CISCO-DYNAMIC-ARP-INSPECTION-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
35

cdaiLogBufferTable

table
.1.3.6.1.4.1.9.9.374.1.1.7 · 1 row entry · 9 columns
Open in standard view 
A table provides the information of logged ARP flows 
for system message generation.
cdaiLogBufferEntry entry .1.3.6.1.4.1.9.9.374.1.1.7.1
A row instance contains logged ARP flow data for system
message generation. Entries in the log are cleared once
system messages are generated on their behalf. A special
entry will be populated for accounting drops of al…
Indexes
cdaiLogBufferIndex
Column Syntax OID
cdaiLogBufferIndex
This object uniquely identifies a logged ARP flow in the buffer.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.9.9.374.1.1.7.1.1
cdaiLogBufferInterface
This object indicates the interface which sent the logged
ARP flow. Zero value indicates the special entry.
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.374.1.1.7.1.2
cdaiLogBufferVlan
This object indicates the VLAN number which the logged
ARP flow belongs to. Zero value indicates the special entry.
CISCO-PRIVATE-VLAN-MIBVlanIndexOrZero
Textual Convention: CISCO-PRIVATE-VLAN-MIBVlanIndexOrZero Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.9.9.374.1.1.7.1.3
cdaiLogBufferSenderMacAddress
This object indicates the sender MAC address of the logged
ARP flow. All zeros MAC address value indicates the
special entry.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.9.9.374.1.1.7.1.4
cdaiLogBufferSenderAddressType
This object indicates the sender Internet address type
of the logged ARP flow.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.374.1.1.7.1.5
cdaiLogBufferSenderIpAddress
This object indicates the sender Internet address
of the logged ARP flow. The type of this address is
determined by the value of cdaiLogBufferSenderAddressType
object. All zeros IP address value indicates the
special …
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.374.1.1.7.1.6
cdaiLogBufferReason
This object indicates the reason for logging this ARP flow.

'unknown' indicates unknown reason.

'deny' indicates that this ARP flow is logged because it is
denied by Dynamic ARP Inspection…
Enumeration
Enumerated Values:
1unknown
2deny
3aclDeny
4aclPermit
5dhcpDeny
6dhcpPermit
7probePermit
 .1.3.6.1.4.1.9.9.374.1.1.7.1.7
cdaiLogBufferLastUpdate
This object indicates the timestamp when the last packet
of this flow was accounted by the system.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.9.9.374.1.1.7.1.8
cdaiLogBufferPacketsCount
This object indicates the number of packets of this ARP flow
was accounted by the system.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.374.1.1.7.1.9

cdaiVlanConfigTable

table
.1.3.6.1.4.1.9.9.374.1.2.1 · 1 row entry · 2 columns
Open in standard view 
A table provides the mechanism to control Dynamic ARP
Inspection per VLAN. When a VLAN is created in a device
supporting this table, a corresponding entry of this table
will be added.
cdaiVlanConfigEntry entry .1.3.6.1.4.1.9.9.374.1.2.1.1
A row instance contains the configuration to enable
or disable Dynamic ARP Inspection at each existing VLAN.
Indexes
cdaiVlanIndex
Column Syntax OID
cdaiVlanIndex
This object indicates the VLAN number on which Dynamic ARP
Inspection feature is configured.
Q-BRIDGE-MIBVlanIndex
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.9.9.374.1.2.1.1.1
cdaiVlanDynArpInspEnable
This object indicates whether Dynamic ARP Inspection is
enabled in this VLAN.

If this object is set to 'true', Dynamic ARP Inspection
is enabled.

If this object is set to 'false', Dynamic …
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.374.1.2.1.1.2

cdaiVlanCfgTable

table
.1.3.6.1.4.1.9.9.374.1.2.2 · 1 row entry · 10 columns
Open in standard view 
A table provides the mechanism to control Dynamic ARP
Inspection per VLAN. This table is populated for each
existing VLAN in the device as well as non-existing VLANs
which contains the Dynamic ARP Inspection configuration.
cdaiVlanCfgEntry entry .1.3.6.1.4.1.9.9.374.1.2.2.1
A row instance contains the Dynamic ARP inspection
configuration for a specific VLAN in the device.
Indexes
cdaiVlanId
Column Syntax OID
cdaiVlanId
This object indicates the VLAN number.
Q-BRIDGE-MIBVlanIndex
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.9.9.374.1.2.2.1.1
cdaiVlanDynArpInspAdmin
This object specifies the administrative status of Dynamic
ARP Inspection feature in this VLAN.

If this object value is 'enable', Dynamic ARP Inspection
is enabled.

If this object value i…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.9.9.374.1.2.2.1.2
cdaiVlanDynArpInspOper
This object indicates the operational status of Dynamic ARP
Inspection feature in this VLAN.

If this object is 'active', Dynamic ARP Inspection
is operationally active.

If this object is …
Enumeration
Enumerated Values:
1active
2inactive
 .1.3.6.1.4.1.9.9.374.1.2.2.1.3
cdaiVlanFilterArpAclName
This object specifies an ARP ACL name that Dynamic ARP
Inspection feature uses to check the validity of the bindings
information in ARP body.

