BAY-STACK-LLDP-EXT-DOT3-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
10

bsLldpXdot3LocPowerTable

table
.1.3.6.1.4.1.45.5.47.1.2.1 · 1 row entry · 5 columns
Open in standard view 
This table contains one row per port of PSE PoE
information on the local system known to this agent.
bsLldpXdot3LocPowerEntry entry .1.3.6.1.4.1.45.5.47.1.2.1.1
Information about a particular port PoE information.
Indexes
No indexes recorded
Column Syntax OID
bsLldpXdot3LocPowerType
A GET attribute that returns whether the local system is a PSE or
a PD and whether it is Type 1 or Type 2.
Enumeration
Enumerated Values:
1type2pse
2type2pd
3type1pse
4type1pd
 .1.3.6.1.4.1.45.5.47.1.2.1.1.1
bsLldpXdot3LocPowerSource
A GET attribute indicating the PSE Power Sources of the local system.
A PSE indicates whether it is being powered by a primary power
source; a backup power source; or unknown.

A value primaryPs(2) indicat…
Enumeration
Enumerated Values:
1unknown
2primaryPs
3backupPs
4reserved
 .1.3.6.1.4.1.45.5.47.1.2.1.1.2
bsLldpXdot3LocPowerPriority
Reflects the PD power priority that is being advertised on this
PSE port.

If both locally configure priority and
ldpXMedRemXPoEPDPowerPriority are available on this port, it is
a matter of local policy wh…
Enumeration
Enumerated Values:
1unknown
2critical
3high
4low
 .1.3.6.1.4.1.45.5.47.1.2.1.1.3
bsLldpXdot3LocPDRequestedPowerValue
A GET attribute that returns the PD requested power value. For a PSE,
it is the power value that the PSE mirrors back to the remote system.
This is the PD requested power value that was used by the PSE to
compute the po…
tenth of wattInteger32
Constraints:
range: 1-255
 .1.3.6.1.4.1.45.5.47.1.2.1.1.4
bsLldpXdot3LocPSEAllocatedPowerValue
A GET attribute that returns the PSE allocated power value. For a PSE,
it is the power value that the PSE has currently allocated to the
remote system. The PSE allocated power value is the maximum input
average power t…
tenth of wattInteger32
Constraints:
range: 1-255
 .1.3.6.1.4.1.45.5.47.1.2.1.1.5

bsLldpXdot3RemPowerTable

table
.1.3.6.1.4.1.45.5.47.1.3.1 · 1 row entry · 5 columns
Open in standard view 
This table contains information about the PoE device type
as advertised by the remote system.
bsLldpXdot3RemPowerEntry entry .1.3.6.1.4.1.45.5.47.1.3.1.1
Information about a particular port component.
Indexes
No indexes recorded
Column Syntax OID
bsLldpXdot3RemPowerType
A GET attribute that returns whether the remote system is a PSE
or a PD and whether it is Type 1 or Type 2.
Enumeration
Enumerated Values:
1type2pse
2type2pd
3type1pse
4type1pd
 .1.3.6.1.4.1.45.5.47.1.3.1.1.1
bsLldpXdot3RemPowerSource
A GET attribute that returns the power sources of the remote system.
When the remote system is a PD, it indicates whether it is being
powered by: a PSE and locall; locally only; by a PSE only; or unknown.
Enumeration
Enumerated Values:
1unknown
2pse
3reserved
4pseAndLocal
 .1.3.6.1.4.1.45.5.47.1.3.1.1.2
bsLldpXdot3RemPowerPriority
A GET operation returns the priority of the PD system received from
the remote system. For a PD, this is the priority that the remote
system has assigned to the PD.
Enumeration
Enumerated Values:
1unknown
2critical
3high
4low
 .1.3.6.1.4.1.45.5.47.1.3.1.1.3
bsLldpXdot3RemPDRequestedPowerValue
A GET attribute that for a PSE returs the the PD requested power value
received from the remote system. It is expressed in units of 0.1 watts.
tenth of wattInteger32
Constraints:
range: 1-255
 .1.3.6.1.4.1.45.5.47.1.3.1.1.4
bsLldpXdot3RemPSEAllocatedPowerValue
A GET attribute that for a PSE returns the PSE allocated power value
that was used by the remote system to compute the power value that it
has currently requested from the PSE. It is expressed in units of
0.1 watts.
tenth of wattInteger32
Constraints:
range: 1-255
 .1.3.6.1.4.1.45.5.47.1.3.1.1.5