BRCM-80211-MGMT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
10
Rows
10
Columns
33

dot1164BitKeyTable

table deprecated
.1.3.6.1.4.1.4413.2.2.2.1.5.2.4 · 1 row entry · 2 columns
Open in standard view 
A table of 40 bit key values used when dot11EncryptionMode is set to 
wep64(1).
dot1164BitKeyEntry entry .1.3.6.1.4.1.4413.2.2.2.1.5.2.4.1
A row in the table which represents a single 64 bit key.
Indexes
dot1164BitKeyIndex
Column Syntax OID
dot1164BitKeyIndex deprecated
Identifies the instance of this table row.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.4413.2.2.2.1.5.2.4.1.1
dot1164BitKeyValue deprecated
A 40 bit key to be used when dot11EncryptionMode is set to wep64(1).
OctetStringr/w
Constraints:
range: 5-5
 .1.3.6.1.4.1.4413.2.2.2.1.5.2.4.1.2

dot11128BitKeyTable

table deprecated
.1.3.6.1.4.1.4413.2.2.2.1.5.2.5 · 1 row entry · 2 columns
Open in standard view 
A table of 104 bit key values used when dot11EncryptionMode is set to 
wep128(2).
dot11128BitKeyEntry entry .1.3.6.1.4.1.4413.2.2.2.1.5.2.5.1
A row in the table which represents a single 128 bit key.
Indexes
dot11128BitKeyIndex
Column Syntax OID
dot11128BitKeyIndex deprecated
Identifies the instance of this table row.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.4413.2.2.2.1.5.2.5.1.1
dot11128BitKeyValue deprecated
A 104 bit key to be used when dot11EncryptionMode is set to
wep128(2).
OctetStringr/w
Constraints:
range: 13-13
 .1.3.6.1.4.1.4413.2.2.2.1.5.2.5.1.2

dot11AccessTable

table deprecated
.1.3.6.1.4.1.4413.2.2.2.1.5.3.5 · 1 row entry · 2 columns
Open in standard view 
A table of MAC addresses which represents stations that will be allowed
to connect to the device if dot11AccessMode is set to 
restrictToList(1).
dot11AccessEntry entry .1.3.6.1.4.1.4413.2.2.2.1.5.3.5.1
A row in the table that specifies a single station MAC address.
Indexes
dot11AccessIndex
Column Syntax OID
dot11AccessIndex deprecated
Indicates the instance of this table row.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.4413.2.2.2.1.5.3.5.1.1
dot11AccessStation deprecated
A MAC address of a station which will be allowed to connect to the
device if dot11AccessMode is set to restrictToList(1).
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.4413.2.2.2.1.5.3.5.1.2

dot11BssTable

table
.1.3.6.1.4.1.4413.2.2.2.1.5.4.1.14 · 1 row entry · 7 columns
Open in standard view 
A table of entries in an MBSS system.
dot11BssEntry entry .1.3.6.1.4.1.4413.2.2.2.1.5.4.1.14.1
An entry describing the characteristics of an individual BSS. An
entry exists in this table for each entry of type ieee80211 (71) in
the ifTable.
Indexes
IF-MIBifIndex
Column Syntax OID
dot11BssId
The physical address associated with this service set.
SNMPv2-TCPhysAddress
Textual Convention: SNMPv2-TCPhysAddress OctetString
 .1.3.6.1.4.1.4413.2.2.2.1.5.4.1.14.1.1
dot11BssEnable
Enables or disables this service set.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4413.2.2.2.1.5.4.1.14.1.2
dot11BssSsid
Controls and reflects the service set identifier for this BSS.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.4413.2.2.2.1.5.4.1.14.1.3
dot11BssNetworkBridge deprecated
If set to lan(1), this service set will be authorized as a member of
the local area network. If set to guest(2), this service set will
have access to the wide area internet, but will have restricted access
to the local…
Enumerationr/w
Enumerated Values:
1lan
2guest
 .1.3.6.1.4.1.4413.2.2.2.1.5.4.1.14.1.4
dot11BssSecurityMode
Security mode may be chosen from Disable, WEP, WPA-PSK, WPA2-PSK,
WPA-Enterprise, WPA2-Enterprise or RADIUS-WEP. All devices on the
network must use the same security mode in order to communicate.

