CISCO-IETF-MEGACO-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
7
Rows
7
Columns
43

cmedLinkIdTable

table
.1.3.6.1.4.1.9.10.99999.1.1.1 · 1 row entry · 1 columns
Open in standard view 
This table contains a nextLinkId for each Gateway. 
It provides the manager with the nextLinkId for use 
in creating new Gateway Table Entries.
cmedLinkIdEntry entry .1.3.6.1.4.1.9.10.99999.1.1.1.1
This table contains the NextLinkId for this Gateway
and is indexed by mediaGatewayId.
Indexes
cmedGatewayId
Column Syntax OID
cmedNextLinkId
The Next Value for a cmedGatewayLinkId. Assists the
manager in selecting a value for cmedGatewayLinkId.
Using the TestAndIncr syntax, A Manager will 'lock' this
variable, ensuring single access.
SNMPv2-TCTestAndIncrr/w
Textual Convention: SNMPv2-TCTestAndIncr Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.10.99999.1.1.1.1.1

cmedGatewayConfigTable

table
.1.3.6.1.4.1.9.10.99999.1.1.2 · 1 row entry · 13 columns
Open in standard view 
A list of cmedGatewayConfigEntry objects.
cmedGatewayConfigEntry entry .1.3.6.1.4.1.9.10.99999.1.1.2.1
Entry holding configuration information about a
group of Media Gateway Controllers sharing the same
signaling link.
Indexes
cmedGatewayId cmedGatewayLinkId
Column Syntax OID
cmedGatewayId
The unique Media Gateway Id which identifies this
media gateway
CMediaGatewayId
Textual Convention: CMediaGatewayId Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.9.10.99999.1.1.2.1.1
cmedGatewayLinkId
The unique link id which identifies the signaling
link that this gateway uses to communicate with the
Gateway Controllers to form an H.248 association.
CMediaGatewayLinkId
Textual Convention: CMediaGatewayLinkId Unsigned32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.9.10.99999.1.1.2.1.2
cmedGatewayLinkName
A descriptive name of this signaling link / media
gateway combination
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.10.99999.1.1.2.1.3
cmedGatewayIPAddress
The IP address that the Media Gateway Controller
will use to communicate with the Media Gateway.
This object reflects the IP address over control
PVC that user configures in cMediaGwIpConfigTable.

The v…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.9.10.99999.1.1.2.1.4
cmedGatewayPort
TCP/UDP port number that the Media Gateway Controller will
use to communicate with the Media Gateway. The value
0 is returned if the entry is invalid.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.10.99999.1.1.2.1.5
cmedGatewayEncodingScheme
The encoding scheme that would be used to encode the H.248
messages that are sent/received to/from the gateway
controller
Enumerationr/w
Enumerated Values:
1text
2binary
 .1.3.6.1.4.1.9.10.99999.1.1.2.1.6
cmedGatewayProtocol
Type of the control protocol in use
notApplicable (1) -
other (2) - Other (none from the list below)
dss1-ip (3) - Q931+
ipdc (4) - IPDC
megacov1 (5) - MEGACO/H.248 Version 1
megacov2 …
Enumerationr/w
Enumerated Values:
1notApplicable
2other
3dss1Ip
4ipdc
5megacov1
6megacov2
7mgcp
 .1.3.6.1.4.1.9.10.99999.1.1.2.1.7
cmedGatewaySigTptProtocol
Type of the transport protocol that is being used to
transport the H.248 signaling traffic
Enumerationr/w
Enumerated Values:
1tcp
2udp
3sctp
4other
 .1.3.6.1.4.1.9.10.99999.1.1.2.1.8
cmedGatewayAdminStatus
The desired state of the gateway.
The testing(3) state indicates that no signaling
packets can be passed.
When a managed system initializes, all gateways start
with cmedGatewayAdminStatus in the down(2) state.
A…
Enumerationr/w
Enumerated Values:
1up
2down
3testing
 .1.3.6.1.4.1.9.10.99999.1.1.2.1.9
cmedGatewayOperStatus
The current operational state of the gateway.
up (1) - ready to communicate with MGC
down (2)
testing(3) - in some test mode
unknown(4) - status can not be determined for some
reason.
The testi…
Enumeration
Enumerated Values:
1up
2down
3testing
4unknown
 .1.3.6.1.4.1.9.10.99999.1.1.2.1.10
cmedGatewayLastStatusChange
The value of sysUpTime at the time the associated
link entered its current operational status. If
the current status was entered prior to the last
re-initialization of the local network management
subsystem, then th…
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.9.10.99999.1.1.2.1.11
cmedGatewayResetStatistics
This object can be used to reset all statistics
collected for this media gateway link so far.
Statistics will be reset when the object is SET
to 'reset'. Upon reset, the agent changes the value
of this object to 'notAp…
Enumerationr/w
Enumerated Values:
1notApplicable
2other
3reset
 .1.3.6.1.4.1.9.10.99999.1.1.2.1.12
cmedGatewayRowStatus
This is used to create new rows, modify existing rows
and to delete existing rows.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.10.99999.1.1.2.1.13

