CISCO-ENTITY-PFE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

cePfePerfConfigTable

table

.1.3.6.1.4.1.9.9.265.1.1.1 · 1 row entry · 8 columns

Open in standard view

This table contains configuration information on a PFE 
pipeline.

cePfePerfConfigEntry entry .1.3.6.1.4.1.9.9.265.1.1.1.1

An entry will exist for each entry in the entPhysicalTable
that correspond to an active PFE pipeline.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
cePfePerfConfigTimeElapsed The number of seconds that have elapsed since the beginning of the current 15 min interval. If for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value,…	secondsUnsigned32 Constraints: `range: 0-899`	`.1.3.6.1.4.1.9.9.265.1.1.1.1.1`
cePfePerfConfigValidIntervals The number of completed 15 min intervals for which valid PFE performance data has been collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be …	Unsigned32 Constraints: `range: 0-96`	`.1.3.6.1.4.1.9.9.265.1.1.1.1.2`
cePfePerfConfigThldUtilization This object contains the threshold value for the cePfePerfCurrentUtilization object. If during the last 5 second measurement period the cePfePerfCurrentUtilization object becomes greater than or equal to this threshold…	Percentager/w Textual Convention: Percentage `Unsigned32` Type Constraints: `range: 0..100`	`.1.3.6.1.4.1.9.9.265.1.1.1.1.3`
cePfePerfConfigThldEfficiency This object contains the threshold value for the cePfePerfCurrentEffciency object. If during the last 5 second measurement period the cePfePerfCurrentEfficiency object becomes less than or equal to this threshold valu…	Percentager/w Textual Convention: Percentage `Unsigned32` Type Constraints: `range: 0..100`	`.1.3.6.1.4.1.9.9.265.1.1.1.1.4`
cePfePerfConfigThld1MinUtilization This object contains the threshold value for the cePfePerfCurrent1MinUtilization object. If during the last 1 minute measurement period the cePfePerfCurrent1MinUtilization object becomes greater than or equal to this t…	Percentager/w Textual Convention: Percentage `Unsigned32` Type Constraints: `range: 0..100`	`.1.3.6.1.4.1.9.9.265.1.1.1.1.5`
cePfePerfConfigThld1MinEfficiency This object contains the threshold value for the cePfePerfCurrent1MinEfficiency object. If during the last 1 minute measurement period the cePfePerfCurrent1MinEfficiency object becomes less than or equal to this thres…	Percentager/w Textual Convention: Percentage `Unsigned32` Type Constraints: `range: 0..100`	`.1.3.6.1.4.1.9.9.265.1.1.1.1.6`
cePfePerfConfigThld5MinUtilization This object contains the threshold value for the cePfePerfCurrent5MinUtilization object. If during the last 5 minute measurement period the cePfePerfCurrent5MinUtilization object becomes greater than or equal to this t…	Percentager/w Textual Convention: Percentage `Unsigned32` Type Constraints: `range: 0..100`	`.1.3.6.1.4.1.9.9.265.1.1.1.1.7`
cePfePerfConfigThld5MinEfficiency This object contains the threshold value for the cePfePerfCurrent5MinEfficiency object. If during the last 5 minute measurement period the cePfePerfCurrent5MinEfficiency object becomes less than or equal to this thres…	Percentager/w Textual Convention: Percentage `Unsigned32` Type Constraints: `range: 0..100`	`.1.3.6.1.4.1.9.9.265.1.1.1.1.8`

cePfePerfCurrentTable

table

.1.3.6.1.4.1.9.9.265.1.1.2 · 1 row entry · 6 columns

Open in standard view

This table maintains PFE current running performance, which 
are collected at various measurement periods.

cePfePerfCurrentEntry entry .1.3.6.1.4.1.9.9.265.1.1.2.1

An entry containing performance information applicable to
a particular PFE pipeline.

