A altSwPrimaryPowerSupplyFailure trap signifies that the 
primary power supply failed.

A altSwSlbBkupRealServerDeact trap signifies that the backup real 
server is deactivated because the primary real server has become 
available. One might expect that a altSwSlbRealServerUp trap with the
primary real server specified would preceded this one.
slbCurCfgRealServerIndex is the affected Real Server Number.
The range is from 1 to slbRealServerMaxSize.
slbCurCfgRealServerIpAddr is the IP address of the affected 
Real Server.
slbCurCfgRealServerName is the optional Name given to the 
affected Real Server.

A vadcStateVrrpMaster trap signifies that vADC VRRP state
has been changed to MASTER.

A vadcStateVrrpBackup trap signifies that vADC VRRP state
has been changed to BACKUP

.

agTftpActionStatus notification.

A altSwSlbBkupRealServerActOverflow trap signifies that the backup 
real server is activated because the primary real server has reached 
the maximum allowed connections and is considered to be  is in the 
Overflow state. One would expect an altSwSlbRealServerMaxConnReached 
trap from the Real server that just entered Overflow would preceded  
this one. 
slbCurCfgRealServerIndex is the affected Real Server Number.
The range is from 1 to slbRealServerMaxSize.
slbCurCfgRealServerIpAddr is the IP address of the affected 
Real Server.
slbCurCfgRealServerName is the optional Name given to the 
affected Real Server.

A altSwSlbEnhRealGroupAdvhlUp trap signifies that the real group is
up with advanced health check formula.
slbCurCfgEnhGroupIndex is the affected real server group number.
slbCurCfgEnhGroupName is the optional name given to the affected
real server group.
slbCurCfgEnhGroupHealthCheckFormula is The formula used to state the
actual health of a virtual service.

A altSwSlbEnhRealGroupAdvhlUp trap signifies that the real group is
down with advanced health check formula.
slbCurCfgEnhGroupIndex is the affected real server group number.
slbCurCfgEnhGroupName is the optional name given to the affected
real server group.
slbCurCfgEnhGroupHealthCheckFormula is The formula used to state the
actual health of a virtual service.

A altSwSlbBkupRealServerDeactOverflow trap signifies that the backup 
real server is deactivated because the primary real server is no 
longer in Overflow. The number of connections to the real server has 
fallen below the maximum allowed. The backup/overflow server is no 
longer needed.
slbCurCfgRealServerIndex is the affected Real Server Number.
The range is from 1 to slbRealServerMaxSize.
slbCurCfgRealServerIpAddr is the IP address of the affected 
Real Server.
slbCurCfgRealServerName is the optional Name given to the 
affected Real Server.

A altSwSlbEnhBkupGroupAct trap signifies that the backup group is enabled
while primary group is going down with advanced health check formula.
slbCurCfgEnhGroupIndex is the affected real server group number.
slbCurCfgEnhGroupName is the optional name given to the affected
real server group.
slbCurCfgEnhGroupIndex is the primary real group number adding in the
trap message.

A altSwSlbEnhBkupGroupDeact trap signifies that the backup group is disabled
while primary group is getting up with advanced health check formula.
slbCurCfgEnhGroupIndex is the affected real server group number.
slbCurCfgEnhGroupName is the optional name given to the affected
real server group.
slbCurCfgEnhGroupIndex is the primary real group number adding in the
trap message.

A altSwSlbEnhVirtServerServicesUp trap signifies that the service ports
of the virtual server is up and operational.
slbCurCfgEnhVirtServerIndex is the affected Virtual Server Number.
The range is from 1 to the value return from slbVirtServerTableMaxSize.
slbCurCfgEnhVirtServerIpAddress is the IP address of the affected
Virtual Server.
slbCurCfgEnhVirtServerVname is the optional Name given to the affected
Virtal Server.

A altSwSlbEnhVirtServerServicesDown trap signifies that the service ports
of the Virtual server is down and out of service.
slbCurCfgEnhVirtServerIndex is the affected Virtual Server Number.
The range is from 1 to the value return from slbVirtServerTableMaxSize.
slbCurCfgVirtServerIpAddress is the IP address of the affected
Virtual Server.
slbCurCfgEnhVirtServerVname is the optional Name given to the affected
Virtual Server.

