ARICENT-L2IPV6SNP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
40

fsIpv6SnpSystemTable

table
.1.3.6.1.4.1.29601.2.122.1.1 · 1 row entry · 4 columns
Open in standard view 
Switch context specific parameters for IPv6 control packet snooping related features in
Layer2 switch
fsIpv6SnpSystemEntry entry .1.3.6.1.4.1.29601.2.122.1.1.1
Each entry contains the fields ralated to RA-Guard feature enable/disable, traces
Indexes
fsIpv6SnpContexId
Column Syntax OID
fsIpv6SnpContexId
Identifies switch virtual context
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.29601.2.122.1.1.1.1
fsIpv6SnpSystemControl
The Administrative system control status of IPv6 control packet snooping module.
start : Indicates that all resource required for this module
are allocated. Configurations are allowed.
shutdown : Indicates that all res…
Enumerationr/w
Enumerated Values:
1start
2shutdown
 .1.3.6.1.4.1.29601.2.122.1.1.1.2
fsIpv6SnpRagStatus
Object to enable/disable the RA Guard feature in the switch instance
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.29601.2.122.1.1.1.3
fsIpv6SnpTraceLevel
This object is to enable/disable the trace statements in IPv6 control packet snooping module
The mapping between bit position and the level of trace is
as follows:

BIT 1 - Indicates all Traces
BIT 2 - Ind…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.122.1.1.1.4

fsIpv6SnpRagPolicyTable

table
.1.3.6.1.4.1.29601.2.122.2.1 · 1 row entry · 10 columns
Open in standard view 
This table contains policy match criteria to validate the legitimagte RA messages
fsIpv6SnpRagPolicyEntry entry .1.3.6.1.4.1.29601.2.122.2.1.1
Each entry contains the policy details.
Indexes
fsIpv6SnpRagPolicyId
Column Syntax OID
fsIpv6SnpRagPolicyId
Indicates the RA Guard Policy id.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.29601.2.122.2.1.1.1
fsIpv6SnpRagDeviceRole
Indicates the role of the device
host mode : All RA messages are disallowed and will be dropped
Rotuer mode: RA messages are validated against the policy.
Enumerationr/w
Enumerated Values:
1host
2router
 .1.3.6.1.4.1.29601.2.122.2.1.1.2
fsIpv6SnpRagMbit
Enables verification of the advertised 'managed address
configuration flag' to be on / off
None : Indicates that validation of this field in RA message will be bypassed.
Enumerationr/w
Enumerated Values:
0off
1on
2none
 .1.3.6.1.4.1.29601.2.122.2.1.1.3
fsIpv6SnpRagObit
Enables verification of the advertised 'other
configuration flag' to be on / off
None : Indicates that validation of this field in RA message will be bypassed.
Enumerationr/w
Enumerated Values:
0off
1on
2none
 .1.3.6.1.4.1.29601.2.122.2.1.1.4
fsIpv6SnpMatchRagAclId
Configures the access list for the policy entry which is used to validate the
source link layer address carried by RA message.
Value 0 indicates that no access list is associated to the policy entry.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.29601.2.122.2.1.1.5
fsIpv6SnpMatchRagPrefixListId
Configures the prefix list Id used to validate the
source ipv6 address prefixes carried by RA message.
Value 0 indicates that no IPV6 prefix list is associated to the policy entry.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.29601.2.122.2.1.1.6
fsIpv6SnpMatchRagSrcIp6ListId
Configures the Src Ip6 list Id used to validate the
source ipv6 address carried by RA message.
Value 0 indicates that no Src Ip6 list is associated to the policy entry.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.29601.2.122.2.1.1.7
fsIpv6SnpRagHopLimit
Value 0: Indicates that validation of this field in RA message will be bypassed
Enables the validation of advertised hoplimit carried by RA massage and the values will be as below
Value 255: Indicates that the received …
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.29601.2.122.2.1.1.8
fsIpv6SnpRagRouterPreference
Enables the validation of advertised router preference carried by RA massage to be low/medium/high.
None : Indicates that validation of this field in RA message will be bypassed
Enumerationr/w
Enumerated Values:
0medium
1high
2none
3low
 .1.3.6.1.4.1.29601.2.122.2.1.1.9
fsIpv6SnpRagPolicyRowStatus
This object is used to create or delete the entry in the RAG policy table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.29601.2.122.2.1.1.10

