ARICENT-DHCP-RLY-MI-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
29

fsMIDhcpContextTable

table
.1.3.6.1.4.1.29601.2.92.2.1 · 1 row entry · 20 columns
Open in standard view 
This context table contains the global parameters of DHCP Relay 
that is required to be configured for each context.
fsMIDhcpContextEntry entry .1.3.6.1.4.1.29601.2.92.2.1.1
An Entry for the configuration in a particular VR.
Indexes
fsMIDhcpContextId
Column Syntax OID
fsMIDhcpContextId
The index value that uniquely identifies the virtual router in which the configuration is done.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.29601.2.92.2.1.1.1
fsMIDhcpRelaying
Only when enabled, the Relay Agent shall become active.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.29601.2.92.2.1.1.2
fsMIDhcpRelayServersOnly
When enabled, the Relay Agent shall forward the
packets from the client to a specific DHCP server.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.29601.2.92.2.1.1.3
fsMIDhcpRelaySecsThreshold
IF the secs field in the DHCP message is greater than the
fsMIDhcpRelaySecsThreshold, Packet get dropped at the Relay Agent
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.29601.2.92.2.1.1.4
fsMIDhcpRelayHopsThreshold
A maximum hop count,a relay agent allow to pass through it.If
the HopCount in the Dhcp Message is greater than the fsMIDhcpRelayHopsThreshold,
Packet get dropped at the Relay Agent
Integer32r/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.29601.2.92.2.1.1.5
fsMIDhcpRelayRAIOptionControl
Only when enabled, the Relay Agent shall do any processing
related to Relay Agent Information Options - like
inserting the necessary options while relaying a packet
from a client to a server and examining/stripping of
o…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.29601.2.92.2.1.1.6
fsMIDhcpRelayRAICircuitIDSubOptionControl
When enabled, if the RAIOption is globally enabled,
then the Relay Agent shall insert the CircuitID sub-option,
when necessary, while relaying packets from a client
to server and also examines/strips off this sub-opti…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.29601.2.92.2.1.1.7
fsMIDhcpRelayRAIRemoteIDSubOptionControl
When enabled, if the RAIOption is globally enabled,
then the Relay Agent shall insert the RemoteID sub-option,
when necessary, while relaying packets from a client
to server and also examines/strips off this sub-optio…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.29601.2.92.2.1.1.8
fsMIDhcpRelayRAISubnetMaskSubOptionControl
When enabled, if the RAIOption is globally enabled,
then the Relay Agent shall insert the Subnet Mask sub-option,
when necessary, while relaying packets from a client
to server and also examines/strips off this sub-op…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.29601.2.92.2.1.1.9
fsMIDhcpRelayRAIOptionInserted
Number of packets in which the RelayAgent inserted
the RAIOption.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.92.2.1.1.10
fsMIDhcpRelayRAICircuitIDSubOptionInserted
Number of packets in which the RelayAgent inserted
the CircuitID SubOption.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.92.2.1.1.11
fsMIDhcpRelayRAIRemoteIDSubOptionInserted
Number of packets in which the RelayAgent inserted
the RemoteID SubOption.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.92.2.1.1.12
fsMIDhcpRelayRAISubnetMaskSubOptionInserted
Number of packets in which the RelayAgent inserted
the SubnetMask SubOption.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.92.2.1.1.13
fsMIDhcpRelayRAIOptionWronglySet
Number of packets dropped by the Relay Agent because the giaddr
field is not set but the RAI option exists in the packet.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.92.2.1.1.14
fsMIDhcpRelayRAISpaceConstraint
Number of packets in which the RAI Option wasnot inserted
by the Relay Agent because if inserted the packetsize shall
exceed the MTU.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.92.2.1.1.15
fsMIDhcpConfigTraceLevel
The Trace level Object which has bit masks for
various levels of tracing
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.29601.2.92.2.1.1.16
fsMIDhcpConfigDhcpCircuitOption
This Object defines the type of information to be present in circuit id
sub-option.And this option can specfied only if
CircuitIDSubOptionControl is enabled.It is possible to set more than
one bit at a time.Currentl…
Bitsr/w
Enumerated Values:
0routerindex
1vlanid
2recvport
 .1.3.6.1.4.1.29601.2.92.2.1.1.17
fsMIDhcpRelayCounterReset
This object is used to reset the statistics counters.
When set to set(1), statistics counters will be cleared. When set
to notset(2), no action will take place.
Enumerationr/w
Enumerated Values:
1set
2notset
 .1.3.6.1.4.1.29601.2.92.2.1.1.18
fsMIDhcpRelayContextRowStatus
Row status of this table
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.29601.2.92.2.1.1.19
fsMIDhcpRelayRAIVPNIDSubOptionControl
This object When enabled & if the RAIOption is globally enabled along with VRF,
then the Relay Agent shall insert the VRF name in the VPN identifier sub-option,
Link Selection sub-option and server identifier override …
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.29601.2.92.2.1.1.20

