CISCO-ATM-SWITCH-FR-RM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
12

cfaAdapterIfVcQThresholdTable

table
.1.3.6.1.4.1.9.9.110.1.1.1 · 1 row entry · 5 columns
Open in standard view 
A table of per-VC queue threshold parameters that are used
for congestion control for Frame Relay/FUNI to ATM
Interworking Function connections, on the Frame Relay Port
Adapter Module.
          
These objects become available as each Frame Relay
and FUNI interface is defined on the device. The
corresponding ifTypes are frameRelayService(44)
and atmFuni(106) respectively.
          
An unique set of threshold parameters are available for
every supported Interworking Function service
category, and would be applied to all connections
belonging to that particular service category, on that
Frame Relay or FUNI interface.
cfaAdapterIfVcQThresholdEntry entry .1.3.6.1.4.1.9.9.110.1.1.1.1
A set of per-VC queue threshold parameters that are used
for congestion control for Frame Relay/FUNI to ATM
Interworking Function connections, on the Frame Relay Port
Adapter Module.

The ifIndex in the inde…
Indexes
RFC1213-MIBifIndex cfaAdapterIfVcQService
Column Syntax OID
cfaAdapterIfVcQService
The service category of the connection to which this
entry applies.
CfaInterworkServiceCategory
Textual Convention: CfaInterworkServiceCategory Enumeration
Type Values:
1vbrNrt
2abr
3ubr
 .1.3.6.1.4.1.9.9.110.1.1.1.1.1
cfaAdapterIfVcQInqDiscThresh
This object defines the Discard Eligible threshold
applied to the Frame Relay - ATM interworking
virtual circuit input queue, on the Frame Relay
PAM.

The input queue is in the direction of
Frame Relay…
percentInteger32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.9.9.110.1.1.1.1.2
cfaAdapterIfVcQOutqDiscThresh
This object defines the Discard Eligible threshold
applied to the Frame Relay - ATM interworking
virtual circuit output queue, on the Frame Relay
PAM.

The output queue is in the direction of the ATM
sw…
percentInteger32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.9.9.110.1.1.1.1.3
cfaAdapterIfVcQInqMarkThresh
This object defines the Marking threshold
applied to the Frame Relay - ATM interworking
virtual circuit input queue, on the Frame Relay
PAM.

The input queue is in the direction of
Frame Relay/FUNI inte…
percentInteger32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.9.9.110.1.1.1.1.4
cfaAdapterIfVcQOutqMarkThresh
This object defines the Marking threshold
applied to the Frame Relay - ATM interworking
virtual circuit output queue, on the Frame Relay
PAM.

The output queue is in the direction of the ATM
switch fabric …
percentInteger32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.9.9.110.1.1.1.1.5

cfaAdapterIfVbrServOflowTable

table
.1.3.6.1.4.1.9.9.110.1.1.2 · 1 row entry · 1 columns
Open in standard view 
A table of Resource Management parameters that are used
for VBR Overflow Servicing for Frame Relay/FUNI to ATM
Interworking Function connections, on the Frame Relay
Port Adapter Module.
          
This object becomes available as each Frame Relay
and FUNI interface is defined on the device. The
corresponding ifTypes are frameRelayService(44)
and atmFuni(106) respectively.
cfaAdapterIfVbrServOflowEntry entry .1.3.6.1.4.1.9.9.110.1.1.2.1
A set of Resource Management parameters that are used
for VBR Overflow Servicing for Frame Relay/FUNI to ATM
Interworking Function connections, on the Frame Relay
Port Adapter Module.
Indexes
Column Syntax OID
cfaAdapterIfVbrServOflow
Configuration to enable the overflow feature for VBR-NRT
connections on the interface. When the PAM services VBR-NRT
VC input queues, sending ATM traffic to the switch
fabric, it can strictly limit the rate at which the…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.110.1.1.2.1.1

cfaAdapterIfFrConfigTable

table
.1.3.6.1.4.1.9.9.110.1.1.3 · 1 row entry · 1 columns
Open in standard view 
A table of resource management parameters for 
the Frame Relay interface on the FR/FUNI Port 
Adapter Module.
cfaAdapterIfFrConfigEntry entry .1.3.6.1.4.1.9.9.110.1.1.3.1
An entry in the table, containing information about
Resource Management of an Interface with Frame Relay
encapsulation.
Indexes
Column Syntax OID
cfaAdapterIfOverbooking
This object defines overbooking of CIR on an acess link/port
in percent of access rate. The total of all CIR's for all
frame-relay pvc's and frame-relay soft-vc's cannot exceed CIR
overbooking factor times access rate. …
percentInteger32r/w
Constraints:
range: 100-1000
 .1.3.6.1.4.1.9.9.110.1.1.3.1.1

cfaInterworkIfResourceTable

table
.1.3.6.1.4.1.9.9.110.1.2.1 · 1 row entry · 5 columns
Open in standard view 
A table of objects that can be used to view
available and allocated resources on Frame Relay
and FUNI interfaces defined on a Frame Relay Port
Adapter Module (PAM).
          
An unique set of available and allocated resources
are available for the transmit direction (going out
of the interface to the external world), and 
receive direction (coming into the interface from
the external world).
          
These available and allocated resources are available
for every supported Interworking Function service
category.
          
These objects become available as each Frame Relay
and FUNI interface is defined on the device. The
corresponding ifTypes are frameRelayService(44)
and atmFuni(106) respectively.
cfaInterworkIfResourceEntry entry .1.3.6.1.4.1.9.9.110.1.2.1.1
A set of objects that can be used to view
available and allocated resources on Frame Relay
and FUNI interfaces defined on a Frame Relay Port
Adapter Module (PAM).
Indexes
RFC1213-MIBifIndex cfaInterworkIfVcQService
Column Syntax OID
cfaInterworkIfVcQService
The service category of the connection to which this
entry applies.
CfaInterworkServiceCategory
Textual Convention: CfaInterworkServiceCategory Enumeration
Type Values:
1vbrNrt
2abr
3ubr
 .1.3.6.1.4.1.9.9.110.1.2.1.1.1
cfaInterworkIfRxAvailRate
The available bit rate for traffic received on the
Frame Relay interface. This is the bandwidth available
for connections. This value decreases as a
result of setup of a connection requesting non-zero
Committed Informat…
bits-per-secondSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.110.1.2.1.1.2
cfaInterworkIfTxAvailRate
The available bit rate for traffic sent out the
Frame Relay interface. This is the bandwidth available
for connections. This value decreases as a
result of setup of a connection requesting non-zero CIR
in the transmit d…
bits-per-secondSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.110.1.2.1.1.3
cfaInterworkIfRxAllocRate
The allocated bit rate for traffic received on the
Frame Relay interface. This is the bandwidth allocated
to connections. This value increases as a
result of setup of a connection requesting non-zero CIR
in the receive …
bits-per-secondSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.110.1.2.1.1.4
cfaInterworkIfTxAllocRate
The allocated bit rate for traffic sent out the
Frame Relay interface. This is the bandwidth allocated
to connections. This value increases as a
result of setup of a connection requesting non-zero CIR
in the transmit di…
bits-per-secondSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.110.1.2.1.1.5