cmedGwyControllerTable

table
.1.3.6.1.4.1.9.10.99999.1.1.3 · 1 row entry · 5 columns
Open in standard view 
List of the Media Gateway Controllers that are managed 
in the network
cmedGwyControllerEntry entry .1.3.6.1.4.1.9.10.99999.1.1.3.1
Entry holding information about an individual
Media Gateway Controller.
Indexes
cmedGatewayId cmedGatewayLinkId cmedGwyControllerId
Column Syntax OID
cmedGwyControllerId
An unique identification number that is assigned to
the gateway controller by the manager
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.9.10.99999.1.1.3.1.1
cmedGwyControllerIPAddress
The IP address of the Media Gateway Controller. The
value 0.0.0.0 is returned if the entry is invalid.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.9.10.99999.1.1.3.1.2
cmedGwyControllerPort
TCP port of the Media Gateway Controller. The value
0 is returned if the entry is invalid.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.10.99999.1.1.3.1.3
cmedGwyControllerAdminStatus
The desired state of the gateway.
The testing(3) state indicates that no signaling
packets can be passed.
When a managed system initializes, all gateways start
with cmedGwyControllerAdminStatus in the down(2)
stat…
Enumerationr/w
Enumerated Values:
1up
2down
3testing
 .1.3.6.1.4.1.9.10.99999.1.1.3.1.4
cmedGwyControllerOperStatus
The current operational state of the gateway controller.
The standby(3) state indicates that it is in the standby
mode and no signaling packets can be passed. If
cmedGwyControllerAdminStatus is down(2) then
cmed…
Enumeration
Enumerated Values:
1up
2down
3standby
 .1.3.6.1.4.1.9.10.99999.1.1.3.1.5

cmedGatewayStatsTable

table
.1.3.6.1.4.1.9.10.99999.1.2.1 · 1 row entry · 12 columns
Open in standard view 
A list of mediaGatewayTableEntry objects.
cmedGatewayStatsEntry entry .1.3.6.1.4.1.9.10.99999.1.2.1.1
Entry holding statistics about a group of
media Gateway/signaling link pair
Indexes
cmedGatewayId cmedGatewayLinkId
Column Syntax OID
cmedNumInMessages
Total number of messages received on the link.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.99999.1.2.1.1.1
cmedNumInOctets
Total number of octets received on the link.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.99999.1.2.1.1.2
cmedNumOutMessages
Total number of messages sent on the link.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.99999.1.2.1.1.3
cmedNumOutOctets
Total number of octets sent on the link.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.99999.1.2.1.1.4
cmedNumErrors
Total number of signaling-level errors encountered.
Includes, but is not limited to, number of bad
messages received, number of failures to sent a
message and number of other errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.99999.1.2.1.1.5
cmedNumTimerRecovery
Total Number of timer recovery events since the
statistics was last reset. This reflects all protocol
timers that are supported (For H.248, T - start timer,
S - short timer, L - long timer, and Z - long duration
t…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.99999.1.2.1.1.6
cmedTransportNumLosses
Number of times a transport link was lost
(excluding switch-over cases). A link loss is defined
as loss of communication with the entity (MGC) due to
hardware/transient problems in the interface or other
related har…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.99999.1.2.1.1.7
cmedTransportNumSwitchover
Number of times when the signaling was switched
over to an alternative link. This includes
switchover due to the Handoffs initiated by the
gateway controllers
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.99999.1.2.1.1.8
cmedTransportTotalNumAlarms
Total number of all alarms issued for the transport
layer.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.99999.1.2.1.1.9
cmedTransportLastEvent
Last event reported by the transport layer.
notApplicable (1) - Invalid/unknown.
other (2) - None from the list below.
linkUp (3) - Transport link is up.
linkLoss (4) - Transport link los…
Enumeration
Enumerated Values:
1notApplicable
2other
3linkUp
4linkLoss
5persistentError
6linkShutdown
7switchOver
 .1.3.6.1.4.1.9.10.99999.1.2.1.1.10
cmedTransportLastEventTime
The value of sysUpTime at the time when the event
specified by cmedTransportLastEvent occurred.
If the last event occurred prior to the last
re-initialization of the local network management
subsystem, then this obj…
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.9.10.99999.1.2.1.1.11
cmedLastStatisticsReset
The value of sysUpTime at the time when the
statistics were reset. If the reset occurred prior to
the last re-initialization of the local network
management subsystem, this object contains a zero
value.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.9.10.99999.1.2.1.1.12

