CIE1000-POE-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
4
Rows
4
Columns
15
.1.3.6.1.4.1.9.9.832.1.43.1.1.1
·
1 row entry
·
2 columns
This is a table to interface capabilities
Each interface has a set of capability parameters
Indexes
cie1000PoeCapabilitiesInterfaceIfIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
cie1000PoeCapabilitiesInterfaceIfIndex
Logical interface number.
|
CIE1000-TCCIE1000InterfaceIndex Textual Convention: CIE1000-TCCIE1000InterfaceIndex Integer32Type Constraints: range: 0..2147483647 |
.1.3.6.1.4.1.9.9.832.1.43.1.1.1.1.1 |
||||
|
cie1000PoeCapabilitiesInterfacePoE
Indicates whether interface is PoE capable or not.
|
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.9.9.832.1.43.1.1.1.1.2 |
.1.3.6.1.4.1.9.9.832.1.43.1.2.2.1
·
1 row entry
·
3 columns
This is a table to configure PoE configurations for a switch.
Each switch has a set of PoE configurable parameters
Indexes
cie1000PoeConfigSwitchParamSwitchId
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
cie1000PoeConfigSwitchParamSwitchId
User Switch Id.
|
Unsigned32 Constraints: range: 1-16 |
.1.3.6.1.4.1.9.9.832.1.43.1.2.2.1.1.1 |
||||
|
cie1000PoeConfigSwitchParamMaxPower
The Maximum power(in Watt) that the power sourcing equipment(such as
switch) can deliver. |
Integer32r/w Constraints: range: 0-180 |
.1.3.6.1.4.1.9.9.832.1.43.1.2.2.1.1.2 |
||||
|
cie1000PoeConfigSwitchParamCapacitorDetection
Indicates whether switch capacitor detection feature is enabled or not.
|
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.9.9.832.1.43.1.2.2.1.1.3 |
.1.3.6.1.4.1.9.9.832.1.43.1.2.3.1
·
1 row entry
·
4 columns
This is a table to configure PoE configurations for a specific interface.
Each interface has a set of PoE configurable parameters
Indexes
cie1000PoeConfigInterfaceParamIfIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
cie1000PoeConfigInterfaceParamIfIndex
Logical interface number.
|
CIE1000-TCCIE1000InterfaceIndex Textual Convention: CIE1000-TCCIE1000InterfaceIndex Integer32Type Constraints: range: 0..2147483647 |
.1.3.6.1.4.1.9.9.832.1.43.1.2.3.1.1.1 |
||||||
|
cie1000PoeConfigInterfaceParamMode
Set PoE mode or disable PoE feature, two PoE modes are supported. POE:
Enables PoE based on IEEE 802.3af standard, and provides power up to 15.4W(154 deciwatt) of DC power to powered device. When changing to standard mo… |
CIE1000poeModeTyper/w Textual Convention: CIE1000poeModeType EnumerationType Values:
|
.1.3.6.1.4.1.9.9.832.1.43.1.2.3.1.1.2 |
||||||
|
cie1000PoeConfigInterfaceParamPriority
Set port power priority. Priority determines the order in which the
interfaces will receive power. Interfaces with a higher priority will receive power before interfaces with a lower priority. PRIORITY_LOW means lowest … |
CIE1000poePowerPriorityTyper/w Textual Convention: CIE1000poePowerPriorityType EnumerationType Values:
|
.1.3.6.1.4.1.9.9.832.1.43.1.2.3.1.1.3 |
||||||
|
cie1000PoeConfigInterfaceParamMaxPower
Maximum port power(in deciwatt) that can be delivered to remote device.
Maximum allowed values from 0 to 154 deciwatt in POE standard mode, and from 0 to 300 deciwatt in POE plus mode. |
Integer32r/w Constraints: range: 0-300 |
.1.3.6.1.4.1.9.9.832.1.43.1.2.3.1.1.4 |
.1.3.6.1.4.1.9.9.832.1.43.1.3.1
·
1 row entry
·
6 columns
This is a table to Power over Ethernet interface status
Each interface has a set of status parameters
Indexes
cie1000PoeStatusInterfaceIfIndex
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
cie1000PoeStatusInterfaceIfIndex
Logical interface number.
|
CIE1000-TCCIE1000InterfaceIndex Textual Convention: CIE1000-TCCIE1000InterfaceIndex Integer32Type Constraints: range: 0..2147483647 |
.1.3.6.1.4.1.9.9.832.1.43.1.3.1.1.1 |
||||||||||||||||
|
cie1000PoeStatusInterfacePDClass
Powered device(PD) negotiates a power class with sourcing
equipment(PSE) during the time of initial connection, each class have a maximum supported power. Class assigned to PD is based on PD electrical characteristics. … |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.9.9.832.1.43.1.3.1.1.2 |
||||||||||||||||
|
cie1000PoeStatusInterfaceCurrentState
Indicate port status. POWER_BUDGET_EXCEEDED: PoE is turned OFF due to
power budget exceeded on PSE. NO_PD_DETECTED: No PD detected. PD_ON: PSE supplying power to PD through PoE. PD_OVERLOAD: PD consumes more power than … |
CIE1000poeStatusType Textual Convention: CIE1000poeStatusType EnumerationType Values:
|
.1.3.6.1.4.1.9.9.832.1.43.1.3.1.1.3 |
||||||||||||||||
|
cie1000PoeStatusInterfacePowerConsumption
Indicates the power(in deciwatt) that the PD is consuming right now.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.9.9.832.1.43.1.3.1.1.4 |
||||||||||||||||
|
cie1000PoeStatusInterfacePowerReserved
Indicates the power(in deciwatt) that the PD has requested/reserved.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.9.9.832.1.43.1.3.1.1.5 |
||||||||||||||||
|
cie1000PoeStatusInterfaceCurrentConsumption
Indicates the current(in mA) that the PD is consuming right now.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.9.9.832.1.43.1.3.1.1.6 |