An emptry string indicates that no such ARP ACL is
configured…
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.374.1.2.2.1.4
cdaiVlanFilterArpAclStatic
This object specifies whether the ARP ACL denoted by
cdaiVlanFilterArpAclName is statically applied by
Dynamic ARP Inspection feature. This object does not
take effect if value of cdaiVlanFilterArpAclName on
the row is …
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.374.1.2.2.1.5
cdaiVlanAclLogging
This object specifies the logging configuration that
Dynamic ARP Inspection feature applies to ARP packets
when they are classified by the configured ACL.

'none' indicates that no logging is performed wh…
Enumerationr/w
Enumerated Values:
1none
2aclMatch
3deny
 .1.3.6.1.4.1.9.9.374.1.2.2.1.6
cdaiVlanDhcpBindingLogging
This object specifies packet logging configuration
performed by Dynamic ARP Inspection feature when
ARP packets is compared against DHCP bindings information.

'none' indicates that no packet logging is p…
Enumerationr/w
Enumerated Values:
1none
2permit
3deny
4all
 .1.3.6.1.4.1.9.9.374.1.2.2.1.7
cdaiVlanArpProbeLogging
The objects specifies if ARP-Probe packets will be
logged by Dynamic ARP Inspection feature.

'true' indicates ARP-Probe packets will be logged.

'false' indicates ARP-Probe packets will not …
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.374.1.2.2.1.8
cdaiVlanCfgStorageType
The objects specifies the storage type for this conceptual
row.
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
 .1.3.6.1.4.1.9.9.374.1.2.2.1.9
cdaiVlanCfgRowStatus
The status of this conceptual row entry. This object
is used to manage creation and deletion of rows in this
table.

Deletion of an entry in this table is only allowed
if the VLAN indicated by its row inde…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.9.374.1.2.2.1.10

cdaiIfConfigTable

table
.1.3.6.1.4.1.9.9.374.1.3.1 · 1 row entry · 1 columns
Open in standard view 
A table provides the mechanism to configure the trust
state for Dynamic ARP Inspection purpose at each physical
interface capable of this feature. Some of the interfaces
(but not limited to) for which this feature might be
applicable are: ifType = ethernetCsmacd(6).
cdaiIfConfigEntry entry .1.3.6.1.4.1.9.9.374.1.3.1.1
A row instance contains the configuration to enable or
disable trust state for Dynamic ARP Inspection at each
physical interface capable of this feature.
Indexes
IF-MIBifIndex
Column Syntax OID
cdaiIfTrustEnable
This object indicates whether the interface is trusted for
Dynamic ARP Inspection purpose.

If this object is set to 'true', the interface is trusted.
ARP packets coming to this interface will be forwarde…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.374.1.3.1.1.1

cdaiIfRateLimitTable

table
.1.3.6.1.4.1.9.9.374.1.3.2 · 1 row entry · 1 columns
Open in standard view 
A table provides the mechanism to configure the rate limit
for Dynamic ARP Inspection purpose at each physical interface
capable of this feature.
cdaiIfRateLimitEntry entry .1.3.6.1.4.1.9.9.374.1.3.2.1
A row instance contains the configuration of rate limit
Dynamic ARP Inspection at each physical interface capable
of this feature.
Indexes
IF-MIBifIndex
Column Syntax OID
cdaiIfRateLimit
This object indicates rate limit value for Dynamic ARP
Inspection purpose. If the incoming rate of ARP packets
exceeds the value of this object, ARP packets will be
dropped.
packet per secondSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.374.1.3.2.1.1

cdaiVlanStatsTable

table
.1.3.6.1.4.1.9.9.374.1.4.1 · 1 row entry · 12 columns
Open in standard view 
A table lists the Dynamic Arp Inspection statistics per VLAN.
cdaiVlanStatsEntry entry .1.3.6.1.4.1.9.9.374.1.4.1.1
A row instance contains Dynamic ARP Inspection statistics
information for each VLAN.
Indexes
cdaiVlanStatsIndex
Column Syntax OID
cdaiVlanStatsIndex
This object indicates the VLAN number.
Q-BRIDGE-MIBVlanIndex
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.9.9.374.1.4.1.1.1
cdaiVlanForwarded
This object indicates the number of ARP packets forwarded by
Dynamic Arp Inspection feature.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.374.1.4.1.1.2
cdaiVlanDropped
This object indicates the number of ARP packets dropped by
Dynamic ARP Inspection feature.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.374.1.4.1.1.3
cdaiVlanAclPermitted
This object indicates the number of ARP packets permitted by
the configured ACL.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.374.1.4.1.1.4
cdaiVlanDhcpBindingsPermitted
This object indicates the number of DHCP-binding permitted
ARP packets.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.374.1.4.1.1.5
cdaiVlanAclDenied
This object indicates the number of ARP packets denied by the
configured ACL.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.374.1.4.1.1.6
cdaiVlanDhcpBindingDenied
This object indicates the number of DHCP-binding denied
ARP packets.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.374.1.4.1.1.7
cdaiVlanSrcMacValidationFailures
This object indicates the number of ARP packets that fail
source MAC address validation.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.374.1.4.1.1.8
cdaiVlanDestMacValidationFailures
This object indicates the number of ARP packets that fail
destination MAC address validation.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.374.1.4.1.1.9
cdaiVlanIpValidationFailures
This object indicates the number of ARP packets that fail
IP validation.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.374.1.4.1.1.10
cdaiVlanArpProbePermitted
This object indicates the number of ARP Probe packets that
are permitted.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.374.1.4.1.1.11
cdaiVlanInvalidProtocolData
This object indicates the number of ARP packets that contain
invalid protocol data.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.374.1.4.1.1.12