BRCMROBOMGMT5324MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
17
Rows
17
Columns
58

portTable

table mandatory
.1.3.6.1.4.1.655.9.22.1.2.1 · 1 row entry · 10 columns
Open in standard view 
Basic information for each port.
portEntry entry .1.3.6.1.4.1.655.9.22.1.2.1.1
Port information entry.
Indexes
portIndex
Column Syntax OID
portIndex mandatory
port number,
This is defined as ifIndex in the IF-MIB.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.655.9.22.1.2.1.1.1
portName mandatory
Name of each port.
OctetStringr/w
Constraints:
range: 0-12
 .1.3.6.1.4.1.655.9.22.1.2.1.1.2
portType mandatory
The type of each port.
Enumeration
Enumerated Values:
1other
2s100tx
3s100fx
4s1000tx
5s1000fx
 .1.3.6.1.4.1.655.9.22.1.2.1.1.3
portLink mandatory
This object indicates the link status of each port is
up or down.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.655.9.22.1.2.1.1.4
portEnable mandatory
Enable/disable status of the port,
default = enable(1).
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.655.9.22.1.2.1.1.5
portAdminMode mandatory
To Control the speed & duplex mode for 10/100Mb ports,
default = AutoNegotiation (1)
(1) AutoNegotiation : detect by AN (i.e. AN enable)
if link partner do not support AN,
the port is force to half duplex mode.
…
Enumerationr/w
Enumerated Values:
1autonegotiation
2s10mhalf
3s10mfull
4s100mhalf
5s100mfull
6s1000mhalf
7s1000mfull
 .1.3.6.1.4.1.655.9.22.1.2.1.1.6
portSpeedDpxStatus mandatory
The operating speed and duplex mode of the switched port.
Enumeration
Enumerated Values:
1error
2halfDuplex10
3fullDuplex10
4halfDuplex100
5fullDuplex100
6halfDuplex1000
7fullDuplex1000
 .1.3.6.1.4.1.655.9.22.1.2.1.1.7
portFlowControlConfiguration mandatory
Flow control configuration,
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.655.9.22.1.2.1.1.8
portFlowCtrlStatus mandatory
(1) Flow control mechanism is disabled.
(2) BackPressure flow control machanism is used.
(3) IEEE 802.3 flow control machanism is used.
Enumeration
Enumerated Values:
1none
2backpressure
3dot3xflowcontrol
 .1.3.6.1.4.1.655.9.22.1.2.1.1.9
portTrunkID mandatory
The trunk to which this port belongs. A value of 0
means that this port does not belong to any trunk.
A value greater than zero means that this port
belongs to trunk at trunkIndex, defined by the
corresponding trunkPort…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.655.9.22.1.2.1.1.10

netConfigTable

table mandatory
.1.3.6.1.4.1.655.9.22.1.2.2 · 1 row entry · 6 columns
Open in standard view 
This table contains addressing information relevant
to this interface corresponding to IfEntry table.
The number of entries is given by the value of ifNumber.
netConfigEntry entry .1.3.6.1.4.1.655.9.22.1.2.2.1
Indexes
netConfigIndex
Column Syntax OID
netConfigIndex mandatory
This index value uniquely identifies the interface
to which this entry is applicable.
This is defined as ifIndex in the IF-MIB.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.655.9.22.1.2.2.1.1
netConfigOperation mandatory
This object indicates the operational status of this
device.
Enumeration
Enumerated Values:
1ok
2failure
 .1.3.6.1.4.1.655.9.22.1.2.2.1.2
netConfigMacAddr mandatory
The MAC address of the specified interface of the
device.
MacAddress
Textual Convention: MacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.655.9.22.1.2.2.1.3
netConfigIpAddr mandatory
The Internet address of the specified interface of the
device.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.655.9.22.1.2.2.1.4
netConfigSNetMask mandatory
The internet address subnet mask of the specified interface
of the device.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.655.9.22.1.2.2.1.5
netConfigDfGateway mandatory
The default gateway address which the routed packets are
delivered to.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.655.9.22.1.2.2.1.6

