ARICENT-LLDP-MED-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

fsLldpMedPortConfigTable

table

.1.3.6.1.4.1.29601.2.101.1.1 · 1 row entry · 2 columns

Open in standard view

This table controls the selection of LLDP-MED TLVs to be transmitted
on individual ports.

fsLldpMedPortConfigEntry entry .1.3.6.1.4.1.29601.2.101.1.1.1

This object specifies the LLDP-MED configuration information that controls the
transmission of the MED organizationally defined TLVs on
LLDP transmission capable ports.

This object augments the lldpV2PortCo…

Indexes

No indexes recorded

Column Syntax OID

fsLldpMedPortCapSupported

This object specifies the bitmap that includes the MED
organizationally defined a set of LLDP
TLVs whose transmission is possible for the respective port
on the LLDP agent of the device. Each bit in the bitmap correspo…

LLDP-EXT-MED-MIBLldpXMedCapabilities

Textual Convention: LLDP-EXT-MED-MIBLldpXMedCapabilities Bits

Type Values:

0	capabilities
1	networkPolicy
2	location
3	extendedPSE
4	extendedPD
5	inventory

.1.3.6.1.4.1.29601.2.101.1.1.1.1

fsLldpMedPortConfigTLVsTxEnable

This object includes the MED organizationally defined a set of LLDP
TLVs whose transmission is allowed on the local LLDP agent by
the network management. Each bit in the bitmap corresponds
to an LLDP-MED subtype associ…

LLDP-EXT-MED-MIBLldpXMedCapabilitiesr/w

Textual Convention: LLDP-EXT-MED-MIBLldpXMedCapabilities Bits

Type Values:

0	capabilities
1	networkPolicy
2	location
3	extendedPSE
4	extendedPD
5	inventory

.1.3.6.1.4.1.29601.2.101.1.1.1.2

fsLldpMedLocMediaPolicyTable

table

.1.3.6.1.4.1.29601.2.101.1.2 · 1 row entry · 7 columns

Open in standard view

This table contains one row per policy type per port
of media policy information (as a part of the MED
organizational extension) on the local system known
to this agent.

fsLldpMedLocMediaPolicyEntry entry .1.3.6.1.4.1.29601.2.101.1.2.1

This object specifies information about a particular policy on a specific
port component.

Indexes

LLDP-V2-MIBlldpV2LocPortIfIndex fsLldpMedLocMediaPolicyAppType

Column Syntax OID

fsLldpMedLocMediaPolicyAppType

This object specifies the media type that defines the primary function of the
application for the policy advertised by an endpoint.

LLDP-EXT-MED-MIBPolicyAppType

Textual Convention: LLDP-EXT-MED-MIBPolicyAppType Bits

Type Values:

0	unknown
1	voice
2	voiceSignaling
3	guestVoice
4	guestVoiceSignaling
5	softPhoneVoice
6	videoconferencing
7	streamingVideo
8	videoSignaling

.1.3.6.1.4.1.29601.2.101.1.2.1.1

fsLldpMedLocMediaPolicyVlanID

This object specifies an extension of the VLAN Identifier for the port,
as defined in IEEE 802.1P-1998.

A value of 1 through 4094 is used to define a valid PVID.

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.29601.2.101.1.2.1.2

fsLldpMedLocMediaPolicyPriority

This object contains the value of the 802.1p priority
which is associated with the given port on the
local system.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.29601.2.101.1.2.1.3

fsLldpMedLocMediaPolicyDscp

This object contains the value of the Differentiated Service
Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475
which is associated with the given port on the local system.

Integer32r/w

Constraints:
range: 0-64

.1.3.6.1.4.1.29601.2.101.1.2.1.4

fsLldpMedLocMediaPolicyUnknown

This object indicates that the
network policy for the specified application type is
currently unknown when the value is set as 'true'. In this case, the VLAN ID, the
layer 2 priority and the DSCP value fields are ignor…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.29601.2.101.1.2.1.5

fsLldpMedLocMediaPolicyTagged

This object indicates that the application is using a
tagged VLAN when the value set as 'true'.
This object indicates that for the specific application
the device either is using an untagged VLAN or does not
support po…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.29601.2.101.1.2.1.6

fsLldpMedLocMediaPolicyRowStatus

This object creates, modifies, and/or deletes a row
in the table. All the objects in a row can be modified
only when the value of this object in the corresponding
conceptual row is not 'active'. To modify one or
more…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.29601.2.101.1.2.1.7

fsLldpMedLocLocationTable

table

.1.3.6.1.4.1.29601.2.101.1.3 · 1 row entry · 1 columns

Open in standard view

This table specifies the augmented MIB of lldpXMedLocLocationTable.
Currently, this MIB table contains Row Status object to control
the creation, deletion and modification of each row in lldpXMedLocLocationTable.