A altSwTputAverage trap signifies device has reached the throughput threshold.
altSwTrapDisplayString specifies the current throughput and average throughput in last 24 hours.

A altSwSlbEnhRealServerDown trap signifies that the real server has gone
down and is out of service.
slbCurCfgEnhRealServerIndex is the affected Real Server alphanumeric index.
slbCurCfgEnhRealServerIpAddr is the IP address of the affected
Real Server.
slbCurCfgEnhRealServerName is the optional Name given to the
affected Real Server.

A altSwSlbEnhRealServerMaxConnReached trap signifies that the real
server has reached maximum connections. The Real server will not be
sent any more traffic from the switch until the number of connections
drops below the maximum. If a backup server has been specified, it
will be used to service additional requests, which is referred to as
an Overflow server.
slbCurCfgEnhRealServerIndex is the affected Real Server alphanumeric index.
slbCurCfgEnhRealServerIpAddr is the IP address of the affected
Real Server.
slbCurCfgEnhRealServerName is the optional Name given to the
affected Real Server.

A altSwSlbEnhBkupRealServerAct trap signifies that this backup real
server has been activated because the Real server that it backs up
went down.One might expect that a altSwSlbEnhRealServerDown trap with
the primary real server specified would preceded this one.
slbCurCfgEnhRealServerIndex is the affected Real Server alphanumeric index.
slbCurCfgEnhRealServerIpAddr is the IP address of the affected
Real Server.
slbCurCfgEnhRealServerName is the optional Name given to the
affected Real Server.

A altSwSlbEnhBkupRealServerDeact trap signifies that the backup real
server is deactivated because the primary real server has become
available. One might expect that a altSwSlbEnhRealServerUp trap with the
primary real server specified would preceded this one.
slbCurCfgEnhRealServerIndex is the affected Real Server alphanumeric index.
slbCurCfgEnhRealServerIpAddr is the IP address of the affected
Real Server.
slbCurCfgEnhRealServerName is the optional Name given to the
affected Real Server.

A altSwSlbEnhBkupRealServerActOverflow trap signifies that the backup
real server is activated because the primary real server has reached
the maximum allowed connections and is considered to be  is in the
Overflow state. One would expect an altSwSlbEnhRealServerMaxConnReached
trap from the Real server that just entered Overflow would preceded
this one.
slbCurCfgEnhRealServerIndex is the affected Real Server alphanumeric index.
slbCurCfgEnhRealServerIpAddr is the IP address of the affected
Real Server.
slbCurCfgEnhRealServerName is the optional Name given to the
affected Real Server.

A altSwfltFilterFired trap signifies that the packet received on a 
switch port matches the filter rule.
fltCurCfgIndx is the affected filter index, referenced in 
fltCurCfgTable. The range is from 1 to fltCfgTableMaxSize.
fltCurCfgPortIndx is the affected port index, referenced in 
fltCurCfgPortTable. The range is from 1 to agPortTableMaxEnt.

A altSwSlbEnhBkupRealServerDeactOverflow trap signifies that the backup
real server is deactivated because the primary real server is no
longer in Overflow. The number of connections to the real server has
fallen below the maximum allowed. The backup/overflow server is no
longer needed.
slbCurCfgEnhRealServerIndex is the affected Real Server alphanumeric index.
slbCurCfgEnhRealServerIpAddr is the IP address of the affected
Real Server.
slbCurCfgEnhRealServerName is the optional Name given to the
affected Real Server.

A altSwSlbEnhRealServerServiceUp trap signifies that the service port of
the real server is up and operational.
slbCurCfgEnhRealServerIndex is the affected Real Server alphanumeric index.
slbCurCfgEnhRealServerIpAddr is the IP address of the affected
Real Server.
slbCurCfgEnhRealServerName is the optional Name given to the affected
Real Server.
slbCurCfgEnhVirtualServiceRealPort referenced in
slbCurCfgEnhVirtServicesTable. This is the layer 4 real port number of
the service.

A altSwSlbEnhRealServerServiceDown trap signifies that the service port
of the real server is down and out of service.
slbCurCfgEnhRealServerIndex is the affected Real Server alphanumeric index.
slbCurCfgEnhRealServerIpAddr is the IP address of the affected
Real Server.
slbCurCfgEnhRealServerName is the optional Name given to the affected
Real Server.
slbCurCfgEnhVirtualServiceRealPort referenced in
slbCurCfgEnhVirtServicesTable.
This is the layer 4 real port number of the service.