fsIpv6SnpRagACLTable

table
.1.3.6.1.4.1.29601.2.122.2.2 · 1 row entry · 4 columns
Open in standard view 
This table contains access list information to be 
set as match criteria in the RA Guard policy table 
to validate the incoming RA message
fsIpv6SnpRagAclEntry entry .1.3.6.1.4.1.29601.2.122.2.2.1
Each entry contains the information about access list
Indexes
fsIpv6SnpRagAclNo fsIpv6SnpRagAclEntryNo
Column Syntax OID
fsIpv6SnpRagAclNo
Indicates the acl number for this entry.
This acl number can be mapped to RA Guard policy entry to configure the matching criteria for the policy entry.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.29601.2.122.2.2.1.1
fsIpv6SnpRagAclEntryNo
Indicates an entry associated with the acl number.
For a single acl number, many entries can be created. Thus several MAC addresses can be associated to
an acl number.
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.29601.2.122.2.2.1.2
fsIpv6SnpRagAclSrcMacAddress
Indicates the source Mac address associated with the acl-id.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.29601.2.122.2.2.1.3
fsIpv6SnpRagAclRowStatus
This object is used to create or delete entry in the RA guard acl table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.29601.2.122.2.2.1.4

fsipv6SnpRagPrefixListTable

table
.1.3.6.1.4.1.29601.2.122.2.3 · 1 row entry · 7 columns
Open in standard view 
This table contains Ipv6 address Prefix list information that can be  
set as match criteria in the RA Guard policy entry.
This can be used for validating the ipv6 address prefixes carried by incoming RA messages.
fsIpv6SnpRagPrefixListEntry entry .1.3.6.1.4.1.29601.2.122.2.3.1
Each entry contains the Ipv6 address Prefixes used to validate the prefix information
carried in RA messages.
Indexes
fsIpv6SnpRagPrefixListNo fsIpv6SnpRagPrefixListEntryNo
Column Syntax OID
fsIpv6SnpRagPrefixListNo
Indicates the Prefix-list number of this entry.
This prefix-list number can be mapped to RA Guard policy entry to configure the matching criteria for the policy entry.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.29601.2.122.2.3.1.1
fsIpv6SnpRagPrefixListEntryNo
Indicates entry number for each prefix.
For a single prefix-list number, many entries can be created. Thus several prefixes can be associated to
a prefix-list number.
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.29601.2.122.2.3.1.2
fsIpv6SnpRagPrefixListPrefix
Ipv6 prefix value of this entry.
Ipv6AddressPrefixr/w
Textual Convention: Ipv6AddressPrefix OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.29601.2.122.2.3.1.3
fsIpv6SnpRagPrefixListLength
Indicates prefix length for each Ipv6 prefix
Integer32r/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.29601.2.122.2.3.1.4
fsIpv6SnpRagPrefixListGe
Minimum prefix length to be matched
Value 0 indicates that no miminum prefix lenth, and this check would be bypassed
Integer32r/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.29601.2.122.2.3.1.5
fsIpv6SnpRagPrefixListLe
Maximum prefix length to be matched
Value 0 indicates that no maximum prefix lenth, and this check would be bypassed
Integer32r/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.29601.2.122.2.3.1.6
fsIpv6SnpRagPrefixListRowStatus
This object is used to create or delete entry in the prefix list table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.29601.2.122.2.3.1.7

