AP80-PRIVATE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

138

lineTable

table

.1.3.6.1.4.1.14823.2.3.2.2.1 · 1 row entry · 5 columns

Open in standard view

Table of descriptive and status information about
configuration of each RS-232 line in this system

lineEntry entry .1.3.6.1.4.1.14823.2.3.2.2.1.1

An entry in the table, containing information
about configuration in one RS232 line of the Access Point.

Indexes

lineIndex

Column Syntax OID

lineIndex

This is defined as RS-232 index.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.14823.2.3.2.2.1.1.1

lineDataBits

This is defined as number of data bits for the RS232 interface.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.14823.2.3.2.2.1.1.2

lineParity

This is defined as parity of the RS232 interface.

Enumeration

Enumerated Values:

1	odd
2	even
99	none

.1.3.6.1.4.1.14823.2.3.2.2.1.1.3

lineSpeed

This is defined as the speed of the RS-232 interface.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.14823.2.3.2.2.1.1.4

lineStopBits

This is defined as the number of stop bits for the RS-232 interface.

SNMPv2-SMIInteger32

Constraints:
range: 0-9

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.14823.2.3.2.2.1.1.5

portTable

table

.1.3.6.1.4.1.14823.2.3.2.3.1 · 1 row entry · 9 columns

Open in standard view

Table of descriptive and status information about
configuration of each switch port (including expansion slot)
in this system. This table also contains information
about each trunk (similar to Cisco's EtherChannel).

portEntry entry .1.3.6.1.4.1.14823.2.3.2.3.1.1

An entry in the table, containing information
about configuration in one switch port of the switch.

Indexes

portIndex

Column Syntax OID

portIndex

This is defined as ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.14823.2.3.2.3.1.1.1

portName

Indicates the port name. This is same as
ifAlias in the IF-MIB (RFC2863 or later).

OctetString

Constraints:
range: 0-64

.1.3.6.1.4.1.14823.2.3.2.3.1.1.2

portType

Indicates the port type.

Enumeration

Enumerated Values:

1	other
2	hundredBaseTX
3	hundredBaseFX
4	thousandBaseSX
5	thousandBaseLX
6	thousandBaseT
7	thousandBaseGBIC
8	thousandBaseMiniGBIC

.1.3.6.1.4.1.14823.2.3.2.3.1.1.3

portSpeedDpxCfg

Indicates the port speed and duplex mode as follows:
halfDuplex10(2) - 10Mbps and half duplex mode
fullDuplex10(3) - 10Mbps and full duplex mode
halfDuplex100(4) - 100Mbps and half duplex mode
fullDuplex100(5) …

Enumeration

Enumerated Values:

1	reserved
2	halfDuplex10
3	fullDuplex10
4	halfDuplex100
5	fullDuplex100
6	halfDuplex1000
7	fullDuplex1000

.1.3.6.1.4.1.14823.2.3.2.3.1.1.4

portFlowCtrlCfg

(1) Flow control mechanism is enabled.
If the port type is hundredBaseTX or thousandBaseSX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism. When
the port is operating in…

Enumeration

Enumerated Values:

1	enabled
2	disabled
3	backPressure
4	dot3xFlowControl

Constraints:
range: 0-9

.1.3.6.1.4.1.14823.2.3.2.3.1.1.5

portCapabilities

Port capabilities.

Enumeration

Enumerated Values:

1	portCap10full
2	portCap100half
3	portCap100full
4	portCap1000half
5	portCap1000full
6	reserved6
7	reserved7
8	reserved8
9	reserved9
10	reserved10
11	reserved11
12	reserved12
13	reserved13
14	portCapSym
15	portCapFlowCtrl
99	portCap10half

.1.3.6.1.4.1.14823.2.3.2.3.1.1.6

portAutonegotiation

Whether autonegotiation is enabled.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.14823.2.3.2.3.1.1.7

portSpeedDpxStatus

The operating speed and duplex mode of the
switched port. If this index is a trunk,
the speed is the speed of its individual members.
If this index is a trunk and the result
is inconsistent among its member ports, this …

Enumeration

Enumerated Values:

1	error
2	halfDuplex10
3	fullDuplex10
4	halfDuplex100
5	fullDuplex100
6	halfDuplex1000
7	fullDuplex1000

