BGP4-V2-MIB-JUNIPER Table View

Table of supported BGP versions.

The supported BGP authentication mechanisms.

Table of supported BGP-4 capabilities.

BGP peer table.
          
This table contains, one entry per remote BGP peer,
any information about the connections with the remote
BGP peers.

On a per peer basis, this table reflects the last
protocol-defined error encountered and reported on
the peer session.  If no entry for a given peer,
by its jnxBgpM2PeerIndex, exists in this table, then no
such errors have been observed, reported, and
recorded on the  session.

BGP peer authentication table.
          
This table contains, one entry per BGP peer,
information about the authentication with BGP peers.

A table reporting the per-peering session amount
of time elapsed and update events since the peering
session advanced into the Established state.

Per peer management data on BGP session timers.

Current values of per-peer timers which can be
dynamically set in the jnxBgpM2PeerConfiguredTimersTable.
Values reflected in this table are the current
operational values, after negotiation from values
derived from initial configuration or last set from
jnxBgpM2PeerConfiguredTimersTable row instances.

This table contains the capabilities
that are supported for a given peer.

This table contains the capabilities
that are supported for a given peer.

The counters associated with a BGP Peer.

Additional per-peer, per AFI SAFI counters for prefixes

Table of route reflection client settings on a per-peer
basis.

Table of confederation member settings on a per-peer
basis.

Table containing rows for administratively starting and
stopping peering sessions.

BGP configuration peer table.
          
This table allows the configuration of the parameters
for a session with a BGP peer.
          
+++wayne provide description of how config should be done
for a peer per table.

Table contain per peer configuration for BGP Authentication.

Table for configuration of per-peer timers.

Table of route reflection client settings on a per-peer
basis.

Table of confederation member settings on a per-peer
basis.

The BGP-4 Received Path Attribute Table contains
information about paths to destination networks
received from all BGP4 peers.  Collectively, this
represents the Adj-Ribs-In.  The route where
jnxBgpM2NlriBest is TRUE represents, for this NLRI,
the route that is installed in the LocRib from the
Adj-Ribs-In.

This table contains on a per-peer basis one or more
routes from the jnxBgpM2NlriTable that have been
placed in this peer's Adj-Ribs-Out.

Provides per advertised network-prefix attribute data,
as advertised over a peering session.

This table is present for BGP speakers that support
the AS 4byte specification and are functioning as
a router between 2-byte and 4-byte AS space.

The BGP-4 Path Attribute AS Path Table
contains the per network path (NLRI)
AS PATH data received from the
advertising BGP peer.

The BGP-4 Path Attribute Unknown Table
contains the per network path (NLRI)
data on the path attributes advertised
with a route but not known to the local BGP implementation
or not otherwise capable of being returned from this agent.
          
The absence of row data for a given index value for
jnxBgpM2PathAttrIndex indicates a lack of such unknown
attribute information for the indicated network path
(as indexed by that jnxBgpM2PathAttrIndex value in the
jnxBgpM2PathAttrTable).

The BGP-4 Path Attribute Community Table
contains the per network path (NLRI)
data on the community membership advertised
with a route.  The absence of row
data for a given index value for jnxBgpM2PathAttrIndex
indicates a lack of this attribute information
for the indicated network path (as indexed by
that jnxBgpM2PathAttrIndex value in the jnxBgpM2PathAttrTable).

Table of link local nexthops as sent by RFC 2545
for IPv6 BGP Speakers.

Per prefix data pertinent to advertisement of a
network prefix through an originator.

The BGP-4 Path Attribute Cluster Table
contains the per network path (NLRI)
data on the reflection path which a
route has traversed.  The absence of row
data for a given index value for jnxBgpM2PathAttrIndex
indicates a lack of this attribute information
for the indicated network path (as indexed by
that jnxBgpM2PathAttrIndex value in the jnxBgpM2PathAttrTable).

The BGP-4 Path Attribute Community Table
contains the per network path (NLRI)
data on the extended community membership advertised
with a route.  The absence of row
data for a given index value for jnxBgpM2PathAttrIndex
indicates a lack of this attribute information
for the indicated network path (as indexed by
that jnxBgpM2PathAttrIndex value in the jnxBgpM2PathAttrTable).
          
XXX JMH - can not assign the OID until an RFC is published.