CADANT-CMTS-IF3-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
11
Rows
11
Columns
69

cadCmStatusMdCfgTable

table
.1.3.6.1.4.1.4998.1.1.110.1.1.1 · 1 row entry · 5 columns
Open in standard view 
At MAC Domain creation time with one row per cadCmStatusEventTypeCode 
value for the new MAC Domain. These rows MUST be deleted by the CMTS 
when the MAC Domain is deleted.
cadCmStatusMdCfgEntry entry .1.3.6.1.4.1.4998.1.1.110.1.1.1.1
A conceptual row containing information about the
Cadant CM Status Mac domain configuration.
Indexes
CADANT-CMTS-LAYER2CMTS-MIBcadIfMacDomainIfIndex cadCmStatusEventTypeCode
Column Syntax OID
cadCmStatusEventTypeCode
This field contains a unique code which
describes the event condition. Refer to Table
6-56 in MULPI.
CmStatusEventTypeCode
Textual Convention: CmStatusEventTypeCode Enumeration
Type Values:
1secondaryChlMddTimeout
2qamFecLockFailure
3seqOutOfRange
4mddRecovery
5qamFecLockRecovery
6t4Timeout
7t3RetriesExceeded
8t3RangingRecovery
9cmOnBatteryBackup
10cmAcPowerRestored
16ofdmProfileFailure
18dpdMismatch
20ncpProfileFailure
21plcFecLockFailure
22ncpProfileRecovery
23plcFecLockRecovery
24ofdmProfileRecovery
 .1.3.6.1.4.1.4998.1.1.110.1.1.1.1.1
cadCmStatusEventDescription
Textual description of event. This will
default to a description that is generated by the CMTS
but will be set to the Event Description which is sent
from the CM, if applicable.
OctetString
Constraints:
range: 0-80
 .1.3.6.1.4.1.4998.1.1.110.1.1.1.1.2
cadCmStatusEventEnabled
This attribute represents the enable/disable
for a particular event for which status may be
reported via the CM-STATUS message.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4998.1.1.110.1.1.1.1.3
cadCmStatusMaxEventHoldoff
The CM-STATUS reporting mechanism includes a
random holdoff prior to transmission of status report
messages. This attribute is the maximum value of that
holdoff timer to be used by the CM when determining
when to tra…
20 millisecond incrementsInteger32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.4998.1.1.110.1.1.1.1.4
cadCmStatusMaxNumReports
Maximum Number of Reports per event:
0: Unlimited number of reports
1-255: Maximum number of reports for an event type
reporting transaction.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.4998.1.1.110.1.1.1.1.5

cadCmtsCmCtrlStatusOverrideCfgTable

table
.1.3.6.1.4.1.4998.1.1.110.1.1.2 · 1 row entry · 6 columns
Open in standard view 
A Table containing information about the 
Cadant CM control status override configuration.
cadCmtsCmCtrlStatusOverrideCfgEntry entry .1.3.6.1.4.1.4998.1.1.110.1.1.2.1
A conceptual row containing information about the
Cadant CM control status override configuration.
Indexes
cadCmtsCmCtrlStatusMacAddress cadCmtsCmCtrlStatusEventTypeCode
Column Syntax OID
cadCmtsCmCtrlStatusMacAddress
The CM Mac Address.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.4998.1.1.110.1.1.2.1.1
cadCmtsCmCtrlStatusEventTypeCode
This field contains a unique code which
describes the event condition. Refer to Table
6-56 in MULPI.
CmStatusEventTypeCode
Textual Convention: CmStatusEventTypeCode Enumeration
Type Values:
1secondaryChlMddTimeout
2qamFecLockFailure
3seqOutOfRange
4mddRecovery
5qamFecLockRecovery
6t4Timeout
7t3RetriesExceeded
8t3RangingRecovery
9cmOnBatteryBackup
10cmAcPowerRestored
16ofdmProfileFailure
18dpdMismatch
20ncpProfileFailure
21plcFecLockFailure
22ncpProfileRecovery
23plcFecLockRecovery
24ofdmProfileRecovery
 .1.3.6.1.4.1.4998.1.1.110.1.1.2.1.2
cadCmtsCmCtrlStatusOverrideEnabled
This attribute can be used to override the
CM's primary channel MDD with regard to enabling a
particular event type.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4998.1.1.110.1.1.2.1.3
cadCmtsCmCtrlStatusOverrideDsChList
List of DS channel IDs to which this override
applies.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.4998.1.1.110.1.1.2.1.4
cadCmtsCmCtrlStatusOverrideUsChList
List of US channel IDs to which this override
applies.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.4998.1.1.110.1.1.2.1.5
cadCmtsCmCtrlStatusRowStatus
Row Status for this table
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4998.1.1.110.1.1.2.1.6

