CISCO-ADAPTER-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
20

adptrTable

table mandatory
.1.3.6.1.4.1.9.5.2.2 · 1 row entry · 15 columns
Open in standard view 
A list of adapter table entries.  The number of entries
is given by adptrNumber.
adptrEntry entry .1.3.6.1.4.1.9.5.2.2.1
An adapter table entry containing information about a
Cisco network adapter card.
Indexes
adptrIndex
Column Syntax OID
adptrIndex mandatory
A unique value for each Cisco adapter card in the
machine. The value ranges between 1 and the value of
adptrNumber. The value for each adapter card must
remain constant at least from one re-initialization
of the entit…
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.9.5.2.2.1.1
adptrType mandatory
The type of adapter card.
Enumeration
Enumerated Values:
1other
2sBusCddi
3sBusFddiSt
4sBusFddi
5mcaCddi
6mcaFddiSt
7mcaFddi
8eisaCddi
10eisaFddi
 .1.3.6.1.4.1.9.5.2.2.1.2
adptrSerialNumber mandatory
The serial number of the adapter card.
Integer32
Constraints:
range: 0-999999999
 .1.3.6.1.4.1.9.5.2.2.1.3
adptrHwHiVersion mandatory
The high part of the hardware version of the adapter
card. For example, if the hardware version is 3.1, the
value of adptrHwHiVersion is 3.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.5.2.2.1.4
adptrHwLoVersion mandatory
The low part of the hardware version of the adapter
card. For example, if the hardware version is 3.1, the
value of adptrHwLoVersion is 1.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.5.2.2.1.5
adptrFwHiVersion mandatory
The high part of the firmware version of the adapter
card. For example, if the firmware version is 3.1, the
value of adptrFwHiVersion is 3.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.5.2.2.1.6
adptrFwLoVersion mandatory
The low part of the firmware version of the adapter
card. For example, if the firmware version is 3.1, the
value of adptrFwLoVersion is 1.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.5.2.2.1.7
adptrSwHiVersion mandatory
The high part of the software version number. For
example, if the software version is 3.1, the value of
adptrSwHiVersion is 3.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.5.2.2.1.8
adptrSwLoVersion mandatory
The low part of the software version number. For
example, if the software version is 3.1, the value of
adptrSwLoVersion is 1.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.5.2.2.1.9
adptrStatus mandatory
The operational status of the adapter card. If the
status is not ok(2), the value of adptrSelfTestResult
gives more detailed information about the adapter card's
failure condition(s).
Enumeration
Enumerated Values:
1other
2ok
3minorFault
4majorFault
 .1.3.6.1.4.1.9.5.2.2.1.10
adptrSelfTestResult mandatory
The result of the adapter card's self test. A zero
indicates that the adapter passed all tests. Bits set
in the result indicate error conditions.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.5.2.2.1.11
adptrDriverHiVersion mandatory
The high part of the driver version number. For
example, if the driver version is 3.1, the value of
adptrDriverHiVersion is 3.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.5.2.2.1.13
adptrDriverLoVersion mandatory
The low part of the driver version number. For
example, if the driver version is 3.1, the value of
adptrDriverLoVersion is 1.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.5.2.2.1.14
adptrMediaType mandatory
The type of physical layer medium dependent interface
on the adapter port(s).
Enumeration
Enumerated Values:
1other
2cddi
3fiber
4tppmd
5mlt3
6sddi
7smf
 .1.3.6.1.4.1.9.5.2.2.1.17
adptrModel mandatory
The manufacturer's model number for the adapter.
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.9.5.2.2.1.18

adptrTrapReceiverTable

table mandatory
.1.3.6.1.4.1.9.5.2.3 · 1 row entry · 3 columns
Open in standard view 
The adapter trap receiver table (0 to 10 entries).
This table lists the addresses of Network Management 
Stations that should receive trap messages from this
adapter when an exception condition occurs.
adptrTrapReceiverEntry entry .1.3.6.1.4.1.9.5.2.3.1
A trap receiver table entry.
Indexes
adptrTrapReceiverAddr
Column Syntax OID
adptrTrapReceiverType mandatory
Setting this object to invalid(2) removes the
corresponding entry from the adptrTrapReceiverTable.
To add a new entry to the adptrTrapReceiverTable, set
the adptrTrapReceiverAddr to an IpAddress which is not
already…
Enumerationr/w
Enumerated Values:
1other
2invalid
 .1.3.6.1.4.1.9.5.2.3.1.1
adptrTrapReceiverAddr mandatory
IP address for trap receiver.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.9.5.2.3.1.2
adptrTrapReceiverComm mandatory
Community string used for trap messages to this trap
receiver.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.9.5.2.3.1.3

adptrCommunityTable

table mandatory
.1.3.6.1.4.1.9.5.2.4 · 1 row entry · 2 columns
Open in standard view 
The adapter community table (4 entries).  This table 
lists community strings and their access levels.  When 
an SNMP message is received by this adapter, the 
community string in the message is compared with this 
table to determine access rights of the sender.
adptrCommunityEntry entry .1.3.6.1.4.1.9.5.2.4.1
A community table entry.
Indexes
adptrCommunityAccess
Column Syntax OID
adptrCommunityAccess mandatory
A value of readWriteAll(4) allows the community to
read and write all objects in the MIB. A value of
readWrite(3) allows the community to read and write all
objects except the adptrCommunityTable, which it cannot
a…
Enumeration
Enumerated Values:
1other
2readOnly
3readWrite
4readWriteAll
 .1.3.6.1.4.1.9.5.2.4.1.1
adptrCommunityString mandatory
Configurable community string with access rights
defined by the value of adptrCommunityAccess.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.9.5.2.4.1.2