.1.3.6.1.4.1.14823.2.3.2.3.1.1.8

portFlowCtrlStatus

(2) BackPressure flow control machanism is used.
(3) IEEE 802.3 flow control machanism is used.
(4) Flow control mechanism is disabled.
If this index is a trunk and the result
is inconsistent among its member ports, thi…

Enumeration

Enumerated Values:

1	error
2	backPressure
3	dot3xFlowControl
4	none

.1.3.6.1.4.1.14823.2.3.2.3.1.1.9

dot11AuthenticationServerTable

table

.1.3.6.1.4.1.14823.2.3.2.7.2 · 1 row entry · 10 columns

Open in standard view

Table of descriptive and status information about
configuration of each authentication server.

dot11AuthenticationServerEntry entry .1.3.6.1.4.1.14823.2.3.2.7.2.1

An entry in the table, containing information
about configuration of one authentication server of the AP.

Indexes

dot11AuthenticationServerIndex

Column Syntax OID

dot11AuthenticationServerIndex

Index of the Authentication Server

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.14823.2.3.2.7.2.1.1

dot11AuthenticationServer

This value indicates the IP address of the authentication server.

RFC1155-SMIIpAddressr/w

Textual Convention: RFC1155-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.14823.2.3.2.7.2.1.2

dot11AuthenticationPort

This value indicates the UDP Port used by the authentication server.

Integer32r/w

Constraints:
range: 1024-65535

.1.3.6.1.4.1.14823.2.3.2.7.2.1.3

dot11AuthenticationKey

This value indicates the shared key used by the authentication server.

OctetStringr/w

Constraints:
range: 0-20

.1.3.6.1.4.1.14823.2.3.2.7.2.1.4

dot11AuthenticationRetransmit

This value indicates the retransmit timer length used by the
authentication server.

Integer32r/w

Constraints:
range: 1-30

.1.3.6.1.4.1.14823.2.3.2.7.2.1.5

dot11AuthenticationTimeout

This value indicates the Timeout value(sec) used by the
authentication server.

Integer32r/w

Constraints:
range: 0-9
range: 1-60

.1.3.6.1.4.1.14823.2.3.2.7.2.1.6

dot11AuthenticationAcctPort

The port number for radius server accounting.

Integer32r/w

Constraints:
range: 1-20
range: 1024-65535

.1.3.6.1.4.1.14823.2.3.2.7.2.1.7

dot11AuthenticationAcctInterimUpdate

This value indicates the Timeout value(sec) used by the
radius server interim update.

Integer32r/w

Constraints:
range: 60-86400

.1.3.6.1.4.1.14823.2.3.2.7.2.1.8

dot11AuthenticationMACAddressFormat

This value indicates the MAC address format from Radius
MAC authentication.
no-delimiter format: aabbccddeeff
single-dash format: aabbcc-ddeeff
multi-dash format: aa-bb-cc-dd-ee-ff
multi-colon format: aa:bb:cc:…

Enumerationr/w

Enumerated Values:

1	no-delimiter
2	single-dash
3	multi-dash
4	multi-colon

.1.3.6.1.4.1.14823.2.3.2.7.2.1.9

dot11AuthenticationVLANIDFormat

This value indicates the VLAN ID format from Radius server.

Enumerationr/w

Enumerated Values:

1	hex
2	ascii

.1.3.6.1.4.1.14823.2.3.2.7.2.1.10

dot11FilterTable

table

.1.3.6.1.4.1.14823.2.3.2.7.3.2 · 1 row entry · 2 columns

Open in standard view

Table of status information about
each configured MAC Address Filtering Entry.

dot11FilterEntry entry .1.3.6.1.4.1.14823.2.3.2.7.3.2.1

An entry in the table, containing information
about configuration in one radio of the AP.

Indexes

dot11FilterAddress

Column Syntax OID

dot11FilterAddress

This value indicates the MAC address of the
filter entry.

MacAddress

Textual Convention: MacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.14823.2.3.2.7.3.2.1.1

dot11FilterStatus

This value indicates the Status of the filter entry.
Ifallowed, the client is allowed access to the network.
If disallowed, the no frames will be forwarded to the
network from the client.