cadCmStatusCountsTable

table
.1.3.6.1.4.1.4998.1.1.110.1.1.3 · 1 row entry · 8 columns
Open in standard view 
A Table containing information about the 
Cadant CM status counter.
cadCmStatusCountsEntry entry .1.3.6.1.4.1.4998.1.1.110.1.1.3.1
A conceptual row containing information about the
Cadant CM status counter.
Indexes
cadCmStatusCountsCmMacAddress cadCmStatusEventTypeCode
Column Syntax OID
cadCmStatusCountsCmMacAddress
MAC Address of CM which reported this event.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.4998.1.1.110.1.1.3.1.1
cadCmStatusCountsEventTypeCode
This field contains a unique code which
describes the event condition. Refer to Table
6-56 in MULPI.
CmStatusEventTypeCode
Textual Convention: CmStatusEventTypeCode Enumeration
Type Values:
1secondaryChlMddTimeout
2qamFecLockFailure
3seqOutOfRange
4mddRecovery
5qamFecLockRecovery
6t4Timeout
7t3RetriesExceeded
8t3RangingRecovery
9cmOnBatteryBackup
10cmAcPowerRestored
16ofdmProfileFailure
18dpdMismatch
20ncpProfileFailure
21plcFecLockFailure
22ncpProfileRecovery
23plcFecLockRecovery
24ofdmProfileRecovery
 .1.3.6.1.4.1.4998.1.1.110.1.1.3.1.2
cadCmStatusCountsEventDescription
Textual description of event. This will
default to a description that is generated by the CMTS
but will be set to the Event Description which is sent
from the CM, if applicable.
OctetString
Constraints:
range: 0-80
 .1.3.6.1.4.1.4998.1.1.110.1.1.3.1.3
cadCmStatusCountsEventCount
Count of the number of times that the
cadCmStatusEventTypeCode has been reported for this
CM.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.4998.1.1.110.1.1.3.1.4
cadCmStatusCountsReportedDsChIfIndex
ifIndex corresponding to the reported DCID.
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.4998.1.1.110.1.1.3.1.5
cadCmStatusCountsReportedUsChIfIndex
ifIndex corresponding to the reported UCID.
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.4998.1.1.110.1.1.3.1.6
cadCmStatusCountsReportedDsid
DSID as reported by CM.
DOCS-IF3-MIBDsid
Textual Convention: DOCS-IF3-MIBDsid Unsigned32
Type Constraints:
range: 0..1048575
 .1.3.6.1.4.1.4998.1.1.110.1.1.3.1.7
cadCmStatusCountsTimeStamp
TimeStamp when this row was created.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.4998.1.1.110.1.1.3.1.8

cadCmtsCmRepairParamTable

table
.1.3.6.1.4.1.4998.1.1.110.1.1.4 · 1 row entry · 4 columns
Open in standard view 
A table that contains information on the 
CM repair parameters.
cadCmtsCmRepairParamEntry entry .1.3.6.1.4.1.4998.1.1.110.1.1.4.1
A conceptual row containing information about the
CM repair parameter.
Indexes
CADANT-CMTS-LAYER2CMTS-MIBcadIfMacDomainIfIndex
Column Syntax OID
cadCmtsCmRepairEnabled
When true(1), the CMTS will periodically
attempt to repair any unresolved topology and/or
partial service condition for each CM which has been
added to the CM problem list.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4998.1.1.110.1.1.4.1.1
cadCmtsCmRepairWindowStartTime
Time of day for beginning of CmRepair Window.
HhMmSsr/w
Textual Convention: HhMmSs OctetString
Type Constraints:
range: 3
 .1.3.6.1.4.1.4998.1.1.110.1.1.4.1.2
cadCmtsCmRepairWindowEndTime
Time of day for end of CmRepair Window.
HhMmSsr/w
Textual Convention: HhMmSs OctetString
Type Constraints:
range: 3
 .1.3.6.1.4.1.4998.1.1.110.1.1.4.1.3
cadCmtsCmRepairInterval
Period between repair attemts during repair
window.
HhMmSsr/w
Textual Convention: HhMmSs OctetString
Type Constraints:
range: 3
 .1.3.6.1.4.1.4998.1.1.110.1.1.4.1.4

