CISCO-FCOE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

cfcoeCfgTable

table

.1.3.6.1.4.1.9.9.673.1.1.1 · 1 row entry · 6 columns

Open in standard view

This table facilitates configuration of FCoE parameters
on a per Fibre Channel management instance.

cfcoeCfgEntry entry .1.3.6.1.4.1.9.9.673.1.1.1.1

There is one entry in this table for each
Fibre Channel management instance.

Indexes

FC-MGMT-MIBfcmInstanceIndex FC-MGMT-MIBfcmSwitchIndex

Column Syntax OID

cfcoeCfgFcmap

This object configures the FC-MAP value used by the FCF
when operating in FPMA mode. The default value is 0EFC00h,
as written in the standard.

OctetStringr/w

Constraints:
range: 3-3

.1.3.6.1.4.1.9.9.673.1.1.1.1.1

cfcoeCfgDynamicVfcCreation

This object allows the user to enable (TRUE)
or disable (FALSE) dynamic VFC interface creation on the FCF.
When set to TRUE VFC interfaces are dynamically created when a
FIP based FLOGI or ELP request is received.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.673.1.1.1.1.2

cfcoeCfgDynamicVfcAgeTimer

This ageing timer (in seconds) is used by the FCF to age out
dynamically created VFC interfaces. The default value is
300 seconds.

Unsigned32r/w

Constraints:
range: 10-1000000

.1.3.6.1.4.1.9.9.673.1.1.1.1.3

cfcoeCfgDefaultFCFPriority

The FIP priority value advertised by the FCF to ENodes by
default. cfcoeStaticVfcFCFPriority configured for a VFC
interface overrides this setting for the ENode associated
with the VFC.

Unsigned32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.9.9.673.1.1.1.1.4

cfcoeCfgDATov

The Discovery_Advertisement_Timeout value configured for
the FCF. This is used as the timeout value in seconds by
the FCF to send periodic Discovery Advertisements.

Unsigned32r/w

Constraints:
range: 1-60

.1.3.6.1.4.1.9.9.673.1.1.1.1.5

cfcoeCfgAddressingMode

Addressing mode(s) supported by the FCF. Implementations should
fail set requests for unsupported modes.

Enumerationr/w

Enumerated Values:

1	fpma
2	spma
3	both

.1.3.6.1.4.1.9.9.673.1.1.1.1.6

cfcoeVLANTable

table

.1.3.6.1.4.1.9.9.673.1.1.2 · 1 row entry · 4 columns

Open in standard view

This table facilitates configuration of VLAN and Fabric (VSAN)
associations in an FCoE network. FCoE forwarding for a fabric 
is over a VLAN in a L2 Ethernet network.  That is, reachability
between the ENode/remote-FCF and an FCF for a given fabric is
determined by the reachability provided by the Ethernet network
on the corresponding VLAN. 
          
An active entry in this table indicates the VLAN that is used 
to transport FCoE traffic for a certain VSAN.
          
Some implmentations may allow traffic from only one VSAN to be
transported over a given VLAN. Such implmentations should 
prevent multiple entries with the same VLAN ID or the VSAN ID 
from being created in this table.
          
Modifying existing VLAN-VSAN associations is not supported.
Entries must be deleted first and then recreated.

cfcoeVLANEntry entry .1.3.6.1.4.1.9.9.673.1.1.2.1

There is one entry in this table for each VLAN that is
designated to transport FCoE traffic for a given fabric
(VSAN).

Indexes

FC-MGMT-MIBfcmInstanceIndex FC-MGMT-MIBfcmSwitchIndex cfcoeVLANIndex cfcoeFabricIndex

Column Syntax OID

cfcoeVLANIndex

This object identifies the VLAN ID that FCoE FCF function is
being enabled for.

Q-BRIDGE-MIBVlanIndex

Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32

.1.3.6.1.4.1.9.9.673.1.1.2.1.1

cfcoeFabricIndex

This object identifies the Fabric Index of the VSAN traffic
for which can be transported over the VLAN identified by
cfcoeVLANIndex.

T11-TC-MIBT11FabricIndex

Textual Convention: T11-TC-MIBT11FabricIndex Unsigned32

Type Constraints:
range: 0..4095

.1.3.6.1.4.1.9.9.673.1.1.2.1.2

cfcoeVLANOperState

Operational state of this VLAN-VSAN association entry.
The 'up' state is achieved when both the VSAN and VLAN
are valid.

