CISCO-ENTITY-QFP-MIB

        This MIB module defines managed objects that facilitate the
management of Quantum Flow Processors (QFP), which are listed
in the ENTITY-MIB (RFC 4133) entPhysicalTable as an
entPhysicalClass of 'cpu'.
        
The Quantum Flow Processors (QFP) technology is an architecture
family developed by Cisco, which has fully integrated and
programmable networking chip set that controls different
functions of a system such as packet forwarding.
        
This module contains objects to monitor various QFP
statistics such as system, utilization, memory, etc.
        
The utilization statistics can be used for future capacity
planning. The calculation of this statistics may vary by
devices which host QFPs, hence the user must refer to the
specific device document of interest for the exact method
of calculation. The utilization statistics have the following
terminology.
        
o Input - Communication channel where packets arrive on the
          QFP.
        
o Output - Communication channel where packets leave the QFP.
        
o Priority - A classification applied to packets indicating
             they should be treated with greater urgency.
        
o Non-Priority - A classification applied to packets indicating
                 they should be treated with lesser urgency.
        
o Processing Load - The percentage of time over some interval
                    that the QFP has spent forwarding packets,
                    relative to the total time spent both 
                    forwarding packets and being idle.
    
ciscoEntityQfpMIB 1.3.6.1.4.1.9.9.715
Imported Objects
CISCO-SMI ciscoMgmt
ENTITY-MIB entPhysicalIndex
HCNUM-TC CounterBasedGauge64
SNMPv2-CONF MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMI Counter32 Counter64 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TC DateAndTime TEXTUAL-CONVENTION TruthValue
Type Definitions (4)
CiscoQfpBitRate Unsigned64
CiscoQfpMemoryResource Enumeration
dram(1)
CiscoQfpPacketRate Unsigned64
CiscoQfpTimeInterval Enumeration
fiveSeconds(1)
oneMinute(2)
fiveMinutes(3)
sixtyMinutes(4)
Objects (62)
ciscoEntityQfpMIB .1.3.6.1.4.1.9.9.715
ciscoEntityQfpMIBNotifs .1.3.6.1.4.1.9.9.715.0
ciscoEntityQfpMIBObjects .1.3.6.1.4.1.9.9.715.1
ciscoEntityQfp .1.3.6.1.4.1.9.9.715.1.1
ceqfpSystemTable .1.3.6.1.4.1.9.9.715.1.1.1
ceqfpSystemEntry ENTITY-MIBentPhysicalIndex .1.3.6.1.4.1.9.9.715.1.1.1.1
ceqfpSystemTrafficDirection Enumeration .1.3.6.1.4.1.9.9.715.1.1.1.1.1
ceqfpSystemState Enumeration .1.3.6.1.4.1.9.9.715.1.1.1.1.2
ceqfpNumberSystemLoads SNMPv2-SMICounter32 .1.3.6.1.4.1.9.9.715.1.1.1.1.3
ceqfpSystemLastLoadTime SNMPv2-TCDateAndTime .1.3.6.1.4.1.9.9.715.1.1.1.1.4
ceqfpFiveSecondUtilAlgo Enumeration .1.3.6.1.4.1.9.9.715.1.1.2
ceqfpOneMinuteUtilAlgo Enumeration .1.3.6.1.4.1.9.9.715.1.1.3
ceqfpFiveMinutesUtilAlgo Enumeration .1.3.6.1.4.1.9.9.715.1.1.4
ceqfpSixtyMinutesUtilAlgo Enumeration .1.3.6.1.4.1.9.9.715.1.1.5
ceqfpUtilizationTable .1.3.6.1.4.1.9.9.715.1.1.6
ceqfpUtilizationEntry ENTITY-MIBentPhysicalIndexceqfpUtilTimeInterval .1.3.6.1.4.1.9.9.715.1.1.6.1
ceqfpUtilTimeInterval CiscoQfpTimeInterval .1.3.6.1.4.1.9.9.715.1.1.6.1.1
ceqfpUtilOutputNonPriorityPktRate packets per secondCiscoQfpPacketRate .1.3.6.1.4.1.9.9.715.1.1.6.1.10
ceqfpUtilOutputNonPriorityBitRate bits per secondCiscoQfpBitRate .1.3.6.1.4.1.9.9.715.1.1.6.1.11
ceqfpUtilOutputTotalPktRate packets per secondCiscoQfpPacketRate .1.3.6.1.4.1.9.9.715.1.1.6.1.12
ceqfpUtilOutputTotalBitRate bits per secondCiscoQfpBitRate .1.3.6.1.4.1.9.9.715.1.1.6.1.13