A altSwSlbEnhRemoteRealServerUp trap signifies that the remote
real server is up.
slbCurCfgEnhRealServerIndex is the affected real server alphanumeric index.
slbCurCfgEnhRealServerIpAddr is the IP address of the affected
real server.
slbCurCfgEnhRealServerName is the optional name given to the
affected real server.

A altSwSlbEnhRemoteRealServerDown trap signifies that them remote
real server has gone down and is out of service.
slbCurCfgEnhRealServerIndex is the affected real server alphanumeric index.
slbCurCfgEnhRealServerIpAddr is the IP address of the affected
real server.
slbCurCfgEnhRealServerName is the optional name given to the
affected real server.

A altSwSlbEnhRealServerOperDis trap signifies that the real server is
disabled operationally. The real server will not be sent any traffic
from the switch until the real server enabled operationally.
slbCurCfgEnhRealServerIndex is the affected real server alphanumeric index.
slbCurCfgEnhRealServerIpAddr is the IP address of the affected
real server.
slbCurCfgEnhRealServerName is the optional name given to the
affected real server.

A altSwSlbEnhRealServerOperEna trap signifies that the real server is
enabled operationally. The real server will be send traffic again.
slbCurCfgEnhRealServerIndex is the affected real server alphanumeric index.
slbCurCfgEnhRealServerIpAddr is the IP address of the affected
real server.
slbCurCfgEnhRealServerName is the optional name given to the
affected real server.

A vadcDelete trap signifies that vadc 
has been deleted.

A vadcCapUnit trap signifies change in
capacity units of vadc.

A vadcLic trap generated when feature 
license is enabled for vadc.

A altSwSlbRealServerServiceUp trap signifies that the service port of
the real server is up and operational.
slbCurCfgRealServerIndex is the affected Real Server Number.
The range is from 1 to the value return from slbRealServerMaxSize.
slbCurCfgRealServerIpAddr is the IP address of the affected 
Real Server.
slbCurCfgRealServerName is the optional Name given to the affected 
Real Server.
slbCurCfgVirtualServiceRealPort referenced in
slbCurCfgVirtServicesTable. This is the layer 4 real port number of 
the service.

A vadcThrupt trap generated when vADC 
throughput limit is changed.

A vadcSsl trap generated when vADC
SSL limit is changed.

A vadcComp trap generated when vADC
compression limit is changed.

APM license watermark.

APM license overflow.

A altSwSlbEnhRealServerUp trap signifies that the real server
(which had gone down )is back up and operational now.
slbCurCfgEnhRealServerIndex is the affected Real Server alphanumeric index.
slbCurCfgEnhRealServerIpAddr is the IP address of the affected
Real Server.
slbCurCfgEnhRealServerName is the optional Name given to the
affected Real Server.

The altSwVrrpNewInit trap indicates that the sending agent has
transitioned to 'INIT' state.
vrrpCurCfgVirtRtrIndx is the VRRP virtual router table index
referenced in vrrpCurCfgVirtRtrTable. The range is from 1 to
vrrpVirtRtrTableMaxSize.
vrrpCurCfgVirtRtrAddr is the VRRP virtual router IP address.

The altSwVrrpVsrNewInit trap indicates that the sending agent
configured as VSR transitioned to 'INIT' state.
vrrpCurCfgVirtRtrIndx is the VRRP virtual router table index
referenced in vrrpCurCfgVirtRtrTable. The range is from 1 to
vrrpVirtRtrTableMaxSize.
vrrpCurCfgVirtRtrAddr is the VRRP virtual router IP address.

The altSwVrrpNewHoldoff trap indicates that the sending agent has
transitioned to 'HOLDOFF' state.
vrrpCurCfgVirtRtrIndx is the VRRP virtual router table index
referenced in vrrpCurCfgVirtRtrTable. The range is from 1 to
vrrpVirtRtrTableMaxSize.
vrrpCurCfgVirtRtrAddr is the VRRP virtual router IP address.