cmedTermIdTable

table
.1.3.6.1.4.1.9.10.99999.1.3.1 · 1 row entry · 1 columns
Open in standard view 
This table contains a nextTerminationId for each 
Gateway. It provides the manager with the 
nextTerminationId for use in creating a new 
TerminationsTable Entry.
cmedTermIdEntry entry .1.3.6.1.4.1.9.10.99999.1.3.1.1
This table contains a nextTerminationId for each
Gateway, and is indexed by mediaGatewayId.
Indexes
cmedGatewayId
Column Syntax OID
cmedNextTerminationId
The Next Value for a MediaGateway TerminationId.
Assists the manager in selecting a value for
cmedTermId.
Using the TestAndIncr syntax, A Manager will 'lock' this
variable, ensuring single access.
SNMPv2-TCTestAndIncrr/w
Textual Convention: SNMPv2-TCTestAndIncr Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.10.99999.1.3.1.1.1

cmedTerminationsTable

table
.1.3.6.1.4.1.9.10.99999.1.3.2 · 1 row entry · 7 columns
Open in standard view 
This table contains information about terminations 
in a media gateway. It is a list of terminations. 
The number of entries equals to the total number of 
terminations for all contexts in a gateway.
cmedTerminationsEntry entry .1.3.6.1.4.1.9.10.99999.1.3.2.1
It contains objects that describe a termination.
Indexes
cmedGatewayId cmedTermId
Column Syntax OID
cmedTermId
An unique identification number that is assigned to
the termination by a media gateway. This is the
TerminationId that would be used in the protocol
messages that are sent from the gateway
CMediaGatewayTermId
Textual Convention: CMediaGatewayTermId Unsigned32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.9.10.99999.1.3.2.1.1
cmedTermName
A descriptive name that would describe this termination
and its use. For example, 'emergency-ds0-1' indicating
that this termination is reserved as an emergency DS0
channel
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.9.10.99999.1.3.2.1.2
cmedTermAdminStatus
The desired state of the termination.
The testing(3) state indicates that no connections
can be created for this termination.
When a managed system initializes, all terminations
start with cmedTermAdminStatus in th…
Enumerationr/w
Enumerated Values:
1inService
2outOfService
3testing
 .1.3.6.1.4.1.9.10.99999.1.3.2.1.3
cmedTermOperStatus
The current operational state of the termination.
The testing(3) state indicates that it is in the
testing mode and no connections can be created on it.
If cmedTermAdminStatus is outOfService(2)
then cmedTermOperSta…
Enumeration
Enumerated Values:
1up
2down
3testing
 .1.3.6.1.4.1.9.10.99999.1.3.2.1.4
cmedTermInterfaceIdentifier
A number that uniquely identifies the interface in
the physical gateway. This is the ifIndex in the ifTable,
that this termination would be using to communicate to
other gateways
IF-MIBInterfaceIndexr/w
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.9.10.99999.1.3.2.1.5
cmedTermPropertyProfileId
This determines the profile of the termination which
determines what kind of capabilities this termination has.
This is an index into the cmedPropertyProfileTable
which identifies all the profile that are available
Unsigned32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.9.10.99999.1.3.2.1.6
cmedTermRowStatus
This is used to create new rows in this table,
Modify existing rows, and to delete existing rows.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.10.99999.1.3.2.1.7

cmedPropertyProfileTable

table
.1.3.6.1.4.1.9.10.99999.1.3.3 · 1 row entry · 4 columns
Open in standard view 
This table contains a list of the properties 
supported in a Profile.  A Manager builds a Profile 
of properties, then ties each termination to a 
defined profile
cmedPropertyProfileEntry entry .1.3.6.1.4.1.9.10.99999.1.3.3.1
Each row represents a default property of the
Property Profile N-entries per
mediaGatewayId/PropertyId, one entry per property.
Indexes
cmedGatewayId cmedPropertyProfileId cmedPropertyProfileIndex
Column Syntax OID
cmedPropertyProfileId
This PropertyProfile Identifier uniquely identifies
this set of properties.
This is the value each termination would refer,
when they would like to support all the properties
in this profile
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.9.10.99999.1.3.3.1.1
cmedPropertyProfileIndex
This is the index to the PropertyProfile This is just
a 'counter' through the cmedPropertyProfile Table.
ie, property=1 property=2 etc.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.9.10.99999.1.3.3.1.2
cmedPropertyProfileProperty
The Property supported by this Profile.
This is an Object ID (OID) defined in a package MIB
to identify a Particular property (such as AnalogLines,
Tones etc).
SNMPv2-TCAutonomousTyper/w
Textual Convention: SNMPv2-TCAutonomousType ObjectIdentifier
 .1.3.6.1.4.1.9.10.99999.1.3.3.1.3
cmedPropertyProfileRowStatus
It is used to create new rows in this table, modify
existing rows, and to delete existing rows.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.10.99999.1.3.3.1.4