The information in this table MUST be stored in non-volatile-memory
and persist over restart/reboot sequences.

fsLldpMedLocLocationEntry entry .1.3.6.1.4.1.29601.2.101.1.3.1

This object is used to augment the lldpXMedLocLocationEntry of
the LLDP-EXT-MED-MIB, therefore it is only present along with the location
configuration defined by the associated lldpXMedLocLocationEntry
entry.

Indexes

No indexes recorded

Column Syntax OID

fsLldpMedLocLocationRowStatus

This object is used to create, modify, and/or delete a row
in the table. All the objects in a row can be modified
only when the value of this object in the corresponding
conceptual row is not 'active'. To modify one o…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.29601.2.101.1.3.1.1

fsLldpXMedRemCapabilitiesTable

table

.1.3.6.1.4.1.29601.2.101.2.1 · 1 row entry · 3 columns

Open in standard view

This table displays LLDP-MED capabilities of remote devices
connected to individual ports.

fsLldpXMedRemCapabilitiesEntry entry .1.3.6.1.4.1.29601.2.101.2.1.1

This object specifies LLDP-MED capabilities of remote devices connected to the device
ports and communicating via LLDP-MED.

The remote tables in the LLDP-MED MIB excepting this table may be
sparsely populat…

Indexes

LLDP-V2-MIBlldpV2RemTimeMark LLDP-V2-MIBlldpV2RemLocalIfIndex LLDP-V2-MIBlldpV2RemLocalDestMACAddress LLDP-V2-MIBlldpV2RemIndex

Column Syntax OID

fsLldpXMedRemCapSupported

This object specifies the bitmap that includes the MED
organizationally defined a set of LLDP
TLVs whose transmission is possible on the LLDP agent of the remote
device connected to this port. Each bit in the bitmap cor…

LLDP-EXT-MED-MIBLldpXMedCapabilities

Textual Convention: LLDP-EXT-MED-MIBLldpXMedCapabilities Bits

Type Values:

0	capabilities
1	networkPolicy
2	location
3	extendedPSE
4	extendedPD
5	inventory

.1.3.6.1.4.1.29601.2.101.2.1.1.1

fsLldpXMedRemCapCurrent

LLDP-EXT-MED-MIBLldpXMedCapabilities

Textual Convention: LLDP-EXT-MED-MIBLldpXMedCapabilities Bits

Type Values:

0	capabilities
1	networkPolicy
2	location
3	extendedPSE
4	extendedPD
5	inventory

.1.3.6.1.4.1.29601.2.101.2.1.1.2

fsLldpXMedRemDeviceClass

This object specifies a device Class as advertised by the device remotely connected to the
port.

LLDP-EXT-MED-MIBLldpXMedDeviceClass

Textual Convention: LLDP-EXT-MED-MIBLldpXMedDeviceClass Enumeration

Type Values:

0	notDefined
1	endpointClass1
2	endpointClass2
3	endpointClass3
4	networkConnectivity

.1.3.6.1.4.1.29601.2.101.2.1.1.3

fsLldpXMedRemMediaPolicyTable

table

.1.3.6.1.4.1.29601.2.101.2.2 · 1 row entry · 6 columns

Open in standard view

This table contains media policy information as advertised
by the remote system.
          
This table may be sparsely populated. Entries in this table are
relevant only if the networkPolicy(0) bits in the
fsLldpXMedRemCapSupported and fsLldpXMedRemCapCurrent objects of the
corresponding ports are set.

fsLldpXMedRemMediaPolicyEntry entry .1.3.6.1.4.1.29601.2.101.2.2.1

This object specifies information about the per port per policy type policy
information for a particular physical network connection.