The altSwVrrpVsrNewHoldoff trap indicates that the sending agent
configured as VSR transitioned to 'HOLDOFF' state.
vrrpCurCfgVirtRtrIndx is the VRRP virtual router table index
referenced in vrrpCurCfgVirtRtrTable. The range is from 1 to
vrrpVirtRtrTableMaxSize.
vrrpCurCfgVirtRtrAddr is the VRRP virtual router IP address.

A altSwSlbRealServerServiceDown trap signifies that the service port 
of the real server is down and out of service.
slbCurCfgRealServerIndex is the affected Real Server Number.
The range is from 1 to the value return from slbRealServerMaxSize.
slbCurCfgRealServerIpAddr is the IP address of the affected 
Real Server.
slbCurCfgRealServerName is the optional Name given to the affected 
Real Server.
slbCurCfgVirtualServiceRealPort referenced in 
slbCurCfgVirtServicesTable.  
This is the layer 4 real port number of the service.

WAF license watermark.

WAF license overflow.

HA Service is in Init

HA Service is in Holdoff

HA Service is in Master

HA Service is in Backup

A HighSpCpuTrap trap is sent when at least one of the SP CPU utilization has reached above configured SP alert threshold value

The altSwVrrpNewMaster trap indicates that the sending agent has 
transitioned to 'Master' state.
vrrpCurCfgVirtRtrIndx is the VRRP virtual router table index 
referenced in vrrpCurCfgVirtRtrTable. The range is from 1 to 
vrrpVirtRtrTableMaxSize.
vrrpCurCfgVirtRtrAddr is the VRRP virtual router IP address.

A HighSpCpuClearTrap trap is sent when all SP CPU Utilizations have fallen below configured SP alert threshold value

A HighMpCpUTrap trap is sent when the MP CPU utilization has reached above configured MP alert threshold value

A HighMPCPUClearTrap trap is sent when the MP CPU Utilization have fallen below configured MP alert threshold value

Appwall is UP

Appwall is Down

The altSwVrrpNewBackup trap indicates that the sending agent has 
transitioned to 'Backup' state.
vrrpCurCfgVirtRtrIndx is the VRRP virtual router table index 
referenced in vrrpCurCfgVirtRtrTable. The range is from 1 to 
vrrpVirtRtrTableMaxSize.
vrrpCurCfgVirtRtrAddr is the VRRP virtual router IP address.

Memory pressure activated.

Memory pressure de-activated.

Memory pressure warning threshold crossed.

Memory pressure warning threshold crossed back.

Dynamic Data Store is at critical utilization

Dynamic Data Store is at high utilization

Dynamic Data Store is at normal utilization

A altSwVrrpAuthFailure trap signifies that a packet has been received
from a router whose authentication key or authentication type 
conflicts with this router's authentication key or authentication 
type. Implementation of this trap is optional.
vrrpCurCfgIfIndx is the VRRP interface index. This is equivalent to 
ifIndex in RFC 1213 mib. The range is from 1 to vrrpIfTableMaxSize.
vrrpCurCfgIfPasswd is the password for authentication. It is a
DisplayString of 0 to 7 characters.

The altSwfilterGWFailurePIP trap indicates that a packet that 
was sent was cought on a filter with no PIP configured.

The altSwfilterGWFailureDest trap indicates that a packet that 
was sent was cought on a filter with no rtproxy and AppShape++
host script configured.

DoS Attack Status.

A altSwTputAverage trap in CEF format  signifies device has reached the throughput threshold.
altSwTrapDisplayString specifies the current throughput and average throughput in last 24 hours.

Service Activation on configured APM Server succeeded.

Service Activation on configured APM Server failed.

A highSpCpuTrap trap in CEF fromat is sent when at least one of the SP CPU utilization has reached above configured SP alert threshold value

A highSpCpuClearTrap trap in CEF fromat is sent when all SP CPU Utilizations have fallen below configured SP alert threshold value

A highMpCpUTrap trap in CEF fromat is sent when the MP CPU utilization has reached above configured MP alert threshold value

A highMPCPUClearTrap trap in CEF fromat is sent when the MP CPU Utilization have fallen below configured MP alert threshold value

A altSwLoginFailure trap signifies that someone failed to enter a 
valid username/password combination. 
altSwTrapDisplayString specifies whether the login attempt was from 
CONSOLE or TELNET. In case of TELNET login it also specifies the IP 
address of the host from which the attempt was made.

