CENTRECOM-VLAN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
18

atiVlanIfTable

table
.1.3.6.1.4.1.207.8.12.2.4.1.2 · 1 row entry · 5 columns
Open in standard view 
This table lists VLAN interfaces that exist within
a device.  A single entry exists in this list for each
VLAN interface in the system.  A VLAN interface may
be created, destroyed and/or mapped to a globally identified
vlan.
atiVlanIfEntry entry .1.3.6.1.4.1.207.8.12.2.4.1.2.1
An individual VLAN interface entry. When an NMS wishes
to create a new entry in this table, it must obtain a
non-zero index from the atiNextAvailableVirtIfIndex
object. Row creation in this table will fail if the
cho…
Indexes
atiVlanIfIndex
Column Syntax OID
atiVlanIfIndex
The index value of this row and the vlan's ifIndex in the
ifTable. The NMS obtains the index value for this row by
reading the atiNextAvailableVirtIfIndex object.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.12.2.4.1.2.1.1
atiVlanIfDescr
This is a description of the VLAN interface.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.207.8.12.2.4.1.2.1.2
atiVlanIfType
The VLAN interface type.
AtiSwitchVlanTyper/w
Textual Convention: AtiSwitchVlanType Enumeration
Type Values:
1vlanLayer2
 .1.3.6.1.4.1.207.8.12.2.4.1.2.1.3
atiVlanIfGlobalIdentifier
An administratively assigned global VLAN identifier.

The binding between a global identifier and a VLAN
interface can be created or removed. To create a binding
an NMS must write a non-zero value to thi…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.207.8.12.2.4.1.2.1.4
atiVlanIfStatus
The status column for this VLAN interface.
This OBJECT can be set to:

active(1)
createAndGo(4)
createAndWait(5)
destroy(6)

The following values may be read:
active(1)
no…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.207.8.12.2.4.1.2.1.6

atiVlanEncapsIfTable

table
.1.3.6.1.4.1.207.8.12.2.4.3.1 · 1 row entry · 4 columns
Open in standard view 
This table lists VLAN encapsulation interfaces that
exist within a device.  A single entry exists in this
list for each VLAN encapsulation interface in the
system.  A VLAN encapsulation interface may be created
or destroyed.
atiVlanEncapsIfEntry entry .1.3.6.1.4.1.207.8.12.2.4.3.1.1
An individual VLAN encapsulation interface entry.
When an NMS wishes to create a new entry in this table,
it must obtain a non-zero index from the
atiNextAvailableVirtIfIndex object. Row creation in
this table will fa…
Indexes
atiVlanEncapsIfIndex
Column Syntax OID
atiVlanEncapsIfIndex
The index value of this row and the encapsulation
interface's ifIndex in the ifTable. The NMS obtains
the index value used for creating a row in this table
by reading the atiNextAvailableVirtIfIndex object.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.12.2.4.3.1.1.1
atiVlanEncapsIfType
The encapsulation algorithm used when encapsulating
packets transmitted, or de-encapsulating packets
received through this interface.
AtiSwitchVlanEncapsTyper/w
Textual Convention: AtiSwitchVlanEncapsType Enumeration
Type Values:
2vlanEncaps8021q
 .1.3.6.1.4.1.207.8.12.2.4.3.1.1.2
atiVlanEncapsIfTag
The tag used when encapsulating packets transmitted,
or de-encapsulating packets received through this
interface.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.12.2.4.3.1.1.3
atiVlanEncapsIfStatus
The row status for this VLAN encapsulation interface.

This OBJECT can be set to:

active(1)
createAndGo(4)
createAndWait(5)
destroy(6)

The following values may be read:
…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.207.8.12.2.4.3.1.1.4

atiVlanProtocolTable

table
.1.3.6.1.4.1.207.8.12.2.4.5.1 · 1 row entry · 6 columns
Open in standard view 
Table of defined combinations of protocol IDs 
that make up one protocol definition name. 
All members of one protocol definition share 
the same atiVlanProtocolIndex. A given 
protocol ID may appear in the definition of 
just one protocol definition. This table will
typically contain some default entries for
popular protocols.
atiVlanProtocolEntry entry .1.3.6.1.4.1.207.8.12.2.4.5.1.1
One member protocol ID of a protocol definition.
Indexes
atiVlanProtocolIndex atiVlanProtocolIdIndex
Column Syntax OID
atiVlanProtocolIndex
An index representing a protocol grouping of
protocol ID values. A limited number of
protocol groupings may be defined (up to 7).
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.207.8.12.2.4.5.1.1.1
atiVlanProtocolIdIndex
An index representing a particular protocol ID
within a protocol grouping. A limited number of
protocol IDs may be defined per
atiVlanProtocolIndex (up to 6).
Integer32r/w
Constraints:
range: 0-6
 .1.3.6.1.4.1.207.8.12.2.4.5.1.1.2
atiVlanProtocolName
A human-readable string representing this protocol.
This string should be the same for all entries
sharing a given atiVlanProtocolIndex.
A atiVlanProtocolEntry with
atiVlanProtocolName of ANY represents a match
on al…
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.207.8.12.2.4.5.1.1.3
atiVlanProtocolDllEncapsType
Represents the type of data-link encapsulation
in which the atiVlanProtocolId protocol ID
is carried. The value any(1) is used to indicate
a wildcard and matches all encapsulations and
protocol IDs that are not expl…
Enumerationr/w
Enumerated Values:
1any
2ethertype
3llc
4llcSnapEthertype
 .1.3.6.1.4.1.207.8.12.2.4.5.1.1.4
atiVlanProtocolId
The protocol ID: for entries of type ethertype(2)
or llcSnapEthertype(4) this represents a 16-bit
protocol ID. For entries of type llc(3) it
represents a concatenation of LLC DSAP+SSAP in
network byte order. This value…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.207.8.12.2.4.5.1.1.5
atiVlanProtocolStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.207.8.12.2.4.5.1.1.6

atiVlanProtocolVlanTable

table
.1.3.6.1.4.1.207.8.12.2.4.5.2 · 1 row entry · 3 columns
Open in standard view 
Table to apply one of the protocol definitions 
in atiVlanProtocolTable to a given VLAN 
This applies to all ports that are untagged 
in this VLAN). A limited number of protocols
may be applied simultaneously in one device (up to 8).
atiVlanProtocolVlanEntry entry .1.3.6.1.4.1.207.8.12.2.4.5.2.1
A mapping of untagged packets of one protocol
onto a particular VLAN.
Indexes
atiVlanProtocolVlanIfIndex atiVlanProtocolVlanProtocolIndex
Column Syntax OID
atiVlanProtocolVlanIfIndex
The index value of this row and the vlan's ifIndex in the
ifTable. The NMS obtains the index value for this row by
reading the atiNextAvailableVirtIfIndex object.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.12.2.4.5.2.1.1
atiVlanProtocolVlanProtocolIndex
An index representing a protocol grouping of
protocol ID values. A limited number of
protocol groupings may be defined (up to 7).
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.12.2.4.5.2.1.2
atiVlanProtocolVlanStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.207.8.12.2.4.5.2.1.3