fsMIDhcpRelaySrvAddressTable

table
.1.3.6.1.4.1.29601.2.92.2.2 · 1 row entry · 2 columns
Open in standard view 
This table contains the IP addresses of the DHCP Server 
to which the Relay Agent needs to forward the packets from 
the client. This object becomes active only when 
dhcpRelayServersOnly is enabled.
fsMIDhcpRelaySrvAddressEntry entry .1.3.6.1.4.1.29601.2.92.2.2.1
Indexes
fsMIDhcpContextId fsMIDhcpRelaySrvIpAddress
Column Syntax OID
fsMIDhcpRelaySrvIpAddress
The IP Address of the DHCP server.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.29601.2.92.2.2.1.1
fsMIDhcpRelaySrvAddressRowStatus
RowStatus of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.29601.2.92.2.2.1.2

fsMIDhcpRelayIfTable

table
.1.3.6.1.4.1.29601.2.92.2.3 · 1 row entry · 3 columns
Open in standard view 
This table holds the circuit id SubOption configured over the
interface.This option will be inserted for dhcp request packets 
received on this interface based on the status of 
fsMIDhcpRelayRAICircuitIDSubOptionControl.Using this table,the dhcp 
broadcast response is sent on the appropriate interface over which 
the broadcast dhcp request was received.
fsMIDhcpRelayIfEntry entry .1.3.6.1.4.1.29601.2.92.2.3.1
Contains configured dhcp relay information suboptions
Indexes
fsMIDhcpContextId IF-MIBifIndex
Column Syntax OID
fsMIDhcpRelayIfCircuitId
Circuit Id value configured over this interface.Configuring
with zero value will reset the circuit id configuration for this
interface.Circuit id will be inserted to dhcp request packet received
on this interface if…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.92.2.3.1.1
fsMIDhcpRelayIfRemoteId
Remote Id value configured over this interface.String of length zero
will reset the configuration.Value other than XYZ (which is the
considered as default value internally) can be configured for this
object.Configuring…
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.29601.2.92.2.3.1.2
fsMIDhcpRelayIfRowStatus
Row status of this table
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.29601.2.92.2.3.1.3

fsMIDhcpRelayIfServerTable

table
.1.3.6.1.4.1.29601.2.92.2.4 · 1 row entry · 2 columns
Open in standard view 
This table contains interface-specific DHCP Servers
to which which the Relay Agent needs to forward the packets from
the client. If interface-specific DHCP Servers are configured,
they will be used instead of globally configured ones for the packets,
relayed over the interface.
fsMIDhcpRelayIfServerEntry entry .1.3.6.1.4.1.29601.2.92.2.4.1
DHCP Server entry.
Indexes
fsMIDhcpContextId IF-MIBifIndex fsMIDhcpRelayIfServerIpAddress
Column Syntax OID
fsMIDhcpRelayIfServerIpAddress
The IP Address of the DHCP server.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.29601.2.92.2.4.1.1
fsMIDhcpRelayIfServerRowStatus
RowStatus of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.29601.2.92.2.4.1.2

fsMIDhcpRelayIfExtensionTable

table
.1.3.6.1.4.1.29601.2.92.2.5 · 1 row entry · 2 columns
Open in standard view 
This table holds optional interface-specific Relay Agent configurables,
excluding DHCP suboptions.
fsMIDhcpRelayIfExtensionEntry entry .1.3.6.1.4.1.29601.2.92.2.5.1
Contains the status of DHCP Relay Agent on this interface.
Indexes
fsMIDhcpContextId IF-MIBifIndex
Column Syntax OID
fsMIDhcpRelayIfExtensionRelayEnabled
The Relaying Agent status on this interface.
If disabled, DHCP broadcast packets, arriving on this interface,
will not be relayed.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.29601.2.92.2.5.1.1
fsMIDhcpRelayIfExtensionRowStatus
RowStatus of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.29601.2.92.2.5.1.2