cadCmtsCmRegImpairedStatusTable

table
.1.3.6.1.4.1.4998.1.1.110.1.1.5 · 1 row entry · 5 columns
Open in standard view 
A table that contains information on the 
CM impaired status.
cadCmtsCmRegImpairedStatusEntry entry .1.3.6.1.4.1.4998.1.1.110.1.1.5.1
A conceptual row containing information about the
CM impaired status.
Indexes
CADANT-CMTS-MAC-MIBcadIfCmtsCmStatusMacAddress cadCmtsCmRegImpairedIfIndex cadCmtsCmRegImpairedReason
Column Syntax OID
cadCmtsCmRegImpairedReason
Reason why CM is considered to be impaired. Reason codes
with lower integer values take precedence over reason codes
with higher values if multiple reasons apply to the same CM.

The unknownMdDsSgId reas…
Enumeration
Enumerated Values:
100qamFecLockFailure
130plcFecLockFailure
150ncpFecLockFailure
170prof0FecLockFailure
200unknownMdDsSgId
300unknownMdUsSgId
400badRcs
500badTcs
600t4Timeout
700t3Timeout
900usStationMaintFailure
 .1.3.6.1.4.1.4998.1.1.110.1.1.5.1.1
cadCmtsCmRegImpairedFaultDetected
Date and time when impairment of CM was
first detected.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.4998.1.1.110.1.1.5.1.2
cadCmtsCmRegImpairedLastRepairAttempt
Date and time when corrective action was
last attempted. If no action has not yet been attempted,
then this time should be the same as
cadCmtsCmRegImpairedFaultDetected.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.4998.1.1.110.1.1.5.1.3
cadCmtsCmRegImpairedLastRepairAction
Type of corrective action last attempted.
If no action has yet been attempted then
the value should be noAction.
Enumeration
Enumerated Values:
0noAction
1cmReset
2dbcMessage
3dccMessage
 .1.3.6.1.4.1.4998.1.1.110.1.1.5.1.4
cadCmtsCmRegImpairedIfIndex
This object indicates either a downstream or upstream channel is impaired.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4998.1.1.110.1.1.5.1.5

cadIf3CmtsCmUsStatusTable

table
.1.3.6.1.4.1.4998.1.1.110.1.1.6 · 1 row entry · 4 columns
Open in standard view 
This object defines status information of the CM
currently in use Upstream Logical Channels, as reported
by the CMTS.
cadIf3CmtsCmUsStatusEntry entry .1.3.6.1.4.1.4998.1.1.110.1.1.6.1
The conceptual row of cadIf3CmtsCmUsStatusTable.
Indexes
CADANT-CMTS-MAC-MIBcadIfCmtsCmStatusMacAddress cadIf3CmtsCmUsStatusChIfIndex
Column Syntax OID
cadIf3CmtsCmUsStatusChIfIndex
This attribute is a key that represents the ifIndex
of the upstream interface.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4998.1.1.110.1.1.6.1.1
cadIf3CmtsCmUsStatusModulationType
This attribute represents the modulation type currently
used by this upstream channel.
DOCS-IF-MIBDocsisUpstreamType
Textual Convention: DOCS-IF-MIBDocsisUpstreamType Enumeration
Type Values:
0unknown
1tdma
2atdma
3scdma
4tdmaAndAtdma
 .1.3.6.1.4.1.4998.1.1.110.1.1.6.1.2
cadIf3CmtsCmUsStatusIsMuted
This attribute has a value 'true' to indicate that
the CM's upstream channel has been muted via
CM-CTRL-REQ/CM-CTRL-RSP message exchange.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4998.1.1.110.1.1.6.1.11
cadIf3CmtsCmUsStatusRangingStatus
This attribute denotes the ranging state of the CM.
DOCS-IF3-MIBRangingState
Textual Convention: DOCS-IF3-MIBRangingState Enumeration
Type Values:
1other
2aborted
3retriesExceeded
4success
5continue
6timeoutT4
 .1.3.6.1.4.1.4998.1.1.110.1.1.6.1.12