A HighProxTableTrap trap is sent when the proximity table entry has reached above configured proximity threshold value

A FullProxTableTrap trap is sent when the proximity table entry becomes full

A LowProxTableTrap trap is sent when the proximity table entry have fallen below configured proximity threshold value

A rsEnhMaxBwTrap signifies that the real server has reached configured 
bandwidth limit. The Real server will not be sent any more traffic from 
the switch until the bandwidth comes down below the configured limit. If 
a backup server has been specified, it will be used to service additional 
requests, which is referred to as an Overflow server. 
slbCurCfgEnhRealServerIndex is the affected Real Server alphanumeric index.
slbCurCfgEnhRealServerIpAddr is the IP address of the affected Real Server.
slbCurCfgEnhRealServerName is the optional Name given to the affected Real 
Server.

A crossThresholdTrapCef trap in CEF fromat is sent when the current BW value crosses the BW threshold defined

A crossThresholdTrapCef trap in CEF fromat is sent when the current PPS value crosses the PPS threshold defined

A crossThresholdTrapCef trap in CEF fromat is sent when the current CPS value crosses the CPS threshold defined

A crossThresholdTrapCef trap in CEF fromat is sent when the current CEC value crosses the CEC threshold defined

A crossThresholdTrapCef trap in CEF fromat is sent when the current BW value ratio crosses the BW predefined percentage

A altSwDefGwUp trap signifies that the default gateway is alive. 
ipCurCfgGwIndex is the index of the Gateway in ipCurCfgGwTable.
The range for ipCurCfgGwIndex is from 1 to ipGatewayTableMax.
ipCurCfgGwAddr is the IP address of the default gateway.

A altSwSlbSynAttack trap signifies that a SYN attack has been 
detected.
altSwTrapRate specifies the number of new half-open sessions per 
second.

A crossThresholdTrapCef trap in CEF fromat is sent when the current PPS value ratio crosses the PPS predefined percentage

A crossThresholdTrapCef trap in CEF fromat is sent when the current CPS value ratio crosses the CPS predefined percentage

A crossThresholdTrapCef trap in CEF fromat is sent when the current CEC value ratio crosses the CEC predefined percentage

A crossThresholdTrapCef trap in CEF fromat is sent when the current CEC value ratio crosses the CEC predefined percentage

A HighLatencyThresholdTrap in CEF format is sent when the ratio of current average latency to  the last week average latency is above configured latency threshold in security policy for three consecutive times

A HighLatencyTrap in CEF format is sent when current average latency is above configured latency in security policy for three consecutive times

Memory handle recommendation

A altSwSlbEnhVirtSpecificServiceUp trap signifies that the specific service of
a virtual server (VIP) is now up and available.
slbCurCfgEnhVirtServerIndex is the affected Virtual Server Number.
 The range is from 1 to the value return from slbVirtServerTableMaxSize.
slbCurCfgEnhVirtServerIpAddress is the IP address of the affected
Virtual Server. In case of Ipv6, this field corresponds to slbCurCfgEnhVirtServerIpv6Addr.
slbCurCfgEnhVirtServApplicationType is the application name.
slbCurCfgEnhVirtServiceVirtPort referenced in
slbCurCfgEnhVirtServicesTable. This is the layer 4 port number of
the service on which VIP is listening.

A altSwTcpHoldDown trap signifies that new TCP connection requests
from a particular client will be blocked for a pre-determined amount
of time since the rate of new TCP connections from that client has
reached a pre-determined threshold. 
The fltCurCfgSrcIp is the client source IP address for which new TCP 
connection requests will be blocked. 
The altSwTrapRate specifies the amount of time in minutes that the 
particular client will be blocked.

A altSwSlbEnhVirtSpecificServiceDown trap signifies that the specific service of
a virtual server (VIP) is now down and no longer available.
slbCurCfgEnhVirtServerIndex is the affected Virtual Server Number.
The range is from 1 to the value return from slbVirtServerTableMaxSize.
slbCurCfgEnhVirtServerIpAddress is the IP address of the affected
Virtual Server. In case of Ipv6, this field corresponds to slbCurCfgEnhVirtServerIpv6Addr.
slbCurCfgEnhVirtServApplicationType is the application name.
slbCurCfgEnhVirtServiceVirtPort referenced in
slbCurCfgEnhVirtServicesTable. This is the layer 4 port number of
the service on which VIP is listening.