switchTrapManagerTable

table mandatory
.1.3.6.1.4.1.655.9.22.1.3.2 · 1 row entry · 3 columns
Open in standard view 
This table contains the information needed
for sending traps.
switchTrapManagerEntry entry .1.3.6.1.4.1.655.9.22.1.3.2.1
Indexes
switchTrapManagerIndex
Column Syntax OID
switchTrapManagerIndex mandatory Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.655.9.22.1.3.2.1.1
switchTrapManagerIpAddr mandatory
The Internet address of the management station which
trap is sent to .
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.655.9.22.1.3.2.1.2
switchTrapManagerComm mandatory
Community name used for sending the trap to this management
station
OctetStringr/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.655.9.22.1.3.2.1.3

addrPortTable

table mandatory
.1.3.6.1.4.1.655.9.22.1.4.1.1 · 1 row entry · 2 columns
Open in standard view 
Address table for each port.
addrPortEntry entry .1.3.6.1.4.1.655.9.22.1.4.1.1.1
Address table entry for each port.
Indexes
addrPortIndex
Column Syntax OID
addrPortIndex mandatory
Port index.
This is defined as ifIndex in the IF-MIB.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.655.9.22.1.4.1.1.1.1
addrPortLastSrcAddress mandatory
The object is the last source address in this port
MacAddress
Textual Convention: MacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.655.9.22.1.4.1.1.1.2

addrStaticTable

table mandatory
.1.3.6.1.4.1.655.9.22.1.4.2.8 · 1 row entry · 2 columns
Open in standard view 
The table contain information about static entry in the device.
addrStaticEntry entry .1.3.6.1.4.1.655.9.22.1.4.2.8.1
Indexes
addrStaticIndex
Column Syntax OID
addrStaticIndex mandatory
This index value uniquely identifies the address in
static table.
Value range between 1 and the value of
addrStaticMaxAddrNumber.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.655.9.22.1.4.2.8.1.1
addrStaticSetAddress mandatory
To set/modify the static address.
If the two entries are occupied by the other static addresses,
the set is fail
OctetStringr/w .1.3.6.1.4.1.655.9.22.1.4.2.8.1.2

portMACSecurityConfig

table mandatory
.1.3.6.1.4.1.655.9.22.1.4.3 · 1 row entry · 2 columns
Open in standard view 
The MAC security configuration.
portMacSecurityEntry entry .1.3.6.1.4.1.655.9.22.1.4.3.1
The Static Mac number and Mac Security mode of each port.
Indexes
portMacIndex
Column Syntax OID
portMacIndex mandatory
This is defined as ifIndex in the IF-MIB.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.655.9.22.1.4.3.1.1
portStaticMacNo mandatory
The static mac number of port.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.655.9.22.1.4.3.1.2

addrDynamicTable

table mandatory
.1.3.6.1.4.1.655.9.22.1.4.4 · 1 row entry · 2 columns
Open in standard view 
The table contain information about dynamic entry in the device.
addrDynamicEntry entry .1.3.6.1.4.1.655.9.22.1.4.4.1
Indexes
addrDynamicIndex
Column Syntax OID
addrDynamicIndex mandatory
This index value uniquely identifies the address in
dynamic arl table. Value range between 1 and MaxDynamicIndex.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.655.9.22.1.4.4.1.1
addrDynamicSetAddress mandatory
To show the dynamic address. Format: MAC(6 bytes)+Portid(4 bytes)+VID(2 bytes).
OctetString .1.3.6.1.4.1.655.9.22.1.4.4.1.2

statisticPortTable

table mandatory
.1.3.6.1.4.1.655.9.22.1.5.2 · 1 row entry · 6 columns
Open in standard view 
A table that contains information about every
port that is associated with this transparent
bridge.
statisticPortEntry entry .1.3.6.1.4.1.655.9.22.1.5.2.1
A list of information for each port of a
transparent bridge.
Indexes
statisticPort
Column Syntax OID
statisticPort mandatory
This is defined as ifIndex in the IF-MIB.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.655.9.22.1.5.2.1.1
statisticPortSymbolErrorCounts mandatory
The number of times a packet contained symbol error
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.655.9.22.1.5.2.1.2
statisticPortReceiveExcessSizeDiscards mandatory
The number of frame that are greater than 1536 bytes
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.655.9.22.1.5.2.1.3
statisticPortTransmtInDiscards mandatory
The number of frame which are discarded due to lack of space
on an output queue.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.655.9.22.1.5.2.1.4
statisticPortTransmitPauseControlFrameCounts mandatory
The counter of PAUSE control packets transmitted by a port
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.655.9.22.1.5.2.1.5
statisticPortReceivePauseControlFrameCounts mandatory
The counter of PAUSE control packets received by a port
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.655.9.22.1.5.2.1.6

