CISCO-IETF-FRR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
28

cmplsFrrConstTable

table
.1.3.6.1.4.1.9.10.98.2.1.1 · 1 row entry · 13 columns
Open in standard view 
This table shows detour setup constraints.
cmplsFrrConstEntry entry .1.3.6.1.4.1.9.10.98.2.1.1.1
An entry in this table represents detour LSP or bypass tunnel
setup constraints for a tunnel instance to be protected by
detour LSPs or a tunnel. Agents must allow entries in this table
to be created only for tunnel …
Indexes
cmplsFrrConstIfIndex cmplsFrrConstTunnelIndex cmplsFrrConstTunnelInstance
Column Syntax OID
cmplsFrrConstIfIndex
Uniquely identifies an interface for which fast reroute is
configured. Tabular entries indexed with a 0 value apply to all
interfaces on this device for which the FRR feature can operate
on.
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.10.98.2.1.1.1.1
cmplsFrrConstTunnelIndex
Uniquely identifies a tunnel for which fast reroute is
requested.
MPLS-TC-STD-MIBMplsTunnelIndex
Textual Convention: MPLS-TC-STD-MIBMplsTunnelIndex Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.10.98.2.1.1.1.2
cmplsFrrConstTunnelInstance
Uniquely identifies an instance of this tunnel for which fast
reroute is requested.
MPLS-TC-STD-MIBMplsTunnelInstanceIndex
Textual Convention: MPLS-TC-STD-MIBMplsTunnelInstanceIndex Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.98.2.1.1.1.3
cmplsFrrConstSetupPrio
Indicates the setup priority of detour LSP.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.9.10.98.2.1.1.1.4
cmplsFrrConstHoldingPrio
Indicates the holding priority for detour LSP.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.9.10.98.2.1.1.1.5
cmplsFrrConstInclAnyAffinity
A link satisfies the include-any constraint if and only if the
constraint is zero, or the link and the constraint have a
resource class in common.
MPLS-TC-STD-MIBMplsTunnelAffinityr/w
Textual Convention: MPLS-TC-STD-MIBMplsTunnelAffinity Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.98.2.1.1.1.6
cmplsFrrConstInclAllAffinity
A link satisfies the include-all constraint if and only if the
link contains all of the administrative groups specified in the
constraint.
MPLS-TC-STD-MIBMplsTunnelAffinityr/w
Textual Convention: MPLS-TC-STD-MIBMplsTunnelAffinity Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.98.2.1.1.1.7
cmplsFrrConstExclAllAffinity
A link satisfies the exclude-all constraint if and only if the
link contains none of the administrative groups specified in the
constraint.
MPLS-TC-STD-MIBMplsTunnelAffinityr/w
Textual Convention: MPLS-TC-STD-MIBMplsTunnelAffinity Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.98.2.1.1.1.8
cmplsFrrConstHopLimit
The maximum number of hops that the detour LSP may traverse.
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.9.10.98.2.1.1.1.9
cmplsFrrConstBandwidth
This variable represents the bandwidth for detour LSPs of this
tunnel, in units of thousands of bits per second (Kbps).
MPLS-TC-STD-MIBMplsBitRater/w
Textual Convention: MPLS-TC-STD-MIBMplsBitRate Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.98.2.1.1.1.10
cmplsFrrConstRowStatus
This object is used to create, modify, and/or delete a row in
this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.10.98.2.1.1.1.11
cmplsFrrConstNumProtectingTunOnIf
The number of backup tunnels protecting the specified
interface.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.98.2.1.1.1.12
cmplsFrrConstNumProtectedTunOnIf
The number of tunnels protected on this interface.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.98.2.1.1.1.13

cmplsFrrLogTable

table
.1.3.6.1.4.1.9.10.98.2.1.2 · 1 row entry · 6 columns
Open in standard view 
The fast reroute log table records fast reroute events such
as protected links going up or down or the FRR feature
kicking in.
cmplsFrrLogEntry entry .1.3.6.1.4.1.9.10.98.2.1.2.1
An entry in this table is created to describe one fast
reroute event. Entries in this table are only created and
destroyed by the agent implementation. The maximum number
of entries in this log is governed by the scal…
Indexes
cmplsFrrLogIndex
Column Syntax OID
cmplsFrrLogIndex
Uniquely identifies a fast reroute event entry.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.98.2.1.2.1.1
cmplsFrrLogEventTime
This object provides the amount of time ticks since this
event occured.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.9.10.98.2.1.2.1.2
cmplsFrrLogInterface
This object indicates which interface was affected by this
FRR event. This value may be set to 0 if
mplsFrrConstProtectionMethod is set to oneToOneBackup(0).
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.10.98.2.1.2.1.3
cmplsFrrLogEventType
This object describes what type of fast reroute event
occured.
Enumeration
Enumerated Values:
1other
2protected
 .1.3.6.1.4.1.9.10.98.2.1.2.1.4
cmplsFrrLogEventDuration
This object describes the duration of this event.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.98.2.1.2.1.5
cmplsFrrLogEventReasonString
This object contains an implementation-specific explanation
of the event.
OctetString
Constraints:
range: 128-128
 .1.3.6.1.4.1.9.10.98.2.1.2.1.6

