CISCO-ISDNU-IF-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
9

ciuIfStaticConfigTable

table
.1.3.6.1.4.1.9.9.18.1.1.1 · 1 row entry · 1 columns
Open in standard view 
The ISDN BRI integrated U interface Static Configuration
Table. It contains items that are statically 
configured by reading configuration from hardware and can 
not be changed by end user without physically changing the 
U Interface.
ciuIfStaticConfigEntry entry .1.3.6.1.4.1.9.9.18.1.1.1.1
An entry in the static configuration table for each
ISDN BRI integrated U interface.
Indexes
IF-MIBifIndex
Column Syntax OID
ciuIfType
Specifies the type of ISDN BRI integrated U interface.
other - none of the following.
addOnU - An add-On card with ISDN BRI integrated U
interface.
onBoardU - An on board ISDN BRI integrated U interface
onBo…
Enumeration
Enumerated Values:
1other
2addOnU
3onBoardU
4onBoardIntegUandSTPort
5addOnIntegUandSTPort
 .1.3.6.1.4.1.9.9.18.1.1.1.1.1

ciuIfStatusTable

table
.1.3.6.1.4.1.9.9.18.1.1.2 · 1 row entry · 6 columns
Open in standard view 
The ISDN BRI integrated U interface Status Table.  Contains 
information about the status of the ISDN U interface, 
including the error statistics and current active EOC 
(Embedded operations channel) commands from CO 
(Central office).
ciuIfStatusEntry entry .1.3.6.1.4.1.9.9.18.1.1.2.1
An entry in the status table for each ISDN BRI integrated U
interface.
Indexes
IF-MIBifIndex
Column Syntax OID
ciuIfStatus
This object contains the operation status of the ISDN
BRI integrated U interface.
activated - The ISDN U interface is activated.
The interface is active and data can be
transmitted and received…
Enumeration
Enumerated Values:
1activated
2activationPending
3deactivated
 .1.3.6.1.4.1.9.9.18.1.1.2.1.1
ciuIfEocCommand
The last EOC command sent by Central Office; the ECO command
supports operations communications needs between the network
and ISDN U interface.
OctetString
Constraints:
range: 1-48
 .1.3.6.1.4.1.9.9.18.1.1.2.1.2
ciuIfOverHeadBits
This object describes 5 attributes of Overhead bits. The
Overhead bits contains the ISDN U interface transceiver
operations and maintenance functions that are handled by M4,
M5 and M6 bits in the superframe. These bits…
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.9.9.18.1.1.2.1.3
ciuIfFebeErrors
Number of Far End Block Errors (FEBE) detected since
last boot. Whenever the CO (Central Office) receives a
block of data from the router with a CRC error, the FEBE
count is incremented by one.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.18.1.1.2.1.4
ciuIfNebeErrors
Number of Near End Block Errors (NEBE) detected since
last boot. Whenever the U transceiver receives a block of
data with a CRC error, the NEBE count is incremented by one.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.18.1.1.2.1.5
ciuIfLoopStatus
Current ISDN BRI integrated U interface Loop status and
NT maintenance mode. The definition of maintenance modes
are as follows:
none - The U interface is not in either Loopback or
maintenance mode.
type2Loopback…
Enumeration
Enumerated Values:
1none
2type2Loopback
3type3Loopback
4ntQuietMode
5ilmtMode
 .1.3.6.1.4.1.9.9.18.1.1.2.1.6

ciuIfExternalSTPortStatusTable

table
.1.3.6.1.4.1.9.9.18.1.2.1 · 1 row entry · 2 columns
Open in standard view 
The external S/T port status table. It contains the 
operation status of the external ISDN S/T ports.
ciuIfExternalSTPortStatusEntry entry .1.3.6.1.4.1.9.9.18.1.2.1.1
An entry in the status table for
each external ISDN S/T port.
Indexes
IF-MIBifIndex ciuIfExternalSTPortNumber
Column Syntax OID
ciuIfExternalSTPortNumber
The external ISDN S/T port number.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.9.9.18.1.2.1.1.1
ciuIfExternalSTPortStatus
This object contains the operation status of the external
ISDN S/T port.
activated - The external ISDN S/T port is activated.
The port is active and data can be transmitted
and receiv…
Enumeration
Enumerated Values:
1activated
2activationPending
3deactivated
 .1.3.6.1.4.1.9.9.18.1.2.1.1.2