cadRccStatusTable

table
.1.3.6.1.4.1.4998.1.1.110.1.1.7 · 1 row entry · 7 columns
Open in standard view 
The RCC Status object provides a read-only view of
the statically-configured (from the RccCfg object)
and dynamically-created RCCs.
The CMTS creates an RCC Status instance for each unique
MAC Domain Cable Modem Service Group (MD-CM-SG) to
which it signals an RCC to the CM.
cadRccStatusEntry entry .1.3.6.1.4.1.4998.1.1.110.1.1.7.1
The conceptual row of cadRccStatusTable.
The ifIndex key corresponds to the MAC Domain interface
where the RCC is configured.
Indexes
CADANT-CMTS-LAYER2CMTS-MIBcadIfMacDomainIfIndex cadRccStatusRcpId cadRccStatusId
Column Syntax OID
cadRccStatusRcpId
This key represents the RCP-ID to which this instance
applies.
DOCS-IF3-MIBRcpId
Textual Convention: DOCS-IF3-MIBRcpId OctetString
Type Constraints:
range: 5
 .1.3.6.1.4.1.4998.1.1.110.1.1.7.1.1
cadRccStatusId
This key represents an RCC combination for a particular
RcpId either from an RCC configuration object
or a CMTS-determined RCC and is unique per combination
of MAC Domain IfIndex and RcpId.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.4998.1.1.110.1.1.7.1.2
cadRccStatusRccCfgId
This attribute identifies an RCC-Configured combination
from which this instance was defined. If nonzero,
it corresponds to the RccCfg instance from which
the RCC was created. Zero means that the RCC was dynamically
cr…
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.4998.1.1.110.1.1.7.1.3
cadRccStatusValidityCode
This attribute indicates whether the RCC instance
of this object is valid or not. An RCC Status instance
from a configured or a dynamic RCC could become invalid,
for example, due changes in the topology.
Enumeration
Enumerated Values:
1other
2valid
3invalid
4wrongPrimaryDs
5missingPrimaryDs
6multiplePrimaryDs
7duplicateDs
8wrongFrequencyRange
9wrongConnectivity
 .1.3.6.1.4.1.4998.1.1.110.1.1.7.1.4
cadRccStatusValidityCodeText
This attribute contains the CMTS vendor-specific
log information from the Receive Channel Configuration
Status encoding.
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4998.1.1.110.1.1.7.1.5
cadRccStatusDsChSetId
This object contains the ID for the downstream channel set used by this RCC.
It is only unique in association with a specific MAC domain.
DOCS-IF3-MIBChSetId
Textual Convention: DOCS-IF3-MIBChSetId Unsigned32
 .1.3.6.1.4.1.4998.1.1.110.1.1.7.1.6
cadRccStatusChannelCount
This object provides the number of downstream channels provided by a modem using this RCC.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4998.1.1.110.1.1.7.1.7

cadIf3UsChSetTable

table
.1.3.6.1.4.1.4998.1.1.110.1.1.8 · 1 row entry · 1 columns
Open in standard view 
This object defines a set of upstream channels. These
channel sets may be associated with TCSID.
cadIf3UsChSetEntry entry .1.3.6.1.4.1.4998.1.1.110.1.1.8.1
The conceptual row of cadIf3UsChSetTable.
The ifIndex key corresponds to the MAC Domain interface
where the upstream channel set is defined.
Indexes
IF-MIBifIndex DOCS-IF3-MIBdocsIf3UsChSetId cadIf3UsChIfIndex
Column Syntax OID
cadIf3UsChIfIndex
This object is associated with an upstream channel ifIndex.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4998.1.1.110.1.1.8.1.1

cadIf3DsChSetTable

table
.1.3.6.1.4.1.4998.1.1.110.1.1.9 · 1 row entry · 1 columns
Open in standard view 
This object defines a set of downstream channels. These
channel sets may be associated with RCSID.
cadIf3DsChSetEntry entry .1.3.6.1.4.1.4998.1.1.110.1.1.9.1
The conceptual row of cadIf3DsChSetTable.
The ifIndex key corresponds to the MAC Domain interface
where the downstream channel set is defined.
Indexes
IF-MIBifIndex DOCS-IF3-MIBdocsIf3DsChSetId cadIf3DsChIfIndex
Column Syntax OID
cadIf3DsChIfIndex
This object is associated with an downstream channel ifIndex.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4998.1.1.110.1.1.9.1.1