If se…
Enumerationr/w
Enumerated Values:
0disabled
1wep
2wpaPsk
3wpa2Psk
4wpaEnterprise
5wpa2Enterprise
6radiusWep
 .1.3.6.1.4.1.4413.2.2.2.1.5.4.1.14.1.5
dot11BssClosedNetwork
Controls whether the device will operate in closed network mode. If
set to true(1), then the network mode is closed and the SSID will not
be broadcast in beacon packets. If set to false(2), then the network
mode is op…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4413.2.2.2.1.5.4.1.14.1.6
dot11BssAccessMode
Controls what stations will be given access to the device. If set to
allowAny(1), then any station will be allowed to connect. If set
to restrictToList(2), then only stations whose MAC address appears in
the dot11BssA…
Enumerationr/w
Enumerated Values:
1allowAny
2allowList
3denyList
 .1.3.6.1.4.1.4413.2.2.2.1.5.4.1.14.1.7

dot11BssWepTable

table
.1.3.6.1.4.1.4413.2.2.2.1.5.4.2.1 · 1 row entry · 3 columns
Open in standard view 
A table used to configure settings related to the WEP security modes.
dot11BssWepEntry entry .1.3.6.1.4.1.4413.2.2.2.1.5.4.2.1.1
An entry defining the WPA characteristics of an individual service set.
A row exists in this table for each row in the dot11BssTable for which
dot11BssSecurityMode is set to wep(1) or radiusWep(6).
Indexes
IF-MIBifIndex
Column Syntax OID
dot11BssWepDefaultKey
Controls and reflects the default key which will be used when 64 or
128 bit encryption is enabled. Indicates the entry from the
dot11BssWep64BitKeyTable if dot11EncryptionMode is set to wep64(1), or
the entry from the…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4413.2.2.2.1.5.4.2.1.1.1
dot11BssWepEncryptionMode
Selects the WEP encryption method used by this service set.
If set to wep64(1), then 64 bit WEP encryption will be
used with the keys from the dot11BssWep64BitKeyTable. If set to
wep128(2), then 128 bit WEP encryption…
Enumerationr/w
Enumerated Values:
1wep64
2wep128
 .1.3.6.1.4.1.4413.2.2.2.1.5.4.2.1.1.2
dot11BssWepPassPhrase
The passphrase used for WEP security.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.4413.2.2.2.1.5.4.2.1.1.3

dot11BssWep64BitKeyTable

table
.1.3.6.1.4.1.4413.2.2.2.1.5.4.2.2 · 1 row entry · 3 columns
Open in standard view 
A table of 40 bit key values used when operating in WEP 64 mode.
dot11BssWep64BitKeyEntry entry .1.3.6.1.4.1.4413.2.2.2.1.5.4.2.2.1
A key to be used by the row in the dot11BssTable identified by the
value of ifIndex in the row index.
Indexes
IF-MIBifIndex dot11BssWep64BitKeyIndex
Column Syntax OID
dot11BssWep64BitKeyIndex
Identifies an instance of a key among those used by the service set
identified by the value of ifIndex in the row index.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.4413.2.2.2.1.5.4.2.2.1.1
dot11BssWep64BitKeyValue
A 40 bit key to be used when the corresponding instance of
dot11BssSecurityMode is set to wep(1) and the corresponding instance
of dot11BssWepEncryptionMode is set to wep64(1).
OctetStringr/w
Constraints:
range: 5-5
 .1.3.6.1.4.1.4413.2.2.2.1.5.4.2.2.1.2
dot11BssWep64BitKeyStatus
The status of this conceptual row.

To create a row in this table, a manager must set this object to
either createAndGo(4) or createAndWait(5).

Until instances of all corresponding columns …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4413.2.2.2.1.5.4.2.2.1.3

dot11BssWep128BitKeyTable

table
.1.3.6.1.4.1.4413.2.2.2.1.5.4.2.3 · 1 row entry · 3 columns
Open in standard view 
A table of 104 bit key values used when operating in WEP 128 mode.
dot11BssWep128BitKeyEntry entry .1.3.6.1.4.1.4413.2.2.2.1.5.4.2.3.1
A key to be used by the row in the dot11BssTable identified by the
value of ifIndex in the row index.
Indexes
IF-MIBifIndex dot11BssWep128BitKeyIndex
Column Syntax OID
dot11BssWep128BitKeyIndex
Identifies an instance of a key among those used by the service set
identified by the value of ifIndex in the row index.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.4413.2.2.2.1.5.4.2.3.1.1
dot11BssWep128BitKeyValue
A 104 bit key to be used when the corresponding instance of
dot11BssSecurityMode is set to wep(1) and the corresponding instance
of dot11BssWepEncryptionMode is set to wep128(128).
OctetStringr/w
Constraints:
range: 13-13
 .1.3.6.1.4.1.4413.2.2.2.1.5.4.2.3.1.2
dot11BssWep128BitKeyStatus
The status of this conceptual row.