Enumerationr/w

Enumerated Values:

30	allowed
31	denied
32	delete

.1.3.6.1.4.1.14823.2.3.2.7.3.2.1.2

dot11AuthenticationSupplicantTable

table

.1.3.6.1.4.1.14823.2.3.2.7.5 · 1 row entry · 4 columns

Open in standard view

Table of descriptive and status information about
configuration of supplicant

dot11AuthenticationSupplicantEntry entry .1.3.6.1.4.1.14823.2.3.2.7.5.1

An entry in the table, containing information
about configuration of one supplicant.

Indexes

dot11AuthenticationSuppIndex

Column Syntax OID

dot118021xSuppIndex

Index of the interface for which this supplicant is
running. Currently only the ethernet interface.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.14823.2.3.2.7.5.1.1

dot118021xSuppState

This object is used to enable or disable the 802.1x supplicant.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.14823.2.3.2.7.5.1.2

dot118021xSuppUser

This value indicates the username for supplicant. If value is
configured, will display ****. Else will display EMPTY.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.14823.2.3.2.7.5.1.3

dot118021xSuppPasswd

This value indicates the password for supplicant. If value is
configured, will display ****. Else will display EMPTY.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.14823.2.3.2.7.5.1.4

dot11VapAuthenticationTable

table

.1.3.6.1.4.1.14823.2.3.2.7.6 · 1 row entry · 7 columns

Open in standard view

Table of descriptive and status information about
configuration of 8021x for each Vap.

dot11VapAuthenticationEntry entry .1.3.6.1.4.1.14823.2.3.2.7.6.1

An entry in the table, containing information
about configuration of 8021x for each Vap of the AP.

Indexes

dot11Vap8021xIndex

Column Syntax OID

dot11Vap8021xIndex

Index for configuration.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.14823.2.3.2.7.6.1.1

dot11Vap8021xState

This attribute indicates that the Enterprise the state
of the 802.1x authentication algorithm.

Enumerationr/w

Enumerated Values:

0	disabled
1	supported
2	required

.1.3.6.1.4.1.14823.2.3.2.7.6.1.2

dot11Vap8021xBroadcastKeyRefreshRate

The number (in minutes) between changing the broadcast key for
802.1x and WPA clients

Integer32r/w

Constraints:
range: 0-1440

.1.3.6.1.4.1.14823.2.3.2.7.6.1.3

dot11Vap8021xSessionKeyRefreshRate

The number (in minutes) between changing session keys for
802.1x and WPA clients

Integer32r/w

Constraints:
range: 0-1440

.1.3.6.1.4.1.14823.2.3.2.7.6.1.4

dot11Vap8021xReauthenticationTimeout

The number (in minutes) between forcing 802.1x clients to
reauthenticate

Integer32r/w

Constraints:
range: 0-1440

.1.3.6.1.4.1.14823.2.3.2.7.6.1.5

dot11VapAuthMACAuthenticationType

This value indicates the type of mac authentication in use.

Enumerationr/w

Enumerated Values:

0	disabled
1	local
2	remote

.1.3.6.1.4.1.14823.2.3.2.7.6.1.6

dot11VapAuthMACAuthenticationTimeout

The number (in minutes) between forcing Radius MAC to authenticate.

Integer32r/w

Constraints:
range: 0-1440

.1.3.6.1.4.1.14823.2.3.2.7.6.1.7

enterpriseApNativeVlanTable

table

.1.3.6.1.4.1.14823.2.3.2.9.3 · 1 row entry · 3 columns

Open in standard view

Table used to manage the Vlans for each
wireless interface.

enterpriseApNativeVlanEntry entry .1.3.6.1.4.1.14823.2.3.2.9.3.1

An entry in the table, containing information
about vlan configuration of one wireless interface.

Indexes

nativeVlanIfIndex nativeVlanSsidNumber

Column	Syntax	OID
nativeVlanIfIndex Interface Index of the wireless interface for which the vlan is assigned to.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.14823.2.3.2.9.3.1.1`
nativeVlanSsidNumber Associated Number for Service Set Id (SSID) of the wireless interface for which the vlan is assigned to. Note: This is for future support of multiple SSIDs per radio interface.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.14823.2.3.2.9.3.1.2`
nativeVlanVlanId This value indicates the native VLAN id of the wireless interface associated with the if index and the SSID number(if it is not 0).	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.14823.2.3.2.9.3.1.3`

enterpriseApFilterProtocolTable

table

.1.3.6.1.4.1.14823.2.3.2.10.4 · 1 row entry · 4 columns

Open in standard view

Table of descriptive and status information about
configuration of the filter protocol table.

enterpriseApFilterProtocolEntry entry .1.3.6.1.4.1.14823.2.3.2.10.4.1

An entry in the filter protocol table, containing information
about configuration of one filter table entry.

