CISCO-ATM2-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

ciscoatmSigStatTable

table

.1.3.6.1.4.1.9.10.23.1.1 · 1 row entry · 20 columns

Open in standard view

This table contains ATM interface signalling monitoring
, one entry per ATM signalling interface.

ciscoatmSigStatEntry entry .1.3.6.1.4.1.9.10.23.1.1.1

This list contains signalling statistics variables.

Indexes

IF-MIBifIndex

Column	Syntax	OID
ciscoatmSigSSCOPConEvents SSCOP Connection Events Counter. This counter counts the sum of the following errors: 1) SSCOP Connection Disconnect Counter The abnormal occurrence of this event is characterized by the e…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.10.23.1.1.1.5`
ciscoatmSigSSCOPErrdPdus SSCOP Errored PDUs Counter. This counter counts the sum of the following errors: 1) Invalid PDUs. These are defined in SSCOP and consist of PDUs with incorrect length (MAA-ERROR code U), undefin…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.10.23.1.1.1.6`
ciscoatmSigDetectSetupAttempts Call Setup Attempts Counter. This counter counts the number of call setup attempts(both successful and unsuccessful) detected on this interface.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.10.23.1.1.1.7`
ciscoatmSigEmitSetupAttempts Call Setup Attempts Counter. This counter counts the number of call setup attempts(both successful and unsuccessful) transmitted on this interface.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.10.23.1.1.1.8`
ciscoatmSigDetectUnavailRoutes Number of Route Unavailability detected on this interface. This counter is incremented when a RELEASE, RELEASE COMPLETE (only when not preceded by a RELEASE mesg for the same call), ADD PARTY REJECT, or STATUS message t…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.10.23.1.1.1.9`
ciscoatmSigEmitUnavailRoutes Number of Route Unavailability transmitted from this interface. This counter is incremented when a RELEASE, RELEASE COMPLETE (only when not preceded by a RELEASE mesg for the same call), ADD PARTY REJECT, or STATUS mess…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.10.23.1.1.1.10`
ciscoatmSigDetectUnavailResrcs Number of Resource Unavailability detected on this interfrace. This counter is incremented when a RELEASE, RELEASE COMPLETE (only when not preceded by a RELEASE mesg for the same call), ADD PARTY REJECT, or STATUS mess…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.10.23.1.1.1.11`
ciscoatmSigEmitUnavailResrcs Number of Resource Unavailability transmitted from this interfrace. This counter is incremented when a RELEASE, RELEASE COMPLETE (only when not preceded by a RELEASE mesg for the same call), ADD PARTY REJECT, or STATUS…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.10.23.1.1.1.12`
ciscoatmSigDetectCldPtyEvents Number of Called Party Responsible For Unsuccessful Call detected on this interface. This counter is incremented when a RELEASE, RELEASE COMPLETE (only when not preceded by a RELEASE mesg for the same call), ADD PARTY R…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.10.23.1.1.1.13`
ciscoatmSigEmitCldPtyEvents Number of Called Party Responsible For Unsuccessful Call transmitted from this interface. This counter is incremented when a RELEASE, RELEASE COMPLETE (only when not preceded by a RELEASE mesg for the same call), ADD PA…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.10.23.1.1.1.14`
ciscoatmSigDetectMsgErrors Number of Incorrect Messages detected on this interface. The Incorrect Messages Counter reflects any sort of incorrect information in a message. This includes: - RELEASE, RELEASE COMPLETE, ADD PARTY REJ…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.10.23.1.1.1.15`
ciscoatmSigEmitMsgErrors Number of Incorrect Messages detected on this interface. The Incorrect Messages Counter reflects any sort of incorrect information in a message. This includes: - RELEASE, RELEASE COMPLETE…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.10.23.1.1.1.16`
ciscoatmSigDetectClgPtyEvents Number of Calling Party Events detected on this interface. This counter monitors error events that occur due to the originating user doing something wrong. This counter is incremented when a RELEASE, RELEASE COMPLETE (…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.10.23.1.1.1.17`
ciscoatmSigEmitClgPtyEvents Number of Calling Party Events transmitted from this interface. This counter monitors error events that occur due to the originating user doing something wrong. This counter is incremented when a RELEASE, RELEASE COMPL…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.10.23.1.1.1.18`
ciscoatmSigDetectTimerExpireds Number of Timer Expiries detected on this interface. The Timer Expiries Counter provides a count of network timer expiries, and to some extent, host or switch timer expiries. The conditions for incrementing this counte…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.10.23.1.1.1.19`
ciscoatmSigEmitTimerExpireds Number of Timer Expiries transmitted from this interface. The Timer Expiries Counter provides a count of network timer expiries, and to some extent, host or switch timer expiries. The conditions for incrementing this …	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.10.23.1.1.1.20`
ciscoatmSigDetectRestarts Number of Restart Activity errors detected on this interface. The Restart Activity Counter provides a count of host, switch, or network restart activity. This counter is incremented when receiving a RESTART message.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.10.23.1.1.1.21`
ciscoatmSigEmitRestarts Number of Restart Activity errors transmitted from this interface. The Restart Activity Counter provides a count of host, switch, or network restart activity. This counter is incremented when transmitting a RESTART mes…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.10.23.1.1.1.22`
ciscoatmSigInEstabls Number of SVC VCCs established at this signalling entity for incoming connections.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.10.23.1.1.1.23`
ciscoatmSigOutEstabls Number of SVC VCCs established at this signalling entity for outgoing connections.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.10.23.1.1.1.24`

ciscoatmSigSupportTable

table

.1.3.6.1.4.1.9.10.23.1.2 · 1 row entry · 8 columns

Open in standard view

This table contains ATM local interface configuration
parameters, one entry per ATM signalling interface.

ciscoatmSigSupportEntry entry .1.3.6.1.4.1.9.10.23.1.2.1

This list contains signalling configuration parameters
and state variables.

