This notification is generated whenever the device saves
its configuration to non-volatile storage.  The system should
limit the frequency with which this notification is generated,
as frequent configuration changes could potentially generate
too many of these notifications.  How the frequency is limitted
is an implementation details, but it is suggested that no more
than one notification be generated per minute.

This notification is generated when an MLT port is enabled as
a result of an MLT trunk being disabled.

Generated when a port is disabled due to the loss of a VLACP PDU.

Generated when a port is enabled due to receipt of a VLACP PDU.

This notification is generated when the expected size of
a stack is not equal to the actual size of the stack.

This notification is generated when installation of a UBP
policy fails following EAP authentication.

This notification is generated to indicate that a trial license is
going to expire soon, or has already expired.

This notification is generated to indicate that a switch has
entered forced stack mode.

This notification is generated when the temperature of a chassis
component has exceeded some threshold.  The instance of s5ChasComType
included in the notification identifies the component.

This notification indicates that an Eap client MAC address was
authorized on a port, but the port could not be moved to the
Radius-Assigned VLAN.

This notification indicates that incoming traffic on a port
exceeded the rate limit settings on that port.

This notification is generated whenever an EAP access violation
occurs.

This notification indicates that the system has been up for 365 days.
In stack configuration, bayStackUnitConfigIndex specifies the unit number. 
For a standalone unit bayStackUnitConfigIndex is always 1.

This notification is triggered when an USB device is inserted.
In stack configuration, s5AgSysUsbTargetUnit specifies the unit number.
For standalone, s5AgSysUsbTargetUnit is always 0.

This notification is triggered when an USB device is removed.
In stack configuration, s5AgSysUsbTargetUnit specifies the unit number.
For standalone, s5AgSysUsbTargetUnit is always 0.

This notification is triggered when an SFP module is inserted.

This notification is triggered when an SFP module is removed.

This notification is sent when RO password expired.

This notification is sent when RW password expired.

This notification is sent when a stack protection event occurs.
The event type is specified by the bsnStackProtectionEvent object.

This notification is sent when a script has been run.
It indicates whether the execution was successful or not.

A bsnAaaUserAccountNotUsed trap signifies that
a user account has never been used during a time interval.

This notification is generated when a speed or duplex mismatch
is detected. Once notification has been sent, further notifications
may be sent, but it is suggested these be at least 5 minutes apart.

A bsnAaaAlreadyConnected trap signifies that
a user is already connected while he attempts to connect again.

A bsnAaaIncorrectLogOnThresholdExceeded trap signifies that
the threshold for incorrect user-entered information is exceeded.

A bsnAaaMaxNoOfSessionsExceeded trap signifies that the maxim
number of current sessions for an AAA user account is exceeded.

A bsnAuditUnsentMessages trap signifies that the number 
of audit unsent messages has reached 50% from the total capacity.

A bsnAuditRecordEventsFailure trap signifies that security log fails 
to record the events that are required to be recorded.

A bsnAuditStartUpTrap trap signifies that the audit function starts up.

A bsnAuditStartUpTrap trap signifies that the audit function shuts down.

A bsnAaaUserPasswordExpired trap signifies that the password stored
for an AAA user account has expired.

This notification is generated whenever an EAP access violation
occurs. Will replace bsnEapAccessViolation for 802.1X/2010.

This notification indicates that an Eap client MAC address was
authorized on a port, but the port could not be moved to the
Radius-Assigned VLAN. Will replace bsnEapRAVError for 802.1X/2010.

This notification is generated by a stackable system when the stack
manager detects a problem with a link between stack members.

A bsnAuditStorageAlarm trap signifies that the audit storage has
reached 75% of its capacity.

This notification is sent when the value of s5AgSnmpMaxPktSize has changed.

A bsnAaaUserPasswordAgingTrap trap signifies the amount of time left until password expiries for an AAA user account.
This is an informational trap and its generation is recurrent.

A bsnAaaUserAccountInactivityTrap trap signifies the amount of time left until the user account is disabled due to inactivity.
This is an informational trap and its generation is recurrent.

This notification is generated when the creation of a RADIUS Dynamic UBP
policy fails following EAP/NEAP authentication.

This notification is generated when the last trunk is occupied out 
of a limited number of trunks that can be created. The condition usually 
occurs because a system has some hardware or software limit on the number 
of trunks that can be created.

This notification is generated when an attempt to login to the
system fails as a result of an incorrect password.

This notification is generated when a receiving switch does not
receive an expected number of autotopology frames on an MLT in a
given time interval from the sending switch(es) on the other end
of the MLT. Once notification has been sent, further notifications
may be sent, but it is suggested these be at least 5 minutes apart.
The ifAdminStatus object reflects the state of the port. The port
may be partitioned by the switch or still be active depending on
the detection algorithm's control parameters.

This notification is generated when an MLT port is disabled as
a result of an MLT trunk being disabled.

This notification is generated when a LAG port that was port of
a trunk is disabled as a result of the LAC setting on the port
being turned off.