Enumeration

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.9.9.673.1.1.2.1.3

cfcoeVLANRowStatus

The status of this conceptual row. The RowStatus becomes active
on successful creation of an entry.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.9.9.673.1.1.2.1.4

cfcoeStaticVfcTable

table

.1.3.6.1.4.1.9.9.673.1.1.3 · 1 row entry · 9 columns

Open in standard view

This table facilitates the creation and deletion of static
VFC interfaces. While VFCs can be dynamically created based on
FIP FLOGI/ELP requests users may want to associate certain
pre-configured policy for a particular ENode or a remote-FCF.
In such cases static VFC creation becomes necessary. In addition
to creating a static VFC it also needs to be associated to an
ENode or remote-FCF. The VFC binding provides such an 
associaton. Binding may occur after a VFC is created.

cfcoeStaticVfcEntry entry .1.3.6.1.4.1.9.9.673.1.1.3.1

There is one entry in this table for each statically created
VFC Interface.

Indexes

FC-MGMT-MIBfcmInstanceIndex FC-MGMT-MIBfcmSwitchIndex cfcoeStaticVfcIndex

Column Syntax OID

cfcoeStaticVfcIndex

This index uniquely identifies a static VFC entry in this
table.

Unsigned32

Constraints:
range: 1-65535

.1.3.6.1.4.1.9.9.673.1.1.3.1.1

cfcoeStaticVfcFCFPriority

If this VFC is for a VF_Port this object is used to configure
FCF priority to be advertised to the ENode associated with the
VFC.

Unsigned32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.9.9.673.1.1.3.1.2

cfcoeStaticVfcBindType

The mechanism to identify the ENode associated with this VFC
if it is of type VF_Port or to identify the remote-FCF
associated with this VFC if it is of type VE_Port.

VfcBindTyper/w

Textual Convention: VfcBindType Enumeration

Type Values:

1	interfaceIndex
2	macAddress

.1.3.6.1.4.1.9.9.673.1.1.3.1.3

cfcoeStaticVfcBindIfIndex

This object allows for configuration of ifIndex of
the ethernet interface over which the FCF reaches
the ENode or the remote-FCF that this VFC identifies.
This object is to be used only when the ENode or the
remote-FCF …

IF-MIBInterfaceIndexOrZeror/w

Textual Convention: IF-MIBInterfaceIndexOrZero Integer32

Type Constraints:
range: 0..2147483647

.1.3.6.1.4.1.9.9.673.1.1.3.1.4

cfcoeStaticVfcBindMACAddress

This object allows the user to configure MAC address of the
ENode or the remote-FCF that this VFC interface identifies.
An ENode or remote-FCF is associated to this VFC only if the
source MAC address in the FIP frames m…

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.9.9.673.1.1.3.1.5

cfcoeStaticVfcIfIndex

The ifIndex of this virtual FC interface.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.9.9.673.1.1.3.1.6

cfcoeStaticVfcCreationTime

The timestamp of this entry's creation time.

SNMPv2-TCTimeStamp

Textual Convention: SNMPv2-TCTimeStamp Unsigned32

.1.3.6.1.4.1.9.9.673.1.1.3.1.7

cfcoeStaticVfcFailureCause

The cause of failure for the last bind operation. This
object will be zero length if and only if the bind is
successful.

SNMP-FRAMEWORK-MIBSnmpAdminString

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.673.1.1.3.1.8

cfcoeStaticVfcRowStatus

The status of this conceptual row. The RowStatus becomes active
on successful creation of a virtual interface. The VFC must be
bound before it can become operational.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.9.9.673.1.1.3.1.9

cfcoeEnodeIntfTable

table

.1.3.6.1.4.1.9.9.673.1.2.3 · 1 row entry · 2 columns

Open in standard view

The (conceptual) table containing the interfaces on an
Ethernet bridge that are directly connected to ENodes.
A FIP Snooping bridge will automatically configure ACLs on
these interfaces based on FIP login requests and responses.

cfcoeEnodeIntfEntry entry .1.3.6.1.4.1.9.9.673.1.2.3.1

An entry (conceptual row) in the cfcoeEnodeIntfTable,
representing an interface directly connected to an ENode
on the Ethernet Bridge.

Indexes

cfcoeEnodeIntfIfIndex

Column Syntax OID

cfcoeEnodeIntfIfIndex

The ifIndex of the interface on the Ethernet bridge connected
to an Enode.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.9.9.673.1.2.3.1.1

cfcoeEnodeIntfRowStatus

The status of this conceptual row.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.9.9.673.1.2.3.1.2