CISCO-COPS-CLIENT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
10

ccopsServerConfigTable

table
.1.3.6.1.4.1.9.9.140.1.1.4 · 1 row entry · 5 columns
Open in standard view 
A list of possible COPS servers that the COPS client will
try to connect to in order of ccopsServerConfigPriority.
ccopsServerConfigEntry entry .1.3.6.1.4.1.9.9.140.1.1.4.1
A set of configuration information regarding a single COPS
server from the point of view of a COPS client. The entry
is created and deleted by using ccopsServerConfigStatus.

An entry may not exist in the a…
Indexes
ccopsServerConfigClientType ccopsServerConfigName
Column Syntax OID
ccopsServerConfigClientType
The type of policies to be retrieved from this server.
CopsClientType
Textual Convention: CopsClientType Enumeration
Type Values:
1rsvp
2provisioning
 .1.3.6.1.4.1.9.9.140.1.1.4.1.1
ccopsServerConfigName
The IP address or the hostname of a COPS server. If a hostname
is used, it will be resolved to an address prior to each attempt
to setup a connection to a PDP. If the PEP cannot resolve the
hostname, the connection atte…
OctetString
Constraints:
range: 1-64
 .1.3.6.1.4.1.9.9.140.1.1.4.1.2
ccopsServerConfigPriority
The priority of this entry relative to other entries.
The COPS client will attempt to contact COPS servers for
the appropriate Client-Type in the order of their
priority values. COPS servers designated by the COPS
prot…
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.140.1.1.4.1.3
ccopsServerConfigPort
The destination port number to which COPS server messages
should be sent. By default the COPS service will be provided
on the well-known COPS protocol port number 3288.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.9.140.1.1.4.1.4
ccopsServerConfigStatus
The status of COPS server configuration for a client type.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value.

Once a row becomes active, value in any oth…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.9.140.1.1.4.1.5

ccopsDomainTable

table
.1.3.6.1.4.1.9.9.140.1.1.8 · 1 row entry · 2 columns
Open in standard view 
A list of COPS domains for each client type supported in
the device.
ccopsDomainEntry entry .1.3.6.1.4.1.9.9.140.1.1.8.1
A set of domain configuration information regarding a
single COPS client type.

An entry will exist for each COPS client type which is
supported in the device.

For each COPS client type supporte…
Indexes
ccopsDomainClientType
Column Syntax OID
ccopsDomainClientType
The type of COPS client.
CopsClientType
Textual Convention: CopsClientType Enumeration
Type Values:
1rsvp
2provisioning
 .1.3.6.1.4.1.9.9.140.1.1.8.1.1
ccopsDomainName
The COPS domain which this client type belongs to.
This is so that a COPS server supporting multiple domains
can push the correct set of domain policies to this device.
Zero length name is default. COPS server have a d…
CopsDomainNamer/w
Textual Convention: CopsDomainName OctetString
Type Constraints:
range: 0..31
 .1.3.6.1.4.1.9.9.140.1.1.8.1.2

ccopsRoleTable

table
.1.3.6.1.4.1.9.9.140.1.1.9 · 1 row entry · 2 columns
Open in standard view 
A list of roles.  The number of entries is
determined by ccopsMaxRole.
ccopsRoleEntry entry .1.3.6.1.4.1.9.9.140.1.1.9.1
Entry containing COPS-PR role information. The entry is
created, deleted and modified by using ccopsRoleStatus.

There is a maximum on the number of roles which may be
configured per device. In order to ma…
Indexes
ccopsRoleName
Column Syntax OID
ccopsRoleName
The name of the role. Only roles which were defined in COPS
server should be used. COPS server will only supply the policies
for those roles defined in its database.
CopsRole
Textual Convention: CopsRole OctetString
Type Constraints:
range: 1..31
 .1.3.6.1.4.1.9.9.140.1.1.9.1.1
ccopsRoleStatus
This object is used to manage creation, deletion and
modification of rows in this table.

An entry may not exist in the active state unless all
objects in the entry have an appropriate value.
Once a row be…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.9.140.1.1.9.1.2

ccopsIfTable

table
.1.3.6.1.4.1.9.9.140.1.1.10 · 1 row entry · 1 columns
Open in standard view 
A list of interface entries.  An entry will exist for each
interface which supports COPS-PR feature.
ccopsIfEntry entry .1.3.6.1.4.1.9.9.140.1.1.10.1
Entry containing COPS status for a particular interface.

By default each interface has no roles. It then has a role
combination that is the zero length string.

Roles in a role combination for …
Indexes
IF-MIBifIndex
Column Syntax OID
ccopsIfRoleCombination
A display string, role combination, that is associated
with an interface. This is the administratively-desired
role combination which represents roles that are currently
set by the administrator for a particular interf…
CopsRoleCombinationr/w
Textual Convention: CopsRoleCombination OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.140.1.1.10.1.1