portAuthenticationMode

table mandatory
.1.3.6.1.4.1.655.9.22.1.7.14 · 1 row entry · 1 columns
Open in standard view 
The authentication mode of port in 802.1x.
portModeEntry entry .1.3.6.1.4.1.655.9.22.1.7.14.1
For 802.1p frame, mapping the 802.1p pri[2:0] (priority tag)
to the priority queue of the system.
Indexes
portDot1xIndex
Column Syntax OID
portDot1xIndex mandatory
This is defined as ifIndex in the IF-MIB.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.655.9.22.1.7.14.1.1

portTrunkTable

table mandatory
.1.3.6.1.4.1.655.9.22.1.8.1.4 · 1 row entry · 5 columns
Open in standard view 
The table contain information for Port Trunking function.
portTrunkEntry entry .1.3.6.1.4.1.655.9.22.1.8.1.4.1
Table entry of port Trunk.
Indexes
portTrunkIndex
Column Syntax OID
portTrunkIndex mandatory
Value range between 1 and the value of portTrunkMaxGroupCount
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.655.9.22.1.8.1.4.1.1
portTrunkGet mandatory
Get Port map in the specific trunk
PortList
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.655.9.22.1.8.1.4.1.2
portTrunkGroupDestory mandatory
A state to present whether the Port Trunk group is
ON or OFF in the device.
The default value is OFF.
Enumerationr/w
Enumerated Values:
1nodestory
2destory
 .1.3.6.1.4.1.655.9.22.1.8.1.4.1.3
portTrunkPortAdd mandatory
Add ports to the specific Truck group.
PortListr/w
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.655.9.22.1.8.1.4.1.4
portTrunkPortRemove mandatory
Remove ports from the specific Truck group.
PortListr/w
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.655.9.22.1.8.1.4.1.5

spanningTreeLinkTable

table mandatory
.1.3.6.1.4.1.655.9.22.1.9.2 · 1 row entry · 2 columns
Open in standard view 
A table that contains information about link
delay switch of each port.
spanningTreeLinkEntry entry .1.3.6.1.4.1.655.9.22.1.9.2.1
A list of information for delay switch of each port.
Indexes
spanningTreeLinkIndex
Column Syntax OID
spanningTreeLinkIndex mandatory
The index of the port number for which this entry
contains link delay switch information of each
port.
This is defined as ifIndex in the IF-MIB.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.655.9.22.1.9.2.1.1
spanningTreeLinkDelaySwitch mandatory
A switch to select whether the spanning tree will do the
link delay or not. The default is ON.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.655.9.22.1.9.2.1.2

portPriorityTable

table mandatory
.1.3.6.1.4.1.655.9.22.1.10.2 · 1 row entry · 3 columns
Open in standard view 
Port Priority information for each port.
portPriorityEntry entry .1.3.6.1.4.1.655.9.22.1.10.2.1
Port priority information entry.
Indexes
portPriorityIndex
Column Syntax OID
portPriorityIndex mandatory
This is defined as ifIndex in the IF-MIB.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.655.9.22.1.10.2.1.1
portPrioritySetting mandatory
port priority setting
Enumerationr/w
Enumerated Values:
1priorityhigh
2prioritylow
 .1.3.6.1.4.1.655.9.22.1.10.2.1.2
port8021PSetting mandatory
port 802.1p priority setting
Enumerationr/w
Enumerated Values:
1settingEnable
2settingDisable
 .1.3.6.1.4.1.655.9.22.1.10.2.1.3