ceqfpUtilProcessingLoad percentUnsigned32 .1.3.6.1.4.1.9.9.715.1.1.6.1.14
ceqfpUtilInputPriorityPktRate packets per secondCiscoQfpPacketRate .1.3.6.1.4.1.9.9.715.1.1.6.1.2
ceqfpUtilInputPriorityBitRate bits per secondCiscoQfpBitRate .1.3.6.1.4.1.9.9.715.1.1.6.1.3
ceqfpUtilInputNonPriorityPktRate packets per secondCiscoQfpPacketRate .1.3.6.1.4.1.9.9.715.1.1.6.1.4
ceqfpUtilInputNonPriorityBitRate bits per secondCiscoQfpBitRate .1.3.6.1.4.1.9.9.715.1.1.6.1.5
ceqfpUtilInputTotalPktRate packets per secondCiscoQfpPacketRate .1.3.6.1.4.1.9.9.715.1.1.6.1.6
ceqfpUtilInputTotalBitRate bits per secondCiscoQfpBitRate .1.3.6.1.4.1.9.9.715.1.1.6.1.7
ceqfpUtilOutputPriorityPktRate packets per secondCiscoQfpPacketRate .1.3.6.1.4.1.9.9.715.1.1.6.1.8
ceqfpUtilOutputPriorityBitRate bits per secondCiscoQfpBitRate .1.3.6.1.4.1.9.9.715.1.1.6.1.9
ceqfpMemoryResourceTable .1.3.6.1.4.1.9.9.715.1.1.7
ceqfpMemoryResourceEntry ENTITY-MIBentPhysicalIndexceqfpMemoryResType .1.3.6.1.4.1.9.9.715.1.1.7.1
ceqfpMemoryResType CiscoQfpMemoryResource .1.3.6.1.4.1.9.9.715.1.1.7.1.1
ceqfpMemoryResInUseOvrflw kilo bytesSNMPv2-SMIGauge32 .1.3.6.1.4.1.9.9.715.1.1.7.1.10
ceqfpMemoryHCResInUse kilo bytesHCNUM-TCCounterBasedGauge64 .1.3.6.1.4.1.9.9.715.1.1.7.1.11
ceqfpMemoryResFreeOvrflw kilo bytesSNMPv2-SMIGauge32 .1.3.6.1.4.1.9.9.715.1.1.7.1.12
ceqfpMemoryHCResFree kilo bytesHCNUM-TCCounterBasedGauge64 .1.3.6.1.4.1.9.9.715.1.1.7.1.13
ceqfpMemoryResLowFreeWatermarkOvrflw kilo bytesSNMPv2-SMIGauge32 .1.3.6.1.4.1.9.9.715.1.1.7.1.14
ceqfpMemoryHCResLowFreeWatermark kilo bytesHCNUM-TCCounterBasedGauge64 .1.3.6.1.4.1.9.9.715.1.1.7.1.15
ceqfpMemoryResTotal kilo bytesSNMPv2-SMIGauge32 .1.3.6.1.4.1.9.9.715.1.1.7.1.2
ceqfpMemoryResInUse kilo bytesSNMPv2-SMIGauge32 .1.3.6.1.4.1.9.9.715.1.1.7.1.3
ceqfpMemoryResFree kilo bytesSNMPv2-SMIGauge32 .1.3.6.1.4.1.9.9.715.1.1.7.1.4
ceqfpMemoryResLowFreeWatermark kilo bytesSNMPv2-SMIGauge32 .1.3.6.1.4.1.9.9.715.1.1.7.1.5
ceqfpMemoryResRisingThreshold r/w percentUnsigned32 .1.3.6.1.4.1.9.9.715.1.1.7.1.6
ceqfpMemoryResFallingThreshold r/w percentUnsigned32 .1.3.6.1.4.1.9.9.715.1.1.7.1.7
ceqfpMemoryResTotalOvrflw kilo bytesSNMPv2-SMIGauge32 .1.3.6.1.4.1.9.9.715.1.1.7.1.8
ceqfpMemoryHCResTotal kilo bytesHCNUM-TCCounterBasedGauge64 .1.3.6.1.4.1.9.9.715.1.1.7.1.9
ceqfpThroughputTable .1.3.6.1.4.1.9.9.715.1.1.8
ceqfpThroughputEntry ENTITY-MIBentPhysicalIndex .1.3.6.1.4.1.9.9.715.1.1.8.1
ceqfpThroughputLicensedBW bits per secondSNMPv2-SMICounter64 .1.3.6.1.4.1.9.9.715.1.1.8.1.1
ceqfpThroughputLevel Enumeration .1.3.6.1.4.1.9.9.715.1.1.8.1.2
ceqfpThroughputInterval r/w secondsInteger32 .1.3.6.1.4.1.9.9.715.1.1.8.1.3
ceqfpThroughputThreshold r/w percentInteger32 .1.3.6.1.4.1.9.9.715.1.1.8.1.4
ceqfpThroughputAvgRate bits per secondSNMPv2-SMICounter64 .1.3.6.1.4.1.9.9.715.1.1.8.1.5
ciscoEntityQfpNotif .1.3.6.1.4.1.9.9.715.1.2
ceqfpMemoryResThreshNotifEnabled r/w SNMPv2-TCTruthValue .1.3.6.1.4.1.9.9.715.1.2.1
ceqfpMemoryResCurrentRisingThresh percentUnsigned32 .1.3.6.1.4.1.9.9.715.1.2.2
ceqfpMemoryResCurrentFallingThresh percentUnsigned32 .1.3.6.1.4.1.9.9.715.1.2.3
ceqfpThroughputNotifEnabled r/w SNMPv2-TCTruthValue .1.3.6.1.4.1.9.9.715.1.2.4
ciscoEntityQfpMIBConform .1.3.6.1.4.1.9.9.715.2
ciscoEntityQfpMIBCompliances .1.3.6.1.4.1.9.9.715.2.1
ciscoEntityQfpMIBGroups .1.3.6.1.4.1.9.9.715.2.2
Notifications / Traps (3)
NameOIDDescription
ceqfpMemoryResRisingThreshNotif .1.3.6.1.4.1.9.9.715.0.1
A notification indicating that the QFP memory usage is rising
the threshold on this memory resource.
          