SSL Inspection certificates cache is full.
Please consider increasing its size.

altSwBulkRevertApply trap signifies that reverts unsaved changes.

A altSwSessSyncTrap trap signifies that session sync
has finished.

A altSwSpCpuPressureActivatedTrap trap indicates that the SP CPU Usage Threshold
has exceeded the defined SP CPU Pressure On Threshold.

A altSwSpCpuPressureActivatedTrap trap indicates that the SP CPU Usage Threshold
has fallen below the defined SP CPU Pressure Off Threshold.

This trap is sent when NTP timezone is not defined.

This trap is sent when NTP communication fails.

A altSwSlbEnhRealServerOperDisGroup trap signifies that the real server is
disabled operationally in the group. The real server will not be sent any traffic
from the switch until the real server enabled operationally.
slbCurCfgEnhRealServerIndex is the affected real server alphanumeric index.
slbCurCfgEnhRealServerIpAddr is the IP address of the affected
real server.
slbCurCfgEnhRealServerName is the optional name given to the
affected real server.
slbCurCfgEnhGroupIndex is the affected group alphanumeric index.

A altSwSlbEnhRealServerOperEna trap signifies that the real server is
enabled operationally in the group. The real server will be send traffic again.
slbCurCfgEnhRealServerIndex is the affected real server alphanumeric index.
slbCurCfgEnhRealServerIpAddr is the IP address of the affected
real server.
slbCurCfgEnhRealServerName is the optional name given to the
affected real server.
slbCurCfgEnhGroupIndex is the affected group alphanumeric index.

A altSwTempExceedThreshold trap signifies that the
switch temperature has exceeded maximum safety limits. 
altSwTrapDisplayString specifies the sensor, the current sensor 
temperature and the threshold for the particular sensor.

<OCSP-hostname> is not responding.

<OCSP-hostname> is back up

A altSwSlbSessAttack trap signifies that a SLB attack has been 
detected.
altSwTrapRate specifies the number of new sessions per second.

A altSwFanFailure trap signifies that a fan failure has occured.

A altSwSlbVirtServerServicesUp trap signifies that the service ports
of the virtual server is up and operational.
slbCurCfgVirtServerIndex is the affected Virtual Server Number.
The range is from 1 to the value return from slbVirtServerTableMaxSize.
slbCurCfgVirtServerIpAddress is the IP address of the affected
Virtual Server.
slbCurCfgVirtServerVname is the optional Name given to the affected
Virtal Server.

A altSwSlbVirtServerServicesDown trap signifies that the service ports
of the Virtual server is down and out of service.
slbCurCfgVirtServerIndex is the affected Virtual Server Number.
The range is from 1 to the value return from slbVirtServerTableMaxSize.
slbCurCfgVirtServerIpAddress is the IP address of the affected
Virtual Server.
slbCurCfgVirtServerVname is the optional Name given to the affected
Virtual Server.

A altSwSlbRealGroupAdvhlUp trap signifies that the real group is
up with advanced health check formula.
slbCurCfgGroupIndex is the affected real server group number.
slbCurCfgGroupName is the optional name given to the affected
real server group.
slbCurCfgGroupHealthCheckFormula is The formula used to state the
actual health of a virtual service.

A altSwSlbRealGroupAdvhlDown trap signifies that the real group is
down with advanced health check formula.
slbCurCfgGroupIndex is the affected real server group number.
slbCurCfgGroupName is the optional name given to the affected
real server group.
slbCurCfgGroupHealthCheckFormula is The formula used to state the
actual health of a virtual service.

A altSwSlbBkupGroupAct trap signifies that the backup group is enabled
while primary group is going down with advanced health check formula.
slbCurCfgGroupIndex is the affected real server group number.
slbCurCfgGroupName is the optional name given to the affected
real server group.
slbCurCfgGroupIndex is the primary real group number adding in the
trap message.

A altSwDefGwDown trap signifies that the default gateway is down.
ipCurCfgGwIndex is the index of the Gateway in ipCurCfgGwTable. 
The range for ipCurCfgGwIndex is from 1 to ipGatewayTableMax.
ipCurCfgGwAddr is the IP address of the default gateway.

