ARISTA-PHY-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
1
Rows
1
Columns
7
aristaPhyIntfTable
table.1.3.6.1.4.1.30065.3.37.1
·
1 row entry
·
7 columns
This table contains Layer1 telemetry for a given PHY line on a particular interface
This contains Layer1 telemetry for a given PHY line on a
particular interface
particular interface
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
aristaPhyIntfCapabilitiesMap
Bitmap representing which objects for a given
aristaPhyIntfEntry are supported. The values defined here correspond to the objects aristaPhyIntfPcsBer, aristaPhyIntfPreFecBer and aristaPhyIntfFecUncorrectedCodewords resp… |
Bits Enumerated Values:
|
.1.3.6.1.4.1.30065.3.37.1.1.1 |
||||||||||||||||||
|
aristaPhyIntfPcsBer
Number of bit errors seen in the post-FEC bit stream. If
forward error correction is not enabled on the link, then this is the raw bit error value. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.30065.3.37.1.1.2 |
||||||||||||||||||
|
aristaPhyIntfPreFecBer
The value for the ratio of error bits to total bits seen in
the pre-FEC bitstream. This indicates the rate of bits seen before forward error correction is applied to the bit stream. This should be used in… |
L1TelemetryValue Textual Convention: L1TelemetryValue Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.30065.3.37.1.1.3 |
||||||||||||||||||
|
aristaPhyIntfPreFecBerPrecision
The value that represents the precision for the
aristaPhyIntfPreFecBer value. This should be used together with aristaPhyIntfPreFecBer and aristaPhyIntfPreFecBerScale to obtain the final calculated pre-FEC BER value. |
L1TelemetryPrecision Textual Convention: L1TelemetryPrecision Integer32Type Constraints: range: -9..9 |
.1.3.6.1.4.1.30065.3.37.1.1.4 |
||||||||||||||||||
|
aristaPhyIntfPreFecBerDataScale
The value that represents the data scaling factor, represented
with an International System of Units (SI) prefix. The actual data units are determined by examining an object of this type together with the associated ar… |
L1TelemetryDataScale Textual Convention: L1TelemetryDataScale EnumerationType Values:
|
.1.3.6.1.4.1.30065.3.37.1.1.5 |
||||||||||||||||||
|
aristaPhyIntfFecUncorrectedCodewords
The number of codewords that the forward error correction
algorithm could not correct. The presence of these values indicates an unhealthy link, and invalidates the aristaPhyIntfPreFecBer value. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.30065.3.37.1.1.6 |
||||||||||||||||||
|
aristaPhyIntfStateChangeCount
The number of times a given PHY link has transitioned
between different states. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.30065.3.37.1.1.7 |