CISCO-L2-DEV-MONITORING-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
6

cl2DevMonActiveTable

table
.1.3.6.1.4.1.9.9.271.1.1.3 · 1 row entry · 6 columns
Open in standard view 
The table for active devices on the network
being monitored by the hot standby monitoring 
unit. This table is on the hot standby 
monitoring unit. All entries on this table will 
only be added, deleted, modified using command
user interface or SNMP request.
cl2DevMonActiveEntry entry .1.3.6.1.4.1.9.9.271.1.1.3.1
An entry in the cl2DevMonActiveTable table.
Indexes
cl2DevMonActiveMacAddress
Column Syntax OID
cl2DevMonActiveMacAddress
Mac address of the active unit to be monitored by
this hot standby monitoring unit.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.9.9.271.1.1.3.1.1
cl2DevMonActivePollingFrequency
The frequency, in seconds, the active unit
specified by cl2DevMonActiveMacAddress is polled
for its health.
secondsUnsigned32r/w
Constraints:
range: 1-30
 .1.3.6.1.4.1.9.9.271.1.1.3.1.2
cl2DevMonActivePollingTimeOut
The total time, in seconds, the standby monitoring
unit can tolerate the failure of polling
of the active unit. After this duration, one
more failure of the polling will trigger this hot
standby monitoring unit to ta…
secondsUnsigned32r/w
Constraints:
range: 1-600
 .1.3.6.1.4.1.9.9.271.1.1.3.1.3
cl2DevMonActiveRowStatus
The status column used for creating, modifying, and
deleting instances of the columnar objects in the
cl2DevMonActiveTable table.

Creation of rows must be done via 'createAndGo' and
all columns are mand…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.9.271.1.1.3.1.4
cl2DevMonActiveRadioMacType
If the device being monitored is a IEEE 802.11
Wireless device, cl2DevMonActiveMacAddress
is the remote device radio MAC address and this
is the type of IEEE 802.11 Standard applies that
radio:
ieee802dot11a(1) -…
Enumerationr/w
Enumerated Values:
1ieee802dot11a
2ieee802dot11b
3ieee802dot11g
 .1.3.6.1.4.1.9.9.271.1.1.3.1.5
cl2DevMonActiveLocalRadioIndex
If the device being monitored is a IEEE 802.11
Wireless LAN device, this is the ifIndex of a
local radio of ifType ieee80211(71) used for the
monitoring.

If the local radio only supports to monitor only…
IF-MIBInterfaceIndexr/w
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.9.9.271.1.1.3.1.6