CISCO-CNO-SWITCH-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
12

cnosPortTable

table
.1.3.6.1.4.1.9.10.43.1.3.1 · 1 row entry · 10 columns
Open in standard view 
A list of configuration entries for individually
switched ports. There in one entry created
automatically for each switch port (ifType of
		 ethernetCsmacd) on the device.
cnosPortEntry entry .1.3.6.1.4.1.9.10.43.1.3.1.1
Configuration parameters for an individually
switched port.
Indexes
Column Syntax OID
cnosPortControllerRevision
Returns the revision number of the port controller.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.10.43.1.3.1.1.1
cnosPortName
A descriptive string of up to 80 characters used by
the network administrator to name a port.
OctetStringr/w
Constraints:
range: 0-80
 .1.3.6.1.4.1.9.10.43.1.3.1.1.2
cnosPortDuplexAdmin
Set to fullDuplex(1) to operate in full duplex mode:
port will allow simultaneous transmit and receive
which can double its bandwidth. Set to halfDuplex(2)
to operate in normal mode. Set to autoNegotiate(3) to
allow the…
Enumerationr/w
Enumerated Values:
1fullDuplex
2halfDuplex
3autoNegotiate
 .1.3.6.1.4.1.9.10.43.1.3.1.1.3
cnosPortDuplexStatus
The operating duplex mode of the switched port.
Enumeration
Enumerated Values:
1fullDuplex
2halfDuplex
 .1.3.6.1.4.1.9.10.43.1.3.1.1.4
cnosPortSpeedAdmin
Set to tenMbps(1) to operate in 10Mbps speed mode.
Set to oneHundredMbps(2) to operate in 100Mbps speed
mode. Set to autoNegotiate(3) to allow the switch
to negotiate with the other end of the connection.
Enumerationr/w
Enumerated Values:
1tenMbps
2oneHundredMbps
3autoNegotiate
 .1.3.6.1.4.1.9.10.43.1.3.1.1.5
cnosPortSpeedStatus
The operating speed of the switched port.
Enumeration
Enumerated Values:
1tenMbps
2oneHundredMbps
 .1.3.6.1.4.1.9.10.43.1.3.1.1.6
cnosPortMonitoring
Set to enabled(1) to forward receive and transmit
frames on this port to the port identified by
cnosSysConfigMonitorPort. Set to disabled(2)
to not monitor frame traffic on this port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.9.10.43.1.3.1.1.7
cnosPortLinkStatus
The current port link status.
Enumeration
Enumerated Values:
1link
2noLink
 .1.3.6.1.4.1.9.10.43.1.3.1.1.8
cnosPortSTPPortFastMode
This object configures the port into the Spanning
Tree port-fast mode. When enabled(1), the STP can
transition the port's state directly from blocking
to forwarding, and vice versa, without going through
the intermediat…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.9.10.43.1.3.1.1.9
cnosPortVlanMember
Set the port to be a member of a specified VLAN.
Set the port to all(5) to be shared among
all VLANs.
Enumerationr/w
Enumerated Values:
1vlan1
2vlan2
3vlan3
4vlan4
5all
 .1.3.6.1.4.1.9.10.43.1.3.1.1.10

cnosVlanTable

table
.1.3.6.1.4.1.9.10.43.1.4.1 · 1 row entry · 2 columns
Open in standard view 
Table containing a list of VLANs.
cnosVlanEntry entry .1.3.6.1.4.1.9.10.43.1.4.1.1
Information pertaining to a VLAN.
Indexes
cnosVlanIndex
Column Syntax OID
cnosVlanIndex
Identification of a VLAN entry.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.9.10.43.1.4.1.1.1
cnosVlanSTPState
The switch implements the 802.1d Spanning Tree
Algorithm & Protocol (STP) on all its port to detect
loops in the bridge topology. The user may, for
any reason, elect to disable the execution of STP,
by setting this obj…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.9.10.43.1.4.1.1.2