Indexes

enterpriseApFilterProtocolIndex

Column Syntax OID

enterpriseApFilterProtocolIndex

Index of the Protocol Filters.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.14823.2.3.2.10.4.1.1

enterpriseApFilterProtocolName

This value indicates the name of the protocol filter. One of
the following:
Aironet_DDP, Appletalk_ARP, ARP, Banyan, Berkeley_Trailer_Negotiation,
CDP, DEC_LAT, DEC_MOP, DEC_MOP_Dump_Load, DEC_XNS, EAPOL,
Enet_Confi…

DisplayString

Textual Convention: DisplayString OctetString

.1.3.6.1.4.1.14823.2.3.2.10.4.1.2

enterpriseApFilterProtocolISODesignator

This value indicates the name of the protocol filter.

DisplayString

Textual Convention: DisplayString OctetString

.1.3.6.1.4.1.14823.2.3.2.10.4.1.3

enterpriseApFilterProtocolState

This value indicates whether the protocol filter is enabled.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.14823.2.3.2.10.4.1.4

uplinkPortMACAddrFilteringTable

table

.1.3.6.1.4.1.14823.2.3.2.10.5.3 · 1 row entry · 2 columns

Open in standard view

Table of descriptive and status information about
configuration of the Uplink Port MAC Address Filter Table.

uplinkPortMACAddrFilteringEntry entry .1.3.6.1.4.1.14823.2.3.2.10.5.3.1

An entry in Uplink Port MAC Address Filter Table.

Indexes

uplinkPortMacAddrIndex

Column	Syntax	OID
uplinkPortMacAddrIndex The index for Uplink Port MAC Address Filter Table.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.14823.2.3.2.10.5.3.1.1`
uplinkPortMACAddr The MAC Address of wireless clients which allowed to communicate on subnet.	MacAddress Textual Convention: MacAddress `OctetString` Type Constraints: `range: 6`	`.1.3.6.1.4.1.14823.2.3.2.10.5.3.1.2`

enterpriseApSyslogServerTable

table

.1.3.6.1.4.1.14823.2.3.2.13.4 · 1 row entry · 4 columns

Open in standard view

Table of descriptive and status information about
configuration of each syslog server.

enterpriseApSyslogServerEntry entry .1.3.6.1.4.1.14823.2.3.2.13.4.1

An entry in the table, containing information
about configuration of one syslog server of the AP.

Indexes

enterpriseApSyslogServerIndex

Column Syntax OID

enterpriseApSyslogServerIndex

Index of the Syslog Server

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.14823.2.3.2.13.4.1.1

enterpriseApSyslogServerState

This value indicates whether the syslog server is enabled.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.14823.2.3.2.13.4.1.2

enterpriseApSyslogServerIPAddress

This value indicates the IP address of the syslog server.

RFC1155-SMIIpAddressr/w

Textual Convention: RFC1155-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.14823.2.3.2.13.4.1.3

enterpriseApSyslogServerPort

This value indicates the UDP Port used by the syslog server.

Integer32r/w

Constraints:
range: 1024-65535

.1.3.6.1.4.1.14823.2.3.2.13.4.1.4

enterpriseApSecurityTable

table

.1.3.6.1.4.1.14823.2.3.2.14.1 · 1 row entry · 12 columns

Open in standard view

Table of descriptive and status information about
configuration of each radio in terms of security settings.

enterpriseApSecurityEntry entry .1.3.6.1.4.1.14823.2.3.2.14.1.1

An entry in the table, containing information
about configuration of one radio of the AP.

Indexes

enterpriseApSecurityIndex

Column Syntax OID

enterpriseApSecurityIndex

Radio Index for security settings.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.14823.2.3.2.14.1.1.1

enterpriseApSecuritySharedKeyLen

This value indicates the shared key length for this radio interface.