cmplsFrrFacRouteDBTable

table
.1.3.6.1.4.1.9.10.98.2.3.1 · 1 row entry · 9 columns
Open in standard view 
The mplsFrrFacRouteDBTable provides information about the 
fast reroute database.  Each entry belongs to an interface,
protecting backup tunnel and protected tunnel. MPLS 
interfaces defined on this node are protected by backup
tunnels and are indexed by mplsFrrFacRouteProtectedIndex.
Backup tunnels defined to protect the tunnels traversing an
interface, and are indexed by 
mplsFrrFacRouteProtectingTunIndex.  Note that the tunnel 
instance index is not required, since it is implied to be 0, 
which indicates the tunnel head interface for the protecting 
tunnel. The protecting tunnel is defined to exist on the PLR 
in the FRR specification.  Protected tunnels are the LSPs that 
traverse the protected link.  These LSPs are uniquely 
identified by mplsFrrFacRouteProtectedTunIndex,
mplsFrrFacRouteProtectedTunInstance, 
mplsFrrFacRouteProtectedTunIngressLSRId, and 
mplsFrrFacRouteProtectedTunEgressLSRId.
cmplsFrrFacRouteDBEntry entry .1.3.6.1.4.1.9.10.98.2.3.1.1
An entry in the mplsFrrDBTable represents a single protected
LSP, protected by a backup tunnel and defined for a specific
protected interface. Note that for brevity, managers should
consult the mplsTunnelTable present i…
Indexes
cmplsFrrFacRouteProtectedIfIndex cmplsFrrFacRouteProtectingTunIndex cmplsFrrFacRouteProtectedTunIndex cmplsFrrFacRouteProtectedTunInstance cmplsFrrFacRouteProtectedTunIngressLSRId cmplsFrrFacRouteProtectedTunEgressLSRId
Column Syntax OID
cmplsFrrFacRouteProtectedIfIndex
Uniquely identifies the interface configured for FRR protection.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.9.10.98.2.3.1.1.1
cmplsFrrFacRouteProtectingTunIndex
Uniquely identifies the mplsTunnelEntry primary index for
the tunnel head interface designated to protect the
interface as specified in the mplsFrrFacRouteIfProtectedIndex
(and all of the tunnels using this interface).
MPLS-TC-STD-MIBMplsTunnelIndex
Textual Convention: MPLS-TC-STD-MIBMplsTunnelIndex Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.10.98.2.3.1.1.2
cmplsFrrFacRouteProtectedTunIndex
Uniquely identifies an mplsTunnelEntry that is
being protected by FRR.
MPLS-TC-STD-MIBMplsTunnelIndex
Textual Convention: MPLS-TC-STD-MIBMplsTunnelIndex Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.10.98.2.3.1.1.3
cmplsFrrFacRouteProtectedTunInstance
Uniquely identifies an mplsTunnelEntry that is
being protected by FRR.
MPLS-TC-STD-MIBMplsTunnelInstanceIndex
Textual Convention: MPLS-TC-STD-MIBMplsTunnelInstanceIndex Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.98.2.3.1.1.4
cmplsFrrFacRouteProtectedTunIngressLSRId
Uniquely identifies an mplsTunnelEntry that is
being protected by FRR.
MPLS-TC-STD-MIBMplsLsrIdentifier
Textual Convention: MPLS-TC-STD-MIBMplsLsrIdentifier OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.9.10.98.2.3.1.1.5
cmplsFrrFacRouteProtectedTunEgressLSRId
Uniquely identifies an mplsTunnelEntry that is
being protected by FRR.
MPLS-TC-STD-MIBMplsLsrIdentifier
Textual Convention: MPLS-TC-STD-MIBMplsLsrIdentifier OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.9.10.98.2.3.1.1.6
cmplsFrrFacRouteProtectedTunStatus
Specifies the state of the protected tunnel.

active This tunnel's label has been placed in the
LFIB and is ready to be applied to incoming
packets.

ready - This…
Enumeration
Enumerated Values:
1active
2ready
3partial
 .1.3.6.1.4.1.9.10.98.2.3.1.1.7
cmplsFrrFacRouteProtectingTunResvBw
Specifies the amount of bandwidth in megabytes per second
that is actually reserved by the backup tunnel for
facility backup. This value is repeated here from the MPLS-
TE MIB because the tunnel entry will reveal the ba…
MPLS-TC-STD-MIBMplsBitRate
Textual Convention: MPLS-TC-STD-MIBMplsBitRate Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.98.2.3.1.1.8
cmplsFrrFacRouteProtectingTunProtectionType
Indicates type of the resource protection.
Enumerationr/w
Enumerated Values:
0linkProtection
1nodeProtection
 .1.3.6.1.4.1.9.10.98.2.3.1.1.9