A altSwSlbBkupGroupDeact trap signifies that the backup group is disabled
while primary group is getting up with advanced health check formula.
slbCurCfgGroupIndex is the affected real server group number.
slbCurCfgGroupName is the optional name given to the affected
real server group.
slbCurCfgGroupIndex is the primary real group number adding in the
trap message.

A altSwSlbRemoteRealServerUp trap signifies that the remote
real server is up.
slbCurCfgRealServerIndex is the affected real server number.
The range is from 1 to slbRealServerMaxSize.
slbCurCfgRealServerIpAddr is the IP address of the affected
real server.
slbCurCfgRealServerName is the optional name given to the
affected real server.

A altSwSlbRemoteRealServerDown trap signifies that them remote
real server has gone down and is out of service.
slbCurCfgRealServerIndex is the affected real server number.
The range is from 1 to slbRealServerMaxSize.
slbCurCfgRealServerIpAddr is the IP address of the affected
real server.
slbCurCfgRealServerName is the optional name given to the
affected real server.

A altSwSlbRealServerOperDis trap signifies that the real server is
disabled operationally. The real server will not be sent any traffic
from the switch until the real server enabled operationally.
slbCurCfgRealServerIndex is the affected real server number.
The range is from 1 to slbRealServerMaxSize.
slbCurCfgRealServerIpAddr is the IP address of the affected
real server.
slbCurCfgRealServerName is the optional name given to the
affected real server.

A altSwSlbRealServerOperEna trap signifies that the real server is
enabled operationally. The real server will be send traffic again.
slbCurCfgRealServerIndex is the affected real server number.
The range is from 1 to slbRealServerMaxSize.
slbCurCfgRealServerIpAddr is the IP address of the affected
real server.
slbCurCfgRealServerName is the optional name given to the
affected real server.

A altSwIfcVlanDown trap signifies that all the interfaces in that 
vlan either disabled or moved to different vlan.
vlanCurCfgVlanId is the affected vlan number.
vlanCurCfgVlanName is the optional name given to the affected vlan.

A altSwPortVlanDown trap signifies that all the ports either down 
or moved to different vlan and interfaces are down in that vlan.
vlanCurCfgVlanId is the affected vlan number.
vlanCurCfgVlanName is the optional name given to the affected vlan.

A altSwIfcVlanUp trap signifies that interfaces are available for
this vlan.
vlanCurCfgVlanId is the affected vlan number.
vlanCurCfgVlanName is the optional name given to the affected vlan.

A altSwPortVlanUp trap signifies that physical ports and interfaces
are available for this  vlan.
vlanCurCfgVlanId is the affected vlan number.
vlanCurCfgVlanName is the optional name given to the affected vlan.

A altSwBulkApply trap signifies that new configuration
has been applied.

A altSwDefGwInService trap signifies that the default gateway is
up and in service. 
ipCurCfgGwIndex is the index of the Gateway in ipCurCfgGwTable. 
The range for ipCurCfgGwIndex is from 1 to ipGatewayTableMax. 
ipCurCfgGwAddr is the IP address of the default gateway.

Sent whenever the temperature changes back to normal.

Sent whenever the temperature changes to high.

Sent whenever the temperature becomes critical.

This warning trap is sent when a power supply becomes inactive
on a dual power supply device.

This info trap is sent when a power supply changes state from
inactive to active on a dual power supply device.

Sent whenever the throughput reaches threshold value.

Sent whenever the throughput exceeds threshold value.

No compression hardware was detected during boot-up.

A altSwDefGwNotInService trap signifies that the default gateway 
is alive but not in service. 
ipCurCfgGwIndex is the index of the Gateway in ipCurCfgGwTable. 
The range for ipCurCfgGwIndex is from 1 to ipGatewayTableMax. 
ipCurCfgGwAddr is the IP address of the default gateway.

No SSL acceleration chip was detected during boot-up.

User <user-name> has logged in via SSH console.

Temporary limitation of maximum number of connections due to memory limitation has stopped.

Temporarily limiting caching due to critical cache space shortage.

Allocated cache space has reached 80%.

Allocated cache space is below 80%.

80% of logging disk space was reached.

The device is near full memory capacity <% memory usage>. Temporarily limiting maximum number of connections.

