BIANCA-BRICK-IMA-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
14

imaGroupTable

table
.0.1 · 1 row entry · 14 columns
Open in standard view 
The IMA Group Configuration table.
imaGroupEntry entry .0.1.1
An entry in the IMA Group table.
Indexes
imaGroupIndex
Column Syntax OID
imaGroupIndex
A unique value for the IMA Group.
Integer32
Constraints:
range: 1-2147483647
 .0.1.1.1
imaGroupSymmetry
Symmetry of the IMA group.
ImaGroupSymmetryr/w
Textual Convention: ImaGroupSymmetry Enumeration
Type Values:
1symmetricOperation
2asymmetricOperation
3asymmetricConfiguration
 .0.1.1.7
imaGroupMinNumTxLinks
Minimum number of transmit links required to be Active for
the IMA group to be in the Operational state.
Integer32r/w
Constraints:
range: 1-32
 .0.1.1.8
imaGroupMinNumRxLinks
Minimum number of receive links required to be Active for
the IMA group to be in the Operational state.
Integer32r/w
Constraints:
range: 1-32
 .0.1.1.9
imaGroupTxFrameLength
The frame length to be used by the IMA group in the transmit
direction. Can only be set when the IMA group is startup.
ImaFrameLengthr/w
Textual Convention: ImaFrameLength Enumeration
Type Values:
32m32
64m64
128m128
256m256
 .0.1.1.17
imaGroupDiffDelayMax
The maximum number of milliseconds of differential delay among
the links that will be tolerated on this interface.
MilliSecondsr/w
Textual Convention: MilliSeconds Integer32
 .0.1.1.19
imaGroupAlphaValue
This indicates the 'alpha' value used to specify the number
of consecutive invalid ICP cells to be detected before moving
to the IMA Hunt state from the IMA Sync state.
Integer32r/w
Constraints:
range: 1-2
 .0.1.1.22
imaGroupBetaValue
This indicates the 'beta' value used to specify the number
of consecutive errored ICP cells to be detected before moving
to the IMA Hunt state from the IMA Sync state.
Integer32r/w
Constraints:
range: 1-5
 .0.1.1.23
imaGroupGammaValue
This indicates the 'gamma' value used to specify the number
of consecutive valid ICP cells to be detected before moving
to the IMA Sync state from the IMA PreSync state.
Integer32r/w
Constraints:
range: 1-5
 .0.1.1.24
imaGroupErrorsLinkDown
This indicates the threshold of the number of ATM header
errors per 100000 ATM cells, at which a link is inhibited.
The number is compared with average value of received
ATM header errors in the last time. The length …
Integer32r/w
Constraints:
range: 0-100000
 .0.1.1.25
imaGroupErrorIntervalLinkDown
This indicates the duration of the measure interval in
seconds for the ATM header error counter. That is used
for calculating an average, which is then compared with the
imaGroupErrorsLinkDown value.
Integer32r/w
Constraints:
range: 15-3600
 .0.1.1.26
imaGroupErrorsLinkUp
This indicates the threshold of the number of ATM header
errors per 100000 ATM cells, at which a link is enabled again.
The number is compared with average value of received
ATM header errors in the last time. The len…
Integer32r/w
Constraints:
range: 0-100000
 .0.1.1.27
imaGroupErrorIntervalLinkUp
This indicates the duration of the measure interval in
seconds for the ATM header error counter. That is used
for calculating an average, which is then compared with the
imaGroupErrorsLinkUp value.
Integer32r/w
Constraints:
range: 15-3600
 .0.1.1.28
imaGroupMinLinkDownTime
This indicates the minimum waiting time in seconds before
a link can be enabled again, after it has been inhibited.
Integer32r/w
Constraints:
range: 0-3600
 .0.1.1.29