cleared since the last
system …

SNMPv2-TCTimeStamp

Textual Convention: SNMPv2-TCTimeStamp Unsigned32

.1.3.6.1.4.1.9.9.480.1.1.5.1.5

crlResourceSummaryStorageType

The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row.
This object cannot be modified when the value of
'crlResourceSummary…

SNMPv2-TCStorageTyper/w

Textual Convention: SNMPv2-TCStorageType Enumeration

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

.1.3.6.1.4.1.9.9.480.1.1.5.1.6

crlResourceSummaryRowStatus

This object is used for adding/deleting
entries in this table. This object cannot
be set to 'active' until all the mandatory
objects have valid value.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.9.9.480.1.1.5.1.7

ciscoL4L7BufferUtilizationTable

table

.1.3.6.1.4.1.9.9.480.1.1.6 · 1 row entry · 7 columns

Open in standard view

This table provides the statistics for buffer utilization in
a system.
The buffer utilization statistics can be: 
- absolute  buffer usage value per network processor(NP). 
- percentage buffer usage per network processor(NP).

ciscoL4L7BufferUtilizationEntry entry .1.3.6.1.4.1.9.9.480.1.1.6.1

An entry in ciscoL4L7BufferUtilizationTable. Each entry
provides the buffer usage in a system.

Indexes

clrNetworkProcessor

Column	Syntax	OID
clrNetworkProcessor This object represents network processor number(NP) in the system.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.480.1.1.6.1.1`
crlBufferUsageValue This object indicates the absolute buffer usage in the system.	buffersSNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.480.1.1.6.1.2`
crlPercentageBufferUsage This object represents the percentage buffer usage in the the decimal format to allow historical information to be collected.	percentageCiscoBufferUtilPercentage Textual Convention: CiscoBufferUtilPercentage `Integer32` Type Constraints: `range: 0..10000`	`.1.3.6.1.4.1.9.9.480.1.1.6.1.3`
crlPercentageBufferUsageDisplay This object represents the percentage buffer usage in the string format to all interactive access to simple display format.	percentageSNMP-FRAMEWORK-MIBSnmpAdminString Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.9.9.480.1.1.6.1.4`
crlExternalBufferUsageValue This object indicates the absolute external buffer usage in the system.	buffersSNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.480.1.1.6.1.5`
crlExternalPercentageBufferUsage This object represents the percentage external buffer usage in the the decimal format to allow historical information to be collected.	percentageCiscoBufferUtilPercentage Textual Convention: CiscoBufferUtilPercentage `Integer32` Type Constraints: `range: 0..10000`	`.1.3.6.1.4.1.9.9.480.1.1.6.1.6`
crlExternalPercentageBufferUsageDisplay This object represents the percentage external buffer usage in the string format to all interactive access to simple display format.	percentageSNMP-FRAMEWORK-MIBSnmpAdminString Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.9.9.480.1.1.6.1.7`

ciscoL4L7NpCpuUtilTable

table

.1.3.6.1.4.1.9.9.480.1.1.7 · 1 row entry · 1 columns

Open in standard view

This table lists the CPU utilization statistics for each NP
(network processor) in the device.

ciscoL4L7NpCpuUtilEntry entry .1.3.6.1.4.1.9.9.480.1.1.7.1

Each row contains the average CPU utilization of all
sub-processors for a network processor identified by its
clrNetworkProcessor value.

Indexes

clrNetworkProcessor

Column	Syntax	OID
clrNpCpuUtilizationAverage This object indicates the average CPU utilization of all sub-processors belonged to a particular network processor at that instance.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.480.1.1.7.1.1`