cadIf3CsSummaryTable

table
.1.3.6.1.4.1.4998.1.1.110.1.1.10 · 1 row entry · 23 columns
Open in standard view 
This table contains counts of the modems using a particular upstream
or downstream channel set.  It is used to construct
cadIf3CsSummaryEntry entry .1.3.6.1.4.1.4998.1.1.110.1.1.10.1
The conceptual row of the cadIf3CsSummary table that contains the
the count of modems using this channel set.
Indexes
IF-MIBifIndex cadIf3CsDir cadIf3CsId
Column Syntax OID
cadIf3CsDir deprecated
The direction of the channel set associated with this modem count.
DOCS-IF3-MIBIfDirection
Textual Convention: DOCS-IF3-MIBIfDirection Enumeration
Type Values:
1downstream
2upstream
 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.1
cadIf3CsId deprecated
The channel set associated with this modem count.
DOCS-IF3-MIBChSetId
Textual Convention: DOCS-IF3-MIBChSetId Unsigned32
 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.2
cadIf3CsNumOther deprecated
The number of modems on this channel set in state other(1)
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.3
cadIf3CsNumInitRanging deprecated
The number of modems on this channel set in state initialRanging(2)
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.4
cadIf3CsNumRangingComplete deprecated
The number of modems on this channel set in state rangingAutoAdjComplete(4)
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.5
cadIf3CsNumStartEae deprecated
The number of modems on this channel set in state startEae(10)
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.6
cadIf3CsNumStartDhcpv4 deprecated
The number of modems on this channel set in state startDhcpv4(11)
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.7
cadIf3CsNumStartDhcpv6 deprecated
The number of modems on this channel set in state startDhcpv6(12)
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.8
cadIf3CsNumDhcpv4Complete deprecated
The number of modems on this channel set in state dhcpv4Complete(5)
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.9
cadIf3CsNumDhcpv6Complete deprecated
The number of modems on this channel set in state dhcpv6Complete(13)
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.10
cadIf3CsNumStartCfgFileDownload deprecated
The number of modems on this channel set in state startConfigFileDownload(14)
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.11
cadIf3CsNumCfgFileDownloadComplete deprecated
The number of modems on this channel set in state configFileDownloadComplete(15)
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.12
cadIf3CsNumStartRegistration deprecated
The number of modems on this channel set in state startRegistration(16)
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.13
cadIf3CsNumRegistrationComplete deprecated
The number of modems on this channel set in state registrationComplete(6)
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.14
cadIf3CsNumOperational deprecated
The number of modems on this channel set in state operational(8)
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.15
cadIf3CsNumBpiInit deprecated
The number of modems on this channel set in state bpiInit(9)
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.16
cadIf3CsNumForwardingDisabled deprecated
The number of modems on this channel set in state forwardingDisabled(17)
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.17
cadIf3CsNumRfMuteAll deprecated
The number of modems on this channel set in state rfMuteAll(18)
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.18
cadIf3CsNumTotal deprecated
The total count of cable modems on this channel set
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.19
cadIf3CsNumRangingAborted deprecated
The number of modems on this channel set in state rangingAborted(3)
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.20
cadIf3CsNumRangFlaps deprecated
The number of times a CM on this channel set has reset in Ranging states.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.21
cadIf3CsNumProvFlaps deprecated
The number of times a CM on this channel set has reset in Provisioning states.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.22
cadIf3CsNumRegFlaps deprecated
The number of times a CM on this channel set has reset in Registered state.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4998.1.1.110.1.1.10.1.23

cadIfCmtsCmFailedProfStatusTable

table
.1.3.6.1.4.1.4998.1.1.110.1.1.12 · 1 row entry · 5 columns
Open in standard view 
A table that contains information on the 
CM impaired status (partial channel condition).
cadIfCmtsCmFailedProfStatusEntry entry .1.3.6.1.4.1.4998.1.1.110.1.1.12.1
A conceptual row containing information about the
CM impaired OFDM profile status.
Indexes
cadIfCmtsCmFailedProfMacAddress cadIfCmtsCmFailedProfIfIndex cadIfCmtsCmFailedProfId cadIfCmtsCmFailedProfReason
Column Syntax OID
cadIfCmtsCmFailedProfMacAddress
The MAC address of the modem experiencing the failure.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.4998.1.1.110.1.1.12.1.1
cadIfCmtsCmFailedProfIfIndex
This is the ifIndex of the channel associated with the
Failed profile.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4998.1.1.110.1.1.12.1.2
cadIfCmtsCmFailedProfId
The profile number of this profile plus one.
Profile IDs zero and 255 result in partial service,
not a partial channel condition, so they are not in
this table.
Integer32
Constraints:
range: 2-16
 .1.3.6.1.4.1.4998.1.1.110.1.1.12.1.3
cadIfCmtsCmFailedProfReason
Reason why a profile is considered to be impaired.

The lostFecLock reason is used when the CM sends a
DS OFDM profile failure CM-STATUS message for an OFDM
channel and profile. This is sent when the CM d…
Enumeration
Enumerated Values:
300lostFecLock
 .1.3.6.1.4.1.4998.1.1.110.1.1.12.1.4
cadIfCmtsCmFailedProfFaultDetected
Date and time when impairment of CM was
first detected.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.4998.1.1.110.1.1.12.1.5