To create a row in this table, a manager must set this object to
either createAndGo(4) or createAndWait(5).

Until instances of all corresponding columns …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4413.2.2.2.1.5.4.2.3.1.3

dot11BssWpaTable

table
.1.3.6.1.4.1.4413.2.2.2.1.5.4.2.4 · 1 row entry · 3 columns
Open in standard view 
A table used to configure settings related to the WPA security modes.
dot11BssWpaEntry entry .1.3.6.1.4.1.4413.2.2.2.1.5.4.2.4.1
An entry defining the WPA characteristics of an individual service set.
A row exists in this table for each row in the dot11BssTable for which
dot11BssSecurityMode is set to wpaPsk(2), wpa2Psk(3), wpaEnterprise(4),
or …
Indexes
IF-MIBifIndex
Column Syntax OID
dot11BssWpaAlgorithm
Controls and reflects the WPA encryption mode used by the service set.
The WPA algorithm for WPA-PSK and WPA-Enterprise security mode is either
tkip(1) or aes(2).

The WPA algorithm for WPA2-PSK and WPA2…
Enumerationr/w
Enumerated Values:
1tkip
2aes
3tkipPlusAes
 .1.3.6.1.4.1.4413.2.2.2.1.5.4.2.4.1.1
dot11BssWpaPreSharedKey
Sets the WPA Pre-Shared Key (PSK) used by this service set. This
value MUST be either a 64 byte hexadecimal number, OR an 8 to 63
character ASCII string.
OctetStringr/w
Constraints:
range: 8-64
 .1.3.6.1.4.1.4413.2.2.2.1.5.4.2.4.1.2
dot11BssWpaGroupRekeyInterval
Sets the WPA Group Rekey Interval for this service set. If set to zero,
periodic rekeying is disabled for this service set.
secondsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4413.2.2.2.1.5.4.2.4.1.3

dot11BssRadiusTable

table
.1.3.6.1.4.1.4413.2.2.2.1.5.4.2.5 · 1 row entry · 5 columns
Open in standard view 
A table used to configure settings related to the RADIUS security 
modes, including WPA-Enterprise, WPA2-Enterprise and RADIUS-WEP.
dot11BssRadiusEntry entry .1.3.6.1.4.1.4413.2.2.2.1.5.4.2.5.1
An entry defining the RADIUS characteristics of an individual service
set. A row exists in this table for each row in the dot11BssTable
for which dot11BssSecurityMode is set to wpaEnterprise(4),
wpa2Enterprise(5), o…
Indexes
IF-MIBifIndex
Column Syntax OID
dot11BssRadiusAddressType
The type of internet address used for dot11BssRadiusAddress.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.4413.2.2.2.1.5.4.2.5.1.1
dot11BssRadiusAddress
The internet address of the RADIUS server for this service set.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4413.2.2.2.1.5.4.2.5.1.2
dot11BssRadiusPort
The UDP port used to communicate with the RADIUS server for this
service set.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4413.2.2.2.1.5.4.2.5.1.3
dot11BssRadiusKey
The RADIUS key.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4413.2.2.2.1.5.4.2.5.1.4
dot11BssRadiusReAuthInterval
The network re-authentication interval. If set to zero, no
re-authentication will be performed.
secondsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4413.2.2.2.1.5.4.2.5.1.5

dot11BssAccessTable

table
.1.3.6.1.4.1.4413.2.2.2.1.5.4.3.1 · 1 row entry · 3 columns
Open in standard view 
A table of MAC addresses which defines the MAC address based access 
restrictions for the system.
dot11BssAccessEntry entry .1.3.6.1.4.1.4413.2.2.2.1.5.4.3.1.1
A row in the table which specifies a single MAC address for a given
service set.
Indexes
IF-MIBifIndex dot11BssAccessIndex
Column Syntax OID
dot11BssAccessIndex
Indicates the instance of this table row.
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.4413.2.2.2.1.5.4.3.1.1.1
dot11BssAccessStation
A MAC address of a station which will be allowed to connect to the
service set if dot11BssAccessMode is set to restrictToList(2), or
forbidden if dot11BssAccessMode is set to denyList(3).
SNMPv2-TCPhysAddressr/w
Textual Convention: SNMPv2-TCPhysAddress OctetString
 .1.3.6.1.4.1.4413.2.2.2.1.5.4.3.1.1.2
dot11BssAccessStatus
The status of this conceptual row.

To create a row in this table, a manager must set this object to
either createAndGo(4) or createAndWait(5).

Until instances of all corresponding columns …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4413.2.2.2.1.5.4.3.1.1.3