Indexes

LLDP-V2-MIBlldpV2RemTimeMark LLDP-V2-MIBlldpV2RemLocalIfIndex LLDP-V2-MIBlldpV2RemLocalDestMACAddress LLDP-V2-MIBlldpV2RemIndex fsLldpXMedRemMediaPolicyAppType

Column Syntax OID

fsLldpXMedRemMediaPolicyAppType

This object specifies the media type that defines the primary function of the
application for the policy advertised by the endpoint connected
remotely to this port.

LLDP-EXT-MED-MIBPolicyAppType

Textual Convention: LLDP-EXT-MED-MIBPolicyAppType Bits

Type Values:

0	unknown
1	voice
2	voiceSignaling
3	guestVoice
4	guestVoiceSignaling
5	softPhoneVoice
6	videoconferencing
7	streamingVideo
8	videoSignaling

.1.3.6.1.4.1.29601.2.101.2.2.1.1

fsLldpXMedRemMediaPolicyVlanID

This object specifies an extension of the VLAN Identifier for the remote system
connected to this port, as defined in IEEE 802.1P-1998.

A value of 1 through 4094 is used to define a valid PVID.

Integer32

Constraints:
range: 0-4095

.1.3.6.1.4.1.29601.2.101.2.2.1.2

fsLldpXMedRemMediaPolicyPriority

This object contains the value of the 802.1p priority
which is associated with the remote system connected at
given port.

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.29601.2.101.2.2.1.3

fsLldpXMedRemMediaPolicyDscp

This object contains the value of the Differentiated Service
Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475
which is associated with remote system connected at the port.

Integer32

Constraints:
range: 0-64

.1.3.6.1.4.1.29601.2.101.2.2.1.4

fsLldpXMedRemMediaPolicyUnknown

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.29601.2.101.2.2.1.5

fsLldpXMedRemMediaPolicyTagged

This object indicates that the application is using a
tagged VLAN when the value is set as 'true'.
This object indicates that for the specific application
the device either is using an untagged VLAN or does not
support …

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.29601.2.101.2.2.1.6

fsLldpXMedRemInventoryTable

table

.1.3.6.1.4.1.29601.2.101.2.3 · 1 row entry · 7 columns

Open in standard view

This table contains inventory information as advertised
by the remote system.
          
This table may be sparsely populated. Entries in this table are
relevant only if the inventory(2) bits in the
fsLldpXMedRemCapSupported and fsLldpXMedRemCapCurrent objects of the
corresponding ports are set

fsLldpXMedRemInventoryEntry entry .1.3.6.1.4.1.29601.2.101.2.3.1

This object specifies information about inventory information for the remote devices
connected to the ports.

Indexes

LLDP-V2-MIBlldpV2RemTimeMark LLDP-V2-MIBlldpV2RemLocalIfIndex LLDP-V2-MIBlldpV2RemLocalDestMACAddress LLDP-V2-MIBlldpV2RemIndex

Column	Syntax	OID
fsLldpXMedRemHardwareRev This object specifies the vendor-specific hardware revision string as advertised by the remote endpoint.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.29601.2.101.2.3.1.1`
fsLldpXMedRemFirmwareRev This object specifies the vendor-specific firmware revision string as advertised by the remote endpoint.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.29601.2.101.2.3.1.2`
fsLldpXMedRemSoftwareRev This object specifies the vendor-specific software revision string as advertised by the remote endpoint.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.29601.2.101.2.3.1.3`
fsLldpXMedRemSerialNum This object specifies the vendor-specific serial number as advertised by the remote endpoint.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.29601.2.101.2.3.1.4`
fsLldpXMedRemMfgName This object specifies the vendor-specific manufacturer name as advertised by the remote endpoint.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.29601.2.101.2.3.1.5`
fsLldpXMedRemModelName This object specifies the vendor-specific model name as advertised by the remote endpoint.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.29601.2.101.2.3.1.6`
fsLldpXMedRemAssetID This object specifies the vendor-specific asset tracking identifier as advertised by the remote endpoint.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.29601.2.101.2.3.1.7`

fsLldpXMedRemLocationTable

table

.1.3.6.1.4.1.29601.2.101.2.4 · 1 row entry · 1 columns

Open in standard view

This table contains Location information as advertised
by the remote system.
          