Indexes

No indexes recorded

Column	Syntax	OID
cePfePerfCurrentUtilization This object provides the actual PFE percentage utilization. It is determined by the number of new work contexts + feedback contexts divided by total number of contexts that can be supported by the PFE pipeline.	CurrentUtilization Textual Convention: CurrentUtilization `Unsigned32` Type Constraints: `range: 0..100`	`.1.3.6.1.4.1.9.9.265.1.1.2.1.1`
cePfePerfCurrentEfficiency This object provides the actual PFE percentage efficiency. It is determined by the total number of contexts per second divided by maximum theoretical contexts per second supported by the PFE pipeline. Under normal co…	CurrentEfficiency Textual Convention: CurrentEfficiency `Unsigned32` Type Constraints: `range: 0..100`	`.1.3.6.1.4.1.9.9.265.1.1.2.1.2`
cePfePerfCurrent1MinUtilization This object provides the PFE percentage utilization over the previous 1 minute period. It is determined by the number of new work contexts + feedback contexts divided by total number of contexts that can be supported …	CurrentUtilization Textual Convention: CurrentUtilization `Unsigned32` Type Constraints: `range: 0..100`	`.1.3.6.1.4.1.9.9.265.1.1.2.1.3`
cePfePerfCurrent1MinEfficiency This object provides the PFE percentage efficiency over the previous 1 minute period. It is determined by the totalnumber of contexts per second divided by maximum theoretical contexts per second supported by the PFE p…	CurrentEfficiency Textual Convention: CurrentEfficiency `Unsigned32` Type Constraints: `range: 0..100`	`.1.3.6.1.4.1.9.9.265.1.1.2.1.4`
cePfePerfCurrent5MinUtilization This object provides the PFE percentage utilization over the previous 5 minutes period. It is determined by the number of new work contexts + feedback contexts divided by total number of contexts that can be supporte…	CurrentUtilization Textual Convention: CurrentUtilization `Unsigned32` Type Constraints: `range: 0..100`	`.1.3.6.1.4.1.9.9.265.1.1.2.1.5`
cePfePerfCurrent5MinEfficiency This object provides the PFE percentage efficiency over the previous 5 minutes period. It is determined by the total number of contexts per second divided by maximum theoretical contexts per second supported by the PF…	CurrentEfficiency Textual Convention: CurrentEfficiency `Unsigned32` Type Constraints: `range: 0..100`	`.1.3.6.1.4.1.9.9.265.1.1.2.1.6`

cePfePerfIntervalTable

table

.1.3.6.1.4.1.9.9.265.1.1.3 · 1 row entry · 3 columns

Open in standard view

This table contains performance statistics for completed 
15 minutes intervals, specifically up to 96 such intervals
over a 24 hours of operation.

cePfePerfIntervalEntry entry .1.3.6.1.4.1.9.9.265.1.1.3.1

An entry containing performance information applicable to
a particular PFE pipeline at a specific interval.

Indexes

ENTITY-MIBentPhysicalIndex cePfePerfIntervalNumber

Column	Syntax	OID
cePfePerfIntervalNumber An interval number between 1 and 96, where 1 is the most recently completed 15 min interval and 96 is the 15 min interval completed 23 hours and 45 minutes prior to interval 1.	Unsigned32 Constraints: `range: 1-96`	`.1.3.6.1.4.1.9.9.265.1.1.3.1.1`
cePfePerfIntervalUtilization The percentage of processor utilization by the PFE pipeline during this completed 15 min interval.	IntervalUtilization Textual Convention: IntervalUtilization `Unsigned32` Type Constraints: `range: 0..100`	`.1.3.6.1.4.1.9.9.265.1.1.3.1.2`
cePfePerfIntervalEfficiency The percentage of processor efficiency by the PFE pipeline during this completed 15 min interval. Under normal conditions, this number will be 100 and when efficiency starts degrading, it will start going down until it …	IntervalEfficiency Textual Convention: IntervalEfficiency `Unsigned32` Type Constraints: `range: 0..100`	`.1.3.6.1.4.1.9.9.265.1.1.3.1.3`

cePfePerfTotalTable

table

.1.3.6.1.4.1.9.9.265.1.1.4 · 1 row entry · 2 columns

Open in standard view

This table contains the running utilization and efficiency 
of the PFE pipeline for the 24 hour period preceding the 
current interval. If the agent was restarted less than 24
hours ago, i.e., when there are less than 96 intervals in the
cePfePerfIntervalTable, it will contain the running utiliza-
tion and efficiency up to the last collected 15 minute inter-
val.