multiPortGroupTable

table mandatory
.1.3.6.1.4.1.655.9.22.1.11.2 · 1 row entry · 3 columns
Open in standard view 
The information for the multicast group which stored in the
multi-port table
multiPortGroupEntry entry .1.3.6.1.4.1.655.9.22.1.11.2.1
multi-port information entry.
Indexes
multiPortGroupIndex
Column Syntax OID
multiPortGroupIndex mandatory Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.655.9.22.1.11.2.1.1
multiPortGroupMACAddress mandatory MacAddress
Textual Convention: MacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.655.9.22.1.11.2.1.2
multiPortGroupMember mandatory
The port number belong to the multicast group
PortListr/w
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.655.9.22.1.11.2.1.3

rcIngressPortTable

table mandatory
.1.3.6.1.4.1.655.9.22.1.12.2 · 1 row entry · 2 columns
Open in standard view 
The information for Ingress Rate Control of per port.
rcIngressPortEntry entry .1.3.6.1.4.1.655.9.22.1.12.2.1
Ingress Rate Control information entry.
Indexes
rcIngressPortIndex
Column Syntax OID
rcIngressPortIndex mandatory Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.655.9.22.1.12.2.1.1
rcIngressCount mandatory
Rate = No Limit , when N=0.
Rate = N*64 Kbps , when N=1~28.
Rate = (N-27)*1 Mbps , when N=29~127.
Rate = (N-115)*8Mb, when N=128~240. (only for gigabit port)
Integer32r/w
Constraints:
range: 0-240
 .1.3.6.1.4.1.655.9.22.1.12.2.1.2

rcEngressPortTable

table mandatory
.1.3.6.1.4.1.655.9.22.1.12.3 · 1 row entry · 2 columns
Open in standard view 
The information for Engress Rate Control of per port.
rcEngressPortEntry entry .1.3.6.1.4.1.655.9.22.1.12.3.1
Engress Rate Control information entry.
Indexes
rcEngressPortIndex
Column Syntax OID
rcEngressPortIndex mandatory Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.655.9.22.1.12.3.1.1
rcEngressCount mandatory
Rate = No Limit , when N=0.
Rate = N*64 Kbps , when N=1~28.
Rate = (N-27)*1 Mbps , when N=29~127.
Rate = (N-115)*8Mb, when N=128~240. (only for gigabit port)
Integer32r/w
Constraints:
range: 0-240
 .1.3.6.1.4.1.655.9.22.1.12.3.1.2

scPortTable

table mandatory
.1.3.6.1.4.1.655.9.22.1.13.4 · 1 row entry · 1 columns
Open in standard view 
The information for Storm Control of each port.
scPortEntry entry .1.3.6.1.4.1.655.9.22.1.13.4.1
Storm Control information entry for each port.
Indexes
scPortIndex
Column Syntax OID
scPortIndex mandatory Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.655.9.22.1.13.4.1.1

virtualLanTable

table mandatory
.1.3.6.1.4.1.655.9.22.1.14.5 · 1 row entry · 6 columns
Open in standard view 
The table contain information for Virtual LAN function.
virtualLanEntry entry .1.3.6.1.4.1.655.9.22.1.14.5.1
Table entry of port monitor.
Indexes
virtualLanIndex
Column Syntax OID
virtualLanIndex mandatory
VLAN ID, the value range between 1 and the value of
virtualLanMaxDomainCount
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.655.9.22.1.14.5.1.1
virtualLanDomainName mandatory
Domain name
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.655.9.22.1.14.5.1.2
virtualLanGet mandatory
Get Port map in the specific VLAN
PortList
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.655.9.22.1.14.5.1.3
virtualLanDomainDestory mandatory
To reset the domain's VLAN configuration.
The default VLAN can not be destory. Ports which do not belong
to other VLAN are belong to the default VLAN.
Enumerationr/w
Enumerated Values:
1nodestory
2destory
 .1.3.6.1.4.1.655.9.22.1.14.5.1.4
virtualLanPortAdd mandatory
Add ports to the specific VLAN
PortListr/w
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.655.9.22.1.14.5.1.5
virtualLanPortRemove mandatory
Remove the specific ports from the given VLAN
PortListr/w
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.655.9.22.1.14.5.1.6