C-PRODUCT-CBR-V35-MIB Table View – Observium MIB Browser

cbrV35PortConfTable

table mandatory

.0.0.1.1.15.5.1 · 1 row entry · 11 columns

This object contains the CBR's V.35 specific port Configuration table.
There is one cbrV35PortConfEntry associated for each provisioned
CBR port interface within the shelf. This table uses portSlot and
portNumber as an index which is defined in the portBaseTable of the
C-PRODUCT BASE MIB. This index value uniquely identifies the CBR port
interface to which this entry is applicable.

cbrV35PortConfEntry entry .0.0.1.1.15.5.1.1

An entry in the CBR specific port Configuration table.

Indexes

C-PRODUCT-BASE-MIBportSlot C-PRODUCT-BASE-MIBportNumber

Column Syntax OID

cbrV35PortConfCableType mandatory

This object indicates the type of cable connected to the port.
An error is returned if an access is attempted on
a physical interface other than a V.35 port interface. The default
value is none (1).

Enumeration

Enumerated Values:

1	none
2	dte
3	dce

.0.0.1.1.15.5.1.1.1

cbrV35PortConfScrClockSource mandatory

This object indicates the SCR clock source. This is
aplicable for both DCE & DTE cable types.
If the cable type is 'none', a get request returns
whatever the value currently stored in the managed node for this
port and…

Enumerationr/w

Enumerated Values:

1	internal
2	adaptive

.0.0.1.1.15.5.1.1.2

cbrV35PortConfTxClockPhase mandatory

This object indicates the type of Transmit clock phase needed to
correct the clock out of phase problem. This is aplicable ONLY when
a 'dte' cable is connected to the port.
The default value is normal (1).

Enumerationr/w

Enumerated Values:

1	normal
2	inverted

.0.0.1.1.15.5.1.1.3

cbrV35PortConfRts mandatory

This object indicates RTS pin status. Default value is off (1).

Enumeration

Enumerated Values:

1	off
2	on

.0.0.1.1.15.5.1.1.4

cbrV35PortConfCts mandatory

This object indicates CTS pin status. Default value is off (1).

Enumeration

Enumerated Values:

1	off
2	on

.0.0.1.1.15.5.1.1.5

cbrV35PortConfDcd mandatory

This object indicates DCD pin status. Default value is off (1).

Enumeration

Enumerated Values:

1	off
2	on

.0.0.1.1.15.5.1.1.6

cbrV35PortConfDsr mandatory

This object indicates DSR pin status. Default value is off (1).

Enumeration

Enumerated Values:

1	off
2	on

.0.0.1.1.15.5.1.1.7

cbrV35PortConfSctClockSource mandatory

This object indicates the type of SCT clock source. This is
aplicable for both 'DCE' & 'DTE' cable types. If no cable
is attached then it just reflects the value stored in the database.
The default value is internal (…

Enumerationr/w

Enumerated Values:

1	recovered
2	internal

.0.0.1.1.15.5.1.1.8

cbrV35PortConfRxTimingSource mandatory

This object indicates the Serial interface Recieive Timing Source.
The default value is dce-transmit-clock.

Enumerationr/w

Enumerated Values:

1	echo-clock-from-dte
2	dce-transmit-clock

.0.0.1.1.15.5.1.1.9

cbrV35PortConfCableID mandatory

This object indicates the type of physical interface.

Enumeration

Enumerated Values:

1	none
2	v35
3	rs422

.0.0.1.1.15.5.1.1.10

cbrV35PortConfLoopBackType mandatory

This object indicates the type of loopback configured for the
specified T1/E1 port interface. Network-line (2) redirects incoming
remote traffic back into the network interface at the external edge of
the card interface…

Enumerationr/w

Enumerated Values:

1	no-loopback
3	local-card
4	network-card
5	no-response

.0.0.1.1.15.5.1.1.11