This table may be sparsely populated. Entries in this table are
relevant only if the Location(3) bits in the
fsLldpXMedRemCapSupported and fsLldpXMedRemCapCurrent objects of the
corresponding ports are set.

fsLldpXMedRemLocationEntry entry .1.3.6.1.4.1.29601.2.101.2.4.1

This object specifies information about Location information
for the remote devices connected to the ports.

Indexes

LLDP-V2-MIBlldpV2RemTimeMark LLDP-V2-MIBlldpV2RemLocalIfIndex LLDP-V2-MIBlldpV2RemLocalDestMACAddress LLDP-V2-MIBlldpV2RemIndex LLDP-EXT-MED-MIBlldpXMedRemLocationSubtype

Column	Syntax	OID
fsLldpXMedRemLocationInfo This object specifies the location information advertised by the remote endpoint. Parsing of this information is dependent upon the location subtype, as defined by the value of the corresponding fsLldpXMedRemLocation…	OctetString Constraints: `range: 0-256`	`.1.3.6.1.4.1.29601.2.101.2.4.1.1`

fsLldpXMedRemXPoEPDTable

table

.1.3.6.1.4.1.29601.2.101.2.5 · 1 row entry · 4 columns

Open in standard view

This table contains extended PoE information as advertised
by the remote devices of PD type.
          
This table may be sparsely populated. Entries in this table are
relevant only if the extendedPD(5) bits in the
fsLldpXMedRemCapSupported and fsLldpXMedRemCapCurrent objects of the
corresponding ports are set.

fsLldpXMedRemXPoEPDEntry entry .1.3.6.1.4.1.29601.2.101.2.5.1

Information about XPoEPD information for the remote devices
connected to the ports.

Indexes

LLDP-V2-MIBlldpV2RemTimeMark LLDP-V2-MIBlldpV2RemLocalIfIndex LLDP-V2-MIBlldpV2RemLocalDestMACAddress LLDP-V2-MIBlldpV2RemIndex

Column Syntax OID

fsLldpXMedRemXPoEDeviceType

Defines the type of Power-via-MDI (Power over Ethernet) advertised
by the remote device.

A value pseDevice(2) indicates that the device is advertised as a
Power Sourcing Entity (PSE).

A val…

Enumeration

Enumerated Values:

1	unknown
2	pseDevice
3	pdDevice
4	none

.1.3.6.1.4.1.29601.2.101.2.5.1.1

fsLldpXMedRemXPoEPDPowerReq

This object contains the value of the power required by a
PD connected remotely to the port
expressed in units of 0.1 watts.

tenth of wattUnsigned32

Constraints:
range: 0-1023

.1.3.6.1.4.1.29601.2.101.2.5.1.2

fsLldpXMedRemXPoEPDPowerSource

This object specifies the type of Power Source advertised as being used
by the device connected remotely to the port.

A value fromPSE(2) indicates that the device advertises its power
source as received f…

Enumeration

Enumerated Values:

1	unknown
2	fromPSE
3	local
4	localAndPSE

.1.3.6.1.4.1.29601.2.101.2.5.1.3

fsLldpXMedRemXPoEPDPowerPriority

This object specifies the priority advertised as being required by the PD
connected remotely to the port.

A value critical(2) indicates that the device advertises its power
Priority as critical, as per RF…

Enumeration

Enumerated Values:

1	unknown
2	critical
3	high
4	low

.1.3.6.1.4.1.29601.2.101.2.5.1.4

fsLldpMedStatsTable

table

.1.3.6.1.4.1.29601.2.101.3.1 · 1 row entry · 16 columns

Open in standard view

This table containing LLDP MED transmission statistics for
individual port/destination address combinations.

fsLldpMedStatsEntry entry .1.3.6.1.4.1.29601.2.101.3.1.1

This object specifies LLDP MED frame transmission statistics for a particular port
and destination MAC address.