Enumeration

Enumerated Values:

0	none
1	sixtyFour
2	oneHundredTwentyEight
3	oneHundredFiftyTwo

.1.3.6.1.4.1.14823.2.3.2.14.1.1.3

enterpriseApSecurityWPAMode

This value indicates the state of WPA for this radio interface.

Enumerationr/w

Enumerated Values:

0	supported
1	required
2	disabled

.1.3.6.1.4.1.14823.2.3.2.14.1.1.4

enterpriseApSecurityWPAKeyType

This value indicates the type of WPA Key Management in use for this radio interface.

Enumerationr/w

Enumerated Values:

0	dot1x
1	presharedkey

.1.3.6.1.4.1.14823.2.3.2.14.1.1.5

enterpriseApSecurityWPACipher obsolete

This value indicates the type of WPA Cipher in use for this radio interface.

Enumerationr/w

Enumerated Values:

0	wep
1	tkip
2	aes

.1.3.6.1.4.1.14823.2.3.2.14.1.1.6

enterpriseApSecurityWPAPSKType

This value indicates the type of WPA Pre Shared Key in use for this radio interface.

Enumerationr/w

Enumerated Values:

0	hex
1	alphanumeric

.1.3.6.1.4.1.14823.2.3.2.14.1.1.7

enterpriseApSecurityWPAPSK

This value indicates WPA Pre Shared Key in use for this radio interface.

OctetStringr/w

Constraints:
range: 0-80

.1.3.6.1.4.1.14823.2.3.2.14.1.1.8

enterpriseApSecurityWEPKeyType

This value indicates the type of WEP Key in use for this radio interface.

Enumerationr/w

Enumerated Values:

0	hexadecimal
1	alphanumeric

.1.3.6.1.4.1.14823.2.3.2.14.1.1.9

enterpriseApSecurityWEPEnabled

This value indicates whether WEP is enabled.

TruthValuer/w

Textual Convention: TruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.14823.2.3.2.14.1.1.10

enterpriseApSecurityWPACipherSuite

This value indicates the type of WPA Cipher Suite in use for this radio interface.

Enumerationr/w

Enumerated Values:

0	aes-ccmp
1	tkip
2	wep

.1.3.6.1.4.1.14823.2.3.2.14.1.1.11

enterpriseApSecurityWPAPreAuthentication

Whether Pre-Authentication is enabled.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.14823.2.3.2.14.1.1.12

enterpriseApSecurityWPAPmksaLifetime

The number (in minutes) for Pmksa-Lifetime.

Integer32r/w

Constraints:
range: 0-14400

.1.3.6.1.4.1.14823.2.3.2.14.1.1.13

enterpriseApRadioTable

table

.1.3.6.1.4.1.14823.2.3.2.15.1 · 1 row entry · 25 columns

Open in standard view

Table of descriptive and status information about
configuration of each radio.

enterpriseApRadioEntry entry .1.3.6.1.4.1.14823.2.3.2.15.1.1

An entry in the table, containing information
about configuration of one radio of the AP.

Indexes

enterpriseApRadioIndex

Column Syntax OID

enterpriseApRadioIndex

Radio Index for configuration.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.14823.2.3.2.15.1.1.1

enterpriseApRadioState obsolete

This value indicates the state of the radio interface.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.14823.2.3.2.15.1.1.2

enterpriseApRadioAutoChannel

This value indicates whether auto channel selection is enabled or not
for this radio interface

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.14823.2.3.2.15.1.1.3

enterpriseApRadioTransmitPower

This value indicates the transmit power for this radio interface.

Enumerationr/w

Enumerated Values:

0	min
1	eighth
2	quarter
3	half
4	full

.1.3.6.1.4.1.14823.2.3.2.15.1.1.4

enterpriseApRadioClosedSystem obsolete

This value indicates whether closed system is enabled for this radio interface.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.14823.2.3.2.15.1.1.5

enterpriseApRadioMaxAssoc obsolete

This value indicates the max number of clients allowed on this radio interface.

Integer32r/w

Constraints:
range: 1-64

.1.3.6.1.4.1.14823.2.3.2.15.1.1.6

enterpriseApRadioTransmitKey obsolete

This value indicates default transmit key in use for this radio interface.

