CISCO-IF-LINK-CONFIG-MIB

        The MIB module for configuration of bulk distribution
(de-multiplexing of traffic from higher-bandwidth to 
lower-bandwidth interfaces).
        
Terminology :
        
bulk-distribution        : The bulk distribution is the 
                           feature by which a line/interface
                           on one module can replace the line
                           for the other.
        
bulk-distribution module : The module which links its 
                           interfaces to the target module.
        
target module            : A module that gets incoming traffic
                           from a bulk distribution module 
                           rather than from a back card.
                     
The Module which supports bulk distribution, converts 
traffic from its lines (may be T3, OC-N) to lines on 
the target module (may be
T3, T1 etc). The bulk distribution is achieved by having a 
point-to-point connection (bulk-distribution bus) between the 
bulk-distribution module and the target module. The benefit 
of bulk distribution is that the target module need not have
the back cards. The lines/interfaces from bulk-distribution
module will be used as lines for the target module.
        
An example is given here on linking interfaces.
        
        
   |------------------------------------------------|
   |                                                |
   |             |------------------------------|   |
   |             |           |             |    |   |
   |             |           |-------------|    |   |
 Ta|rget Module  |           |             |    |   |
-------       -------     -------     ---------------
|     |       |     |     |     |     |              |
|     |       |     |     |     |     |              |
|  T1 |       | T1  |     |T1   |     | Bulk         |
|card |       |card |     |card |     | Distribution |
|     |       |     |     |     |     |              |
|     |       |     |     |     |     | Module       |
|     |       |     |     |     |     |              |
|     |       |     |     |     |     | (T3 card)    |
|     |       |     |     |     |     |              |
-------       -------     -------      ---------------
    
Last revised
Identity
ciscoIfLinkConfigMIB
Base OID
1.3.6.1.4.1.9.9.175
Imported Objects
CISCO-SMI ciscoMgmt
CISCO-TC CiscoLocationSpecifier
IF-MIB InterfaceIndex
SNMPv2-CONF MODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMI MODULE-IDENTITY OBJECT-TYPE
SNMPv2-TC RowStatus
Objects (12)
.1.3.6.1.4.1.9.9.175
.1.3.6.1.4.1.9.9.175.1
.1.3.6.1.4.1.9.9.175.1.1
.1.3.6.1.4.1.9.9.175.1.1.1
cilSourceInterface
.1.3.6.1.4.1.9.9.175.1.1.1.1
IF-MIBInterfaceIndex
.1.3.6.1.4.1.9.9.175.1.1.1.1.1
CISCO-TCCiscoLocationSpecifier
.1.3.6.1.4.1.9.9.175.1.1.1.1.2
SNMPv2-TCRowStatus
.1.3.6.1.4.1.9.9.175.1.1.1.1.3
Enumeration
.1.3.6.1.4.1.9.9.175.1.1.1.1.4
.1.3.6.1.4.1.9.9.175.3
.1.3.6.1.4.1.9.9.175.3.1
.1.3.6.1.4.1.9.9.175.3.2