CISCO-IETF-VPLS-BGP-EXT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
13

ciVplsBgpExtConfigTable

table
.1.3.6.1.4.1.9.10.140.1.1 · 1 row entry · 2 columns
Open in standard view 
This table specifies information for configuring
and monitoring BGP-specific parameters for VPLS.
          
A row is automatically created when a VPLS is
configured using BGP signalling.
          
None of the read-write objects values can be
changed when cvplsConfigRowStatus is in the active(1)
state. Changes are allowed when the cvplsConfigRowStatus
is in notInService(2) or notReady(3) states only.
If the operator need to change one of the values
for an active row the cvplsConfigRowStatus should be
first changed to notInService(2), the objects may
be changed now, and later to active(1) in order to
re-initiate the signaling process with the new
values in effect.
ciVplsBgpExtConfigEntry entry .1.3.6.1.4.1.9.10.140.1.1.1
Each Entry represents a conceptual row in ciVplsBgpExtConfigTable
and provides the information about BGP-specific information
for VPLS in a packet network.
Indexes
Column Syntax OID
ciVplsBgpExtConfigRouteDistinguisher
This object represents the Route Distingiusher for this VPLS.
CiVplsBgpExtRouteDistinguisherr/w
Textual Convention: CiVplsBgpExtRouteDistinguisher OctetString
Type Constraints:
range: 0..256
 .1.3.6.1.4.1.9.10.140.1.1.1.1
ciVplsBgpExtConfigVERangeSize
This object represents the size of the range of VE identifiers in this VPLS.
This number controls the size of the label block advertised for this
VE by the PE.
A value of 0 indicates that the range is not configured an…
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.10.140.1.1.1.4

civplsBgpExtRTTable

table
.1.3.6.1.4.1.9.10.140.1.2 · 1 row entry · 4 columns
Open in standard view 
This table specifies information for the list of RTs imported or 
exported by BGP during auto-discovery of VPLS.
civplsBgpExtRTEntry entry .1.3.6.1.4.1.9.10.140.1.2.1
Each Entry represents a conceptual row in civplsBgpExtRTTable
and provides the information about the value of the RT being used by BGP.
Depending on the value of civplsBgpExtRTType, an RT might be exported or
imported …
Indexes
CISCO-IETF-VPLS-GENERIC-MIBcvplsConfigIndex ciVplsBgpExtRTType ciVplsBgpExtRT
Column Syntax OID
ciVplsBgpExtRTType
This object represents the type of a RT usage. RTs can be specified
to be imported, exported, or both.
CiVplsBgpExtRouteTargetTyper/w
Textual Convention: CiVplsBgpExtRouteTargetType Enumeration
Type Values:
1import
2export
3both
 .1.3.6.1.4.1.9.10.140.1.2.1.1
ciVplsBgpExtRT
The RT associated with the VPLS service.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.9.10.140.1.2.1.2
ciVplsBgpExtRTStorageType
This object indicates the storage type for this row.
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
 .1.3.6.1.4.1.9.10.140.1.2.1.3
ciVplsBgpExtRTRowStatus
This object is used to create, modify, and/or
delete a row in this table. When a row in this
table is in active(1) state, no objects in that row
can be modified.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.10.140.1.2.1.4

ciVplsBgpExtVETable

table
.1.3.6.1.4.1.9.10.140.1.3 · 1 row entry · 5 columns
Open in standard view 
This table associates VPLS Edge devices to a VPLS.
The VEs assigned to a VPLS can be configured on a PE.
This table has an expansion dependant relationship 
with cvplsConfigTable. For each row identified by 
cvplsConfigIndex, there may exist one or more rows 
in this table. ciVplsBgpExtVEId is the expansion index. 
          
None of the read-create objects values can be
changed when ciVplsBgpExtVERowStatus is in the active(1)
state. Changes are allowed when the ciVplsBgpExtVERowStatus
is in notInService(2) or notReady(3) states only.
If the operator need to change one of the values
for an active row the ciVplsBgpExtVERowStatus should be
first changed to notInService(2), the objects may
be changed now, and later to active(1) in order to
re-initiate the signaling process with the new
values in effect.
ciVplsBgpExtVEEntry entry .1.3.6.1.4.1.9.10.140.1.3.1
Each Entry represents a conceptual row in ciVplsBgpExtVETable
and provides the information about VPLS Edge devices.
Indexes
CISCO-IETF-VPLS-GENERIC-MIBcvplsConfigIndex ciVplsBgpExtVEId
Column Syntax OID
ciVplsBgpExtVEId
This object identifies a VE associated with a VPLS.
CiVplsBgpExtVEID
Textual Convention: CiVplsBgpExtVEID Unsigned32
 .1.3.6.1.4.1.9.10.140.1.3.1.1
ciVplsBgpExtVEName
This object represents the name of the site or u-PE associated with this VE.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.10.140.1.3.1.2
ciVplsBgpExtVEPreference
This object represents the preference of the VE if the site is multi-homed and VE Id is used.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.10.140.1.3.1.3
ciVplsBgpExtVEStorageType
This object indicates the storage type for this row.
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
 .1.3.6.1.4.1.9.10.140.1.3.1.5
ciVplsBgpExtVERowStatus
This object is used to create, modify, and/or
delete a row in this table. When a row in this
table is in active(1) state, no objects in that row
can be modified.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.10.140.1.3.1.6

ciVplsBgpExtPwBindTable

table
.1.3.6.1.4.1.9.10.140.1.4 · 1 row entry · 2 columns
Open in standard view 
This table provides BGP-specific information for
an association between a VPLS and the 
corresponding Pseudo Wires. A service can have more
than one Pseudo Wire association. Pseudo Wires are
defined in the cpwvcTable.
          
Each row represents an association between a VPLS instance 
and one or more Pseudo Wires defined in the cpwVcTable in 
CISCO-IETF-PW-MIB. 
          
An Entry in this table in instantiated only when
BGP signalling is used to configure VPLS.
ciVplsBgpExtPwBindEntry entry .1.3.6.1.4.1.9.10.140.1.4.1
Each Entry represents a conceptual row in ciVplsBgpExtPwBindTable
and provides the information about BGP-specific information for
an association between a VPLS and the
corresponding Pseudo Wires.
Indexes
Column Syntax OID
ciVplsBgpExtPwBindLocalVEId
This object represents the local VE this Pseudo Wire is associated with.
CiVplsBgpExtVEID
Textual Convention: CiVplsBgpExtVEID Unsigned32
 .1.3.6.1.4.1.9.10.140.1.4.1.1
ciVplsBgpExtPwBindRemoteVEId
This object represents the remote VE this Pseudo Wire is associated with.
CiVplsBgpExtVEID
Textual Convention: CiVplsBgpExtVEID Unsigned32
 .1.3.6.1.4.1.9.10.140.1.4.1.2