cePfePerfTotalEntry entry .1.3.6.1.4.1.9.9.265.1.1.4.1

An entry containing performance information applicable to
a particular PFE pipeline at the end of each interval in the
cePfePerfIntervalTable.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
cePfePerfTotalUtilization The running utilization by the PFE pipeline for the prece- ding 24 hrs.	TotalUtilization Textual Convention: TotalUtilization `Unsigned32` Type Constraints: `range: 0..100`	`.1.3.6.1.4.1.9.9.265.1.1.4.1.1`
cePfePerfTotalEfficiency The running efficiency by the PFE pipeline for the preceding 24 hrs. Under normal conditions, this number will be 100 and when efficiency starts degrading, it will start going down until it reaches zero.	TotalEfficiency Textual Convention: TotalEfficiency `Unsigned32` Type Constraints: `range: 0..100`	`.1.3.6.1.4.1.9.9.265.1.1.4.1.2`

cePfeHistTable

table

.1.3.6.1.4.1.9.9.265.1.2.4 · 1 row entry · 7 columns

Open in standard view

This table contains a history of events generated by the 
agent.

cePfeHistEntry entry .1.3.6.1.4.1.9.9.265.1.2.4.1

An entry will exist for each event that has occured while
cePfeHistNotifiesEnable object is set to 'log(2)' or
'logAndNotify(4)'.

Indexes

cePfeHistIndex

Column Syntax OID

cePfeHistIndex

An integer value uniquely identifying the entry in the table.
The value of this object starts at '1' and monotonically
increases for each event condition transition monitored by the
agent. If the value of this object …

Unsigned32

Constraints:
range: 1-4294967295

.1.3.6.1.4.1.9.9.265.1.2.4.1.1

cePfeHistEntPhysIndex

The value in this object is equal to the value of the
entPhysicalIndex, from the Physical Entity Table (RFC 2037),
that is associated with the PFE pipeline that has caused
this event.

ENTITY-MIBPhysicalIndex

Textual Convention: ENTITY-MIBPhysicalIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.9.9.265.1.2.4.1.2

cePfeHistType

This object describes the type of event that has occurred.

HistEventType

Textual Convention: HistEventType Enumeration

Type Values:

1	thldUtilizationEvent
2	thldEfficiencyEvent
3	thld1MinUtilizationEvent
4	thld1MinEfficiencyEvent
5	thld5MinUtilizationEvent
6	thld5MinEfficiencyEvent
7	restartEvent

.1.3.6.1.4.1.9.9.265.1.2.4.1.3

cePfeHistThld

The configured value of the specific threshold.

Percentage

Textual Convention: Percentage Unsigned32

Type Constraints:
range: 0..100

.1.3.6.1.4.1.9.9.265.1.2.4.1.4

cePfeHistValue

The actual value of the specific performance objects, at the
time of the sample, which is related to the threshold event.

Percentage

Textual Convention: Percentage Unsigned32

Type Constraints:
range: 0..100

.1.3.6.1.4.1.9.9.265.1.2.4.1.5

cePfeHistRestartReason

The reason for which the PFE pipeline has restarted.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.265.1.2.4.1.6

cePfeHistTimeStamp

This object specifies the value of the sysUpTime object at
the time the event was generated.

SNMPv2-TCTimeStamp

Textual Convention: SNMPv2-TCTimeStamp Unsigned32

.1.3.6.1.4.1.9.9.265.1.2.4.1.7