Indexes

IF-MIBifIndex

Column Syntax OID

ciscoatmSigSupportClgPtyNumDel

This object indicates whether the Calling Party Number
Information Element is transferred to the called party
address. The value of this object can be:
- enabled(1) This Information Element is transferred
…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.9.10.23.1.2.1.1

ciscoatmSigSupportClgPtySubAddr

This object indicates whether to accept and transfer
the Calling Party Subaddress Information Element from
the calling party to the called party. Calling party
subaddress information shall only be transferred to the
ca…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.9.10.23.1.2.1.2

ciscoatmSigSupportCldPtySubAddr

This object indicates whether to accept, transfer, and
deliver the Called Party Subaddress Information Element
from the calling party to the called party. The value
of this object can be:
- enabled(1) This Informati…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.9.10.23.1.2.1.3

ciscoatmSigSupportHiLyrInfo

This object indicates whether to accept, transfer, and
deliver the Broadband High Layer Information Element
from the calling party to the called party. The value
of this object can be:
- enabled(1) This Information …

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.9.10.23.1.2.1.4

ciscoatmSigSupportLoLyrInfo

This object indicates whether to accept, transfer, and
deliver the Broadband Low Layer Information Element
from the calling party to the called party. The value
of this object can be:
- enabled(1) This Information E…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.9.10.23.1.2.1.5

ciscoatmSigSupportBlliRepeatInd

This object indicates whether to accept, transfer, and
deliver the Broadband Repeat Indicator with two or
three instances of the Broadband Low Layer Information
Element for low layer information selection from the
calli…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.9.10.23.1.2.1.6

ciscoatmSigSupportAALInfo

This object indicates whether to accept, transfer, and
deliver the ATM Adaptation Layer Parameters Information
Element from the calling party to the called party.
The value of this object can be:
- enabled(1) This In…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.9.10.23.1.2.1.7

ciscoatmSigSupportUnknownIe

This object indicates whether to accept, transfer, and
deliver the unknown Information Element from the
calling party to the called party, when the IE instruction
field flag is set to zero.When the IE action flag is …

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.9.10.23.1.2.1.8

ciscoatmInterfaceExtTable

table

.1.3.6.1.4.1.9.10.23.1.3 · 1 row entry · 6 columns

Open in standard view

This table contains ATM interface configuration 
not defined in the atmInterfaceConfTable from the
ATM-MIB. This table has information on the VPI/VCI
range.

ciscoatmInterfaceExtEntry entry .1.3.6.1.4.1.9.10.23.1.3.1

An entry extends the atmInterfaceConfEntry defined
in ATM-MIB. Each entry corresponds to an ATM interface.

Indexes

No indexes recorded

Column	Syntax	OID
ciscoatmInterfaceConfMaxSvpcVpi The maximum VPI that the signalling stack on the ATM interface is configured to support for allocation to switched virtual path connections.	Integer32r/w Constraints: `range: 0-255`	`.1.3.6.1.4.1.9.10.23.1.3.1.16`
ciscoatmInterfaceCurrentMaxSvpcVpi The maximum VPI that the signalling stack on the ATM interface may currently allocate to switched virtual path connections. This value is the minimum of ciscoatmInterfaceConfMaxSvpcVpi, and the ciscoatmInterfaceConfMax…	Integer32 Constraints: `range: 0-255`	`.1.3.6.1.4.1.9.10.23.1.3.1.17`
ciscoatmInterfaceConfMaxSvccVpi The maximum VPI that the signalling stack on the ATM interface is configured to support for allocation to switched virtual channel connections.	Integer32r/w Constraints: `range: 0-255`	`.1.3.6.1.4.1.9.10.23.1.3.1.18`
ciscoatmInterfaceCurrentMaxSvccVpi The maximum VPI that the signalling stack on the ATM interface may currently allocate to switched virtual channel connections. This value is the minimum of ciscoatmInterfaceConfMaxSvccVpi, and the ciscoatmInterfaceConf…	Integer32 Constraints: `range: 0-255`	`.1.3.6.1.4.1.9.10.23.1.3.1.19`
ciscoatmInterfaceConfMinSvccVci The minimum VCI that the signalling stack on the ATM interface is configured to support for allocation to switched virtual channel connections.	Integer32r/w Constraints: `range: 32-4095`	`.1.3.6.1.4.1.9.10.23.1.3.1.20`
ciscoatmInterfaceCurrentMinSvccVci The minimum VCI that the signalling stack on the ATM interface may currently allocate to switched virtual channel connections. This value is the maximum of ciscoatmInterfaceConfMinSvccVci, and the ciscoatmInterfaceConf…	Integer32 Constraints: `range: 32-4095`	`.1.3.6.1.4.1.9.10.23.1.3.1.21`