fsIpv6SnpRagPortTable

table
.1.3.6.1.4.1.29601.2.122.2.4 · 1 row entry · 10 columns
Open in standard view 
This table contains RA Guard interface specific configurations.
fsIpv6SnpRagPortEntry entry .1.3.6.1.4.1.29601.2.122.2.4.1
Each row in this table contains the RA guard configuration information for
the interface.
Indexes
fsIpv6SnpRagPortNumber
Column Syntax OID
fsIpv6SnpRagPortNumber
Indicates the inteface index for which RA guard configurations are applied.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.29601.2.122.2.4.1.1
fsIpv6SnpRagPortStatus
Object to enable/disable the RA Guard feature on the port
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.29601.2.122.2.4.1.2
fsIpv6SnpRagPortPolicyId
Indicates RA Guard policy ID applied to the interface.
A value of 0 indicates that no policy is applied on the interface.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.29601.2.122.2.4.1.3
fsIpv6SnpRagPortMode
Indicates the mode in which RA Guard functions on this interface.
It can be stateful or stateless.
Enumerationr/w
Enumerated Values:
1stateless
2stateful
 .1.3.6.1.4.1.29601.2.122.2.4.1.4
fsIpv6SnpRagPortCurrentState
Indicates current state of the RA Guard on port while operating in stateful mode.
In stateless mode of operation, this object is not applicble and indicates a value 'na'.
Enumeration
Enumerated Values:
0na
1learn
2forward
3block
 .1.3.6.1.4.1.29601.2.122.2.4.1.5
fsIpv6SnpRagPortTriggerStateChange
This objects allows manual triggering for movement of port state to learning/forwarding or blocking.
This object is applicable when RA guard feature works in stateful mode on the interface.
Enumerationr/w
Enumerated Values:
0none
1learn
2forward
3block
 .1.3.6.1.4.1.29601.2.122.2.4.1.6
fsIpv6SnpRagPortLearnTime
When the port state change is triggered to 'learn', the port remains in the learning state for the 'Learn Time'
duration. After this time, the port state moves to 'forwarding' state if legitimate RA messages are
receiv…
secondsInteger32r/w
Constraints:
range: 180-900
 .1.3.6.1.4.1.29601.2.122.2.4.1.7
fsIpv6SnpRagPortTrustState
Indicates RA guard port trust state as trusted/untrusted.
trusted : RA messages will be forwarded without any validation
untrusted : RA messages will be forwarded based on the RA guard policy validation on the interfa…
Enumerationr/w
Enumerated Values:
1trusted
2untrusted
 .1.3.6.1.4.1.29601.2.122.2.4.1.8
fsIpv6SnpRagPortVlanlist
This object indicates the list of VLAN on which the RA guard feature is applicable.
When VLAN list is NULL, the RA guard configurations are applicable at port level and for all VLANs on the port.
When VLAN list is confi…
VlanListr/w
Textual Convention: VlanList OctetString
 .1.3.6.1.4.1.29601.2.122.2.4.1.9
fsIpv6SnpRagPortRowStatus
This object is used to create or delete entry in the table
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.29601.2.122.2.4.1.10

fsIPv6SnpRagSrcIPv6ListTable

table
.1.3.6.1.4.1.29601.2.122.2.5 · 1 row entry · 5 columns
Open in standard view 
This table contains Src Ipv6 Prefix List information that can 
be set as match criteria in the RA Guard policy entry.
This can be used for validating the Src IPv6 carried by 
incoming RA messages.
fsIpv6SnpRagSrcIPv6ListEntry entry .1.3.6.1.4.1.29601.2.122.2.5.1
Each entry contains the Src Ipv6 Prefixes used to validate the prefix information
carried in RA messages.
Indexes
fsIpv6SnpRagSrcIPv6ListNo fsIpv6SnpRagSrcIPv6EntryNo
Column Syntax OID
fsIpv6SnpRagSrcIPv6ListNo
Indicates the Src IPv6 Prefix-list number of this entry
The Src IPv6 Prefix List number can be mapped to RA Guard policy entry to
configure the matching criteria for the policy entry.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.29601.2.122.2.5.1.1
fsIpv6SnpRagSrcIPv6EntryNo
Indicates entry number for each Src IPv6 prefix.
For a single Src IPv6 prefix-list number, many entries can be created. Thus several
Src IPv6 prefixes can be associated to a prefix-list number.
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.29601.2.122.2.5.1.2
fsIpv6SnpRagSrcIPv6Addr
Src Ipv6 prefix value of this entry
Ipv6AddressPrefixr/w
Textual Convention: Ipv6AddressPrefix OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.29601.2.122.2.5.1.3
fsIpv6SnpRagSrcIPv6PrefixLength
Indicates prefix length for each Src Ipv6 prefix
Integer32r/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.29601.2.122.2.5.1.4
fsIpv6SnpRagSrcIPv6RowStatus
This object is used to create or delete entry in the Src IPv6 Prefix List table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.29601.2.122.2.5.1.5