CISCO-ATM-SWITCH-CUG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
3
Rows
3
Columns
12
.1.3.6.1.4.1.9.9.89.1.1 · 1 row entry · 3 columns
The CUG interlock code alias Table. Entries in this 
table can be created and deleted by setting the 
csCugInterlockCodeRowStatus object to appropriate
values. This table maps the interlock code to an alias name.
Table entries cannot be deleted if the entries in this table are
being used in csCugTable.
csCugInterlockCodeEntry entry .1.3.6.1.4.1.9.9.89.1.1.1
An entry in the cug interlock code table.
Indexes
csCugInterlockCode
Column Syntax OID
csCugInterlockCode
The Address to be aliased.
CsCugInterlockCode
Textual Convention: CsCugInterlockCode OctetString
Type Constraints:
range: 4
range: 24
.1.3.6.1.4.1.9.9.89.1.1.1.1
csCugInterlockCodeAliasName
The alias name for a CUG interlock code.
OctetStringr/w
Constraints:
range: 1-30
.1.3.6.1.4.1.9.9.89.1.1.1.2
csCugInterlockCodeRowStatus
To create, delete a row. Existing rows can be modified/deleted
when the row is active providing this alias is not referenced by any
entries in the csCugTable.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.9.9.89.1.1.1.3
.1.3.6.1.4.1.9.9.89.1.2 · 1 row entry · 4 columns
A table to define an interface as an access interface.
csCugIfEntry entry .1.3.6.1.4.1.9.9.89.1.2.1
An entry in this table must be created in order to enable the
screening of closed user group calls and enable the barring of
transmission of CUG interlock codes across the interface. Closed
user group calls are screened…
Indexes
IF-MIBifIndex
Column Syntax OID
csCugIfAccessEnable
If the value is true, enables CUG service on the interface.
When the value is false, CUG service on the interface will be
disabled and no screening of CUGs will be done.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.9.9.89.1.2.1.1
csCugIfPermitUnknownCugsToUser
This maps to incoming access of the ITU spec. This object takes
effect when csCugIfAccessEnable is true. If the value is true,
allows calls with unknown cug interlock code or non-cug calls to be
forwarded to the user.…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.9.9.89.1.2.1.2
csCugIfPermitUnknownCugsFromUser
This maps to outgoing access of the ITU spec. This object takes
effect when csCugIfAccessEnable is true. If the value is
deny, do not permit calls to other CUGs.
If the value is permitPerCall, use cug index from user a…
Enumerationr/w
Enumerated Values:
1deny
2permitPerCall
3permitPermanently
.1.3.6.1.4.1.9.9.89.1.2.1.3
csCugIfRowStatus
The status of this conceptual row.
The value of the columnar objects in this row may be modified
even while the row status is 'active'.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.9.9.89.1.2.1.4
.1.3.6.1.4.1.9.9.89.1.3 · 1 row entry · 5 columns
A list of Closed User Group (CUG) definitions on the interfaces of 
the switch. Entries in this table may be created and deleted by SNMP.
Each entry represents membership of an interface in a CUG. An 
interface may have several CUGs, but only one 'preferential' CUG.
CUG membership takes effect only when the interface is configured
as an access interface i.e., has an entry in the csCugIfTable and
that entry's csCugIfAccessEnable == true.
csCugEntry entry .1.3.6.1.4.1.9.9.89.1.3.1
An entry identifying an interface's membership in a CUG.
Indexes
IF-MIBifIndex csCugInterlockCode
Column Syntax OID
csCugIndex
This maps to cug index of ITU spec. For each interface,
there is a unique cug index for each interlock code. This
object is valid only when CUGs are supported on a
per-call basis.
Unsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.9.9.89.1.3.1.1
csCugPreferential
Indicates if this is a preferential CUG. A value of false means
non-preferred CUG. There can be at most one preferential CUG on
an interface. When a preferential cug exists, this object has to be
set to false before ano…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.9.9.89.1.3.1.2
csCugDenySameGroupToUser
This applies to members of the same closed user group. This
object maps to incoming-calls-barred in ITU spec. At the
destination interface if this is true and the call was made
by a member of the same CUG, the call wil…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.9.9.89.1.3.1.3
csCugDenySameGroupFromUser
This applies to members of the same closed user group at the
originating interface. This object maps to outgoing-calls-barred
in the ITU specification.

Setting an entry's csCugDenySameGroupFromUser to tr…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.9.9.89.1.3.1.4
csCugRowStatus
The status of this conceptual row.
The value of the columnar objects in this row may be modified
even while the row status is 'active'. Modifications will
affect new calls. Existing calls are not affected.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.9.9.89.1.3.1.5