CISCO-ISCSI-GW-MIB Table View

This table lists the configuration of automatic 
importing and exporting of targets into and from iSCSI 
domain. If a targets is discovered in other domains, it 
is automatically imported if it is configured for 
automatic importing. Similarly, if an iSCSI target is
discovered, it is automatically exported to other domains
if it is configured to do so.

This table lists all the nodes in the iSCSI domain 
which are currently represented in the FC domain.  
          
Entries in this table are automatically created when
an iSCSI initiator logs (starts a session) into a target
or an iSCSI target is discovered. Entries are also 
created when targets are exported from the iSCSI domain 
into FC.  
          
Entries in this table are automatically removed when an
iSCSI initiator logs out of all targets or an iSCSI 
target disappears.
          
Entries also can be created and deleted  using the 
iscsi2FcNodeRowStatus object.
If the entry created in this table exposes either iSCSI
initiator or iSCSI target or both from the local device,
then a entry has to be created implicitly by the agent 
in the cIscsiNodeAttributesTable when an entry is 
created in this table.
          
A row in this table can not be made 'active' until values
are explicitly provided for that row's instances of 
iscsi2FcNodeName and iscsi2FcNodeRole.
          
The following objects cannot be modified when the 
iscsi2FcNodeRowStatus is 'active' :
   iscsi2FcNodeName
   iscsi2FcNodeRole
          
To modify the above objects, the entry must be deleted 
and re-created with new values of above objects.
          
Every node in this table is associated with a iSCSI 
instance which is uniquely identified by 
cIscsiInstIndex.

This table lists all the FC nodes which the gateway 
presents as iSCSI nodes to the iSCSI domain. 
          
Entries in this table are automatically created when
FC nodes are discovered.
          
Entries in this table are automatically removed when 
FC nodes go offline.
          
Entries also can be created/deleted using the 
fc2IscsiNodeRowStatus object. An entry can be created by
to configure a node statically instead of allowing it to
be discovered.
          
A row in this table can not be made 'active' until values
are explicitly provided for that row's instances of 
fc2IscsiNodeName and fc2IscsiNodeRole.
          
The following objects cannot be modified when the 
fc2IscsiNodeRowStatus is 'active' :
- fc2IscsiNodeRole    
- fc2IscsiNodeName
          
To modify the above objects, the entry must be deleted 
and re-created with new values of above objects.
          
To create an iSCSI target from whole a FC target, use 
fc2ScsiPortFCAddrListIndex.
To create an iSCSI target from Logical Units on the 
FC targets, create an entry in this table. And
then create an entry (s) in the scsiLuExtTable using
fc2IscsiNodeName of an entry in this table as 
scsiLuExtLocalTargetAddress value.

This table contains the list of FC addresses.
Entries in this table are automatically created/deleted
when the FC addresses are automatically 
assigned/released to/from the entities which are using
this table to create FC address lists.
          
Entries in this table are also created/deleted using 
fcAddressRowStatus.
          
A row in this table can not be made 'active' until a 
value is explicitly provided for that row's instances 
of fcAddress.
          
Also, the following object cannot be modified when 
'fcAddressRowStatus' is 'active' :
- fcAddress
          
To modify the above object, the entry must be deleted and
re-created with new value of above object.

This table contains the list of iSCSI node names.
          
A row in this table can not be made 'active' until a 
value is explicitly provided for that row's instances 
of iscsiNodeName.
          
Also, the following objects cannot be modified when 
'iscsiNodeNameRowStatus' is 'active' :
- iscsiNodeName
          
To modify the above object, the entry must be deleted and
re-created with new value of above object.

This table contains the list of advertised 
interface list.
          
A FC node represented in the iSCSI domain as an iSCSI
node is advertised only on the interfaces which are 
allowed advertised interface list of the iSCSI node.
          
A row in this table can not be made 'active' until a 
value is explicitly provided for that row's instances 
of nodeAdvIntfIfIndex.
          
Also, the following object cannot be modified when 
'nodeAdvIntfIfRowStatus' is 'active' :
- nodeAdvIntfIfIndex
          
To modify the above object, the entry must be deleted and
re-created with new value of above object.

An extension of the scsiLuTable to support creation of
iSCSI virtual targets from LUs on remote FC targets.
          
To create iSCSI virtual targets from a set of LUs on FC 
targets, entries needs to be created in this table. The 
iSCSI targets can be created in different ways. For 
example:
- multiple iSCSI targets can be created from either one
  LU or a subset of LUs from a single FC target device. 
- a single iSCSI target can be created from LUs of 
  multiple FC target devices.      
          
Note that a gateway implementation may choose to support 
only a subset of these features.
            
To create a virtual iSCSI target from LUs on the remote 
FC targets,  create an entry (s) in this table with 
local LUs to map to remote LUs and 
value of scsiLuExtLocalTargetAddress to same as the
iSCSI node name of the virtual iSCSI node being created.
          
A row in this table can not be made 'active' until a 
value is explicitly provided for that row's instances 
of following objects :
- scsiLuExtRemotePortFcAddress
- scsiLuExtLocalTargetAddress
- scsiLuExtLocalLun
- scsiLuExtRemoteLun
          
Also, the following objects cannot be modified when 
'scsiLuExtRowStatus 'active' :
- scsiLuExtRemotePortFcAddress
- scsiLuExtLocalTargetAddress
- scsiLuExtLocalLun
- scsiLuExtRemoteLun
          
To modify the above objects, the entry must be deleted 
and re-created with new values of above objects.

List of iSCSI interfaces.

This table contains Gigabit Ethernet (GigE) interfaces.
It contains iSCSI-specific configuration objects for the 
GigE interface.

This table contains objects which provide more 
information about iSCSI sessions which are not in 
cIscsiSessionAttributesTable.

This table contains objects which provide 
iSCSI connection statistics.