All counter values in a particular entry shall be
maintained on a continuing basis and shall n…

Indexes

fsLldpMedStatsIfIndex fsLldpMedStatsDestMACAddress

Column	Syntax	OID
fsLldpMedStatsIfIndex This object specifies the interface index value that is used to identify the port associated with this entry. Its value is an index into the interfaces MIB The value of this object is used as an index to …	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.29601.2.101.3.1.1.1`
fsLldpMedStatsDestMACAddress This object specifies the index value that is used to identify the destination MAC address associated with this entry. Its value identifies the row in the lldpV2DestAddressTable where the MAC address can be found. …	LLDP-V2-TC-MIBLldpV2DestAddressTableIndex Textual Convention: LLDP-V2-TC-MIBLldpV2DestAddressTableIndex `Unsigned32` Type Constraints: `range: 1..4096`	`.1.3.6.1.4.1.29601.2.101.3.1.1.2`
fsLldpMedStatsTxFramesTotal This object specifies the number of LLDP-MED frames transmitted by the LLDP agent on the indicated port to the destination MAC address associated with this row of the table.	LLDP framesSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.29601.2.101.3.1.1.3`
fsLldpMedStatsRxFramesTotal This object specifies the number of valid LLDP-MED frames received by the LLDP agent on the indicated port, while this LLDP agent is enabled.	LLDP framesSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.29601.2.101.3.1.1.4`
fsLldpMedStatsRxFramesDiscardedTotal This object specifies the number of LLDP-MED frames received by the LLDP agent on the indicated port, and then discarded for any reason. This counter can provide an indication that LLDP header formatting problems may ex…	LLDP framesSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.29601.2.101.3.1.1.5`
fsLldpMedStatsRxTLVsDiscardedTotal This object specifies the number of LLDP-MED TLVs discarded for any reason by the LLDP agent on the indicated port.	TLVsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.29601.2.101.3.1.1.6`
fsLldpMedStatsRxCapTLVsDiscarded This object specifies the number of LLDP MED Capability TLVs discarded for any reason by this LLDP agent on the indicated port.	TLVsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.29601.2.101.3.1.1.7`
fsLldpMedStatsRxPolicyTLVsDiscarded This object specifies the number of LLDP MED Network Policy TLVs discarded for any reason by this LLDP agent on the indicated port.	TLVsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.29601.2.101.3.1.1.8`
fsLldpMedStatsRxInventoryTLVsDiscarded This object specifies the number of LLDP MED Inventory TLVs discarded for any reason by this LLDP agent on the indicated port.	TLVsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.29601.2.101.3.1.1.9`
fsLldpMedStatsRxLocationTLVsDiscarded This object specifies the number of LLDP MED Location TLVs discarded for any reason by this LLDP agent on the indicated port.	TLVsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.29601.2.101.3.1.1.10`
fsLldpMedStatsRxExPowerMDITLVsDiscarded This object specifies the number of LLDP MED Extended Power Via MDI TLVs discarded for any reason by this LLDP agent on the indicated port.	TLVsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.29601.2.101.3.1.1.11`
fsLldpMedStatsRxCapTLVsDiscardedReason This object specifies the reason for last discarded LLDP MED Capability TLV	OctetString Constraints: `range: 0-255`	`.1.3.6.1.4.1.29601.2.101.3.1.1.12`
fsLldpMedStatsRxPolicyDiscardedReason This object specifies the reason for last discarded LLDP MED Network Policy TLV	OctetString Constraints: `range: 0-255`	`.1.3.6.1.4.1.29601.2.101.3.1.1.13`
fsLldpMedStatsRxInventoryDiscardedReason This object specifies the reason for last discarded LLDP MED Inventory TLV	OctetString Constraints: `range: 0-255`	`.1.3.6.1.4.1.29601.2.101.3.1.1.14`
fsLldpMedStatsRxLocationDiscardedReason This object specifies the reason for last discarded LLDP MED Location Identification TLV	OctetString Constraints: `range: 0-255`	`.1.3.6.1.4.1.29601.2.101.3.1.1.15`
fsLldpMedStatsRxExPowerDiscardedReason This object specifies the reason for last discarded LLDP MED Extended Power-via-MDI TLV	OctetString Constraints: `range: 0-255`	`.1.3.6.1.4.1.29601.2.101.3.1.1.16`