A altSwSlbRealServerUp trap signifies that the real server 
(which had gone down )is back up and operational now.
slbCurCfgRealServerIndex is the affected Real Server Number.
The range is from 1 to slbRealServerMaxSize.
slbCurCfgRealServerIpAddr is the IP address of the affected 
Real Server.
slbCurCfgRealServerName is the optional Name given to the 
affected Real Server.

Configuration Protection mechanism was initiated.

An Error occurred while loading %s certificate key to HSM module. Check HSM management authorization and retry.

: Hardware compression card detected. Hardware compression capabilities will be enabled.

The HSM support engine is not detected as running. Reboot machine and contact Radware support if it fails to help.

SSL Acceleration card <nCipher/Cavium/Broadcom> detected.

Failed to connect to OCSP server <OCSP-hostname> to verify certificate validity. Certificates will be rejected until connection is reestablished.

Failed to verify OCSP response. Certificate will be rejected.

Failed to query <OCSP-hostname> OCSP server for certificate validity. Certificate will be rejected.

Certificate was revoked.

CRL next update time not specified correctly. CRL updates may not occur until corrected.

A altSwSlbRealServerDown trap signifies that the real server has gone
down and is out of service.
slbCurCfgRealServerIndex is the affected Real Server Number.
The range is from 1 to slbRealServerMaxSize.
slbCurCfgRealServerIpAddr is the IP address of the affected 
Real Server.
slbCurCfgRealServerName is the optional Name given to the 
affected Real Server.

: CRL has expired. Certificates will be accepted during prolongation period and rejected after it until CRL is updated.

Server Certificate will expire in X days.

Compression disable due to memory limit.

Compression enable after memory limit.

compression license overflow.

SSL Cps license overflow.

TSL validation failure.

TSL OCSP certification revoked.

TSL OCSP certification unknown.

TSL signature node missing.

A altSwSlbRealServerMaxConnReached trap signifies that the real 
server has reached maximum connections. The Real server will not be 
sent any more traffic from the switch until the number of connections
drops below the maximum. If a backup server has been specified, it 
will be used to service additional requests, which is referred to as 
an Overflow server.
slbCurCfgRealServerIndex is the affected Real Server Number.
The range is from 1 to slbRealServerMaxSize.
slbCurCfgRealServerIpAddr is the IP address of the affected 
Real Server.
slbCurCfgRealServerName is the optional Name given to the 
affected Real Server.

TSL signature validation failure.

TSL new sequence number less than existing.

TSL next update in the past.

TSL next update over 30 days.

TSL oCSP timing error field.

TSL invalid OCSP signing algorithm.

TSL fetcher fetching error.

TSL fetcher signature error.

TSL fetcher OCSP error.

TSL Fetcher XML parsing error.

A altSwSlbBkupRealServerAct trap signifies that this backup real 
server has been activated because the Real server that it backs up 
went down.One might expect that a altSwSlbRealServerDown trap with 
the primary real server specified would preceded this one.
slbCurCfgRealServerIndex is the affected Real Server Number.
The range is from 1 to slbRealServerMaxSize.
slbCurCfgRealServerIpAddr is the IP address of the affected 
Real Server.
slbCurCfgRealServerName is the optional Name given to the 
affected Real Server.

TSL fetcher identical sequence number.

TSL fetching done.

SSL CPS licence watermark.

Compression license watermark.

PIP allocation failed

Config update to Application service engine failed

The altSwVrrpVsrNewMaster trap indicates that the sending agent
configured as VSR has transitioned to 'Master' state.
vrrpCurCfgVirtRtrIndx is the VRRP virtual router table index 
referenced in vrrpCurCfgVirtRtrTable. The range is from 1 to 
vrrpVirtRtrTableMaxSize.
vrrpCurCfgVirtRtrAddr is the VRRP virtual router IP address.

The altSwVrrpVsrNewBackup trap indicates that the sending agent
configured as VSR has transitioned to 'Backup' state.
vrrpCurCfgVirtRtrIndx is the VRRP virtual router table index 
referenced in vrrpCurCfgVirtRtrTable. The range is from 1 to 
vrrpVirtRtrTableMaxSize.
vrrpCurCfgVirtRtrAddr is the VRRP virtual router IP address.

A vadcStateChange trap signifies that the vADC state
has been changed.