This notification will be sent, whenever the QFP memory
usage (ceqfpMemoryResInUse) is equal to or above the 
rising threshold (ceqfpMemoryResRisingThreshold).
          
An agent may throttle the generation of consecutive
ceqfpMemoryResRisingThreshNotif notification so that
there is at least a five second (suggested default)
gap between notification of this type.
ceqfpMemoryResFallingThreshNotif .1.3.6.1.4.1.9.9.715.0.2
A notification indicating that the QFP memory usage is equal
to or below the falling threshold on this memory resource.
          
This notification will be sent, whenever the QFP memory
usage (ceqfpMemoryResInUse) is equal to or below the 
falling threshold (ceqfpMemoryResFallingThreshold).
          
An agent may throttle the generation of consecutive
ceqfpMemoryResFallingThreshNotif notification so that
there is at least a five second (suggested default)
gap between notification of this type.
ceqfpThroughputNotif .1.3.6.1.4.1.9.9.715.0.3
A notification indicating that the average throughput rate for
the configured interval has exceeded the threshold or reached
maximum bandwidth allowed.
          
This notification will be sent, whenever the ceqfpThroughputLevel
object has the value warning(2) or exceed(3). The condition for
trap generation will be checked in every
ceqfpThroughputInterval.
          
ceqfpThroughputNotif with ceqfpThrougputLevel as warning(2)
indicates that average throughput rate has crossed the
configured threshold.
          
ceqfpThroughputNotif with ceqfpThrougputLevel as exceed(3)
indicates that average throughput rate has reached maximum
licensed bandwidth.