Standard view Table view

CISCO-GPRS-L2RLY-MIB

        The MIB Module for managing the General Packet Radio 
Service(GPRS) L2RLY related information on Servicing
GPRS Support Node(SGSN).
In GPRS network, a SGSN is typically implemented as
a single node; in cisco-Alcatel joint development,
it's split into Telecom part (T-node) and Datacom
part (D-node). T-nodes and D-nodes are connected
by two fast ethernets. A simple connectionless protocol
called L2RLY is used to provide service of forwarding
packet between T-unit and D-unit, flow control and
defending against the failure of a FE subnet.
Last revised
Identity
ciscoGprsL2rlyMIB
Base OID
1.3.6.1.4.1.9.9.9993
Imported Objects
CISCO-SMI ciscoMgmt
IF-MIB InterfaceIndex
SNMPv2-CONF MODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMI Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
SNMPv2-TC RowStatus TruthValue
Objects (29)
ciscoGprsL2rlyMIB
.1.3.6.1.4.1.9.9.9993
ciscoGprsL2rlyObjects
.1.3.6.1.4.1.9.9.9993.1
ciscoGprsL2rlyConfig
.1.3.6.1.4.1.9.9.9993.1.1
cgprsL2rlyUid r/w
Integer32
 .1.3.6.1.4.1.9.9.9993.1.1.1
cgprsL2rlyUnitType r/w
Enumeration
 .1.3.6.1.4.1.9.9.9993.1.1.2
cgprsL2rlyEchoTimer r/w
secondsInteger32
 .1.3.6.1.4.1.9.9.9993.1.1.3
cgprsL2rlyFlowControlFlag r/w
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.9.9.9993.1.1.4
cgprsL2rlyDroppedPktsMonTime r/w
secondsInteger32
 .1.3.6.1.4.1.9.9.9993.1.1.5
cgprsL2rlyNoRespToKeepAliveMsgNotificationEnable r/w
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.9.9.9993.1.1.6
cgprsL2rlyUnitJoinNotificationEnable r/w
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.9.9.9993.1.1.7
cgprsL2rlyInterfaceTable
.1.3.6.1.4.1.9.9.9993.1.1.8
cgprsL2rlyInterfaceEntry
cgprsL2rlyInterfaceId
 .1.3.6.1.4.1.9.9.9993.1.1.8.1
cgprsL2rlyInterfaceId
IF-MIBInterfaceIndex
 .1.3.6.1.4.1.9.9.9993.1.1.8.1.1
cgprsL2rlyInterfaceRowStatus r/w
SNMPv2-TCRowStatus
 .1.3.6.1.4.1.9.9.9993.1.1.8.1.2
ciscoGprsL2rlyStats
.1.3.6.1.4.1.9.9.9993.1.2
cgprsL2rlyFlowControlTriggerCount
SNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.9993.1.2.1
cgprsL2rlyInputQLen
packetsSNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.9993.1.2.2
cgprsL2rlyTotalPacketsDropped
packetsSNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.9993.1.2.3
cgprsL2rlyDroppedPktsTimeFrame
secondsInteger32
 .1.3.6.1.4.1.9.9.9993.1.2.4
cgprsL2rlyDroppedPktsCount
packetsSNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.9993.1.2.5
cgprsL2rlyPeerTable
.1.3.6.1.4.1.9.9.9993.1.2.6
cgprsL2rlyPeerEntry
cgprsL2rlyPeerUidcgprsL2rlyInterfaceId
 .1.3.6.1.4.1.9.9.9993.1.2.6.1
cgprsL2rlyPeerUid
Integer32
 .1.3.6.1.4.1.9.9.9993.1.2.6.1.1
cgprsL2rlyPeerUnitType
Enumeration
 .1.3.6.1.4.1.9.9.9993.1.2.6.1.2
ciscoGprsL2rlyNotificationPrefix
.1.3.6.1.4.1.9.9.9993.2
ciscoGprsL2rlyNotifications
.1.3.6.1.4.1.9.9.9993.2.0
ciscoGprsL2rlyConformances
.1.3.6.1.4.1.9.9.9993.3
cgprsL2rlyCompliances
.1.3.6.1.4.1.9.9.9993.3.1
cgprsL2rlyGroups
.1.3.6.1.4.1.9.9.9993.3.2
Notifications / Traps (2)
NameOIDDescription
cgprsL2rlyUnitJoinNotification
cgprsL2rlyUid
.1.3.6.1.4.1.9.9.9993.2.0.1 
This trap indicates that a new 'SGSN T-node' joins the service.
This happens when a new SGSN node restarts or the network
problem (fast ethernets among the units) recovers.
cgprsL2rlyNoRespToKeepAliveMsgNotification
cgprsL2rlyUid
.1.3.6.1.4.1.9.9.9993.2.0.2 
This trap indicates that the 'SGSN T-node' failed to respond to
the L2 Relay 'Keep Alive' message. The cgprsL2rlyUid variable identifies
the  'SGSN T-node' that failed to respond.