Integer32r/w

Constraints:
range: 1-4

.1.3.6.1.4.1.14823.2.3.2.15.1.1.7

enterpriseApRadioTurboMode

This value indicates whether turbo mode is enabled for this radio interface.

Enumerationr/w

Enumerated Values:

1	disabled
2	static-turbo
3	dynamic-turbo

.1.3.6.1.4.1.14823.2.3.2.15.1.1.8

enterpriseApRadioDescription obsolete

This value indicates the description for this radio interface.

OctetStringr/w

Constraints:
range: 0-80

.1.3.6.1.4.1.14823.2.3.2.15.1.1.9

enterpriseApRadioDataRate

This value indicates the data rate for this radio interface.
Radio interface A operates at 6, 9, 12, 18, 24, 36, 48, 54.
Radio interface G operates all listed data rates. The auto
setting will attempt to set the best …

Enumerationr/w

Enumerated Values:

1	oneMbps
2	twoMbps
5	fiveAndHalfMbps
6	sixMbps
9	nineMbps
11	elevenMbps
12	twelveMbps
18	eighteenMbps
24	twentyFourMbps
36	thirtySixMbps
48	fourtyEightMbps
54	fiftyFourMbps
255	auto

.1.3.6.1.4.1.14823.2.3.2.15.1.1.10

enterpriseApRadioGMode

This value indicates the radio mode for the 802.11g radio.
This setting is only valid for the 802.11g interface.

Enumerationr/w

Enumerated Values:

1	bOnly
2	gOnly
3	bg

.1.3.6.1.4.1.14823.2.3.2.15.1.1.11

enterpriseApRadioAntennaMode

This value indicates the antenna mode in use for the G-radio.
The values are interpreted as follows:
fixed(1) means use both built-in antennas,
external(2) means use one external antenna on the right side.
This setti…

Enumerationr/w

Enumerated Values:

1	fixed
2	external

.1.3.6.1.4.1.14823.2.3.2.15.1.1.12

enterpriseApRadioAntennaId

DisplayString

Textual Convention: DisplayString OctetString

.1.3.6.1.4.1.14823.2.3.2.15.1.1.13

enterpriseApRadioRogueApDetection

The status of Rogue AP detection for each index.
enabled(1) To set rogue Ap detection enabled.
disabled(2) To set rogue Ap detection disabled.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.14823.2.3.2.15.1.1.16

enterpriseApRadioRogueApScanInterval

This value indicates the interval between each rogue AP scan.(unit: minutes)

Integer32r/w

Constraints:
range: 30-10080

.1.3.6.1.4.1.14823.2.3.2.15.1.1.17

enterpriseApRadioRogueApScanDuration

This value indicates the rogue AP scan duratoin.(unit: minutes)

Integer32r/w

Constraints:
range: 100-1000

.1.3.6.1.4.1.14823.2.3.2.15.1.1.18

enterpriseApRadioRogueApScanNow

To force Ap to do rogue AP scan right away.
enabled(1) To do Rogue AP scan right now.
disabled(2) To set rogue Ap.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.14823.2.3.2.15.1.1.19

enterpriseApRadioMICMode

This value indicates the MIC mode status for this radio index.
software(1) To set MIC mode to software.
hardware(2) To set MIC mode to hardware.

Enumerationr/w

Enumerated Values:

1	software
2	hardware

.1.3.6.1.4.1.14823.2.3.2.15.1.1.21

enterpriseApRadioSuperMode

This value indicates the super mode status for this radio index.
enabled (1) To set super mode enabled.
disabled(2) To set super mode disabled.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.14823.2.3.2.15.1.1.22

enterpriseApRadioBeaconInterval

This value indicates the beacon interval for this radio index.

Integer32r/w

Constraints:
range: 20-1000

.1.3.6.1.4.1.14823.2.3.2.15.1.1.23

enterpriseApRadioDataBeaconRate

This value indicates the data beacon rate for the radio index.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.14823.2.3.2.15.1.1.24

enterpriseApRadioChannel

This valud indicates the radio channel for the radio index.
set channel 42/50/58/152/160 for static turbo mode,
set channel 40/48/56/153/161 for dynamic turbo mode,
set channel 36/40/44/48/52/56/60/64/149/153/157/161/16…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.14823.2.3.2.15.1.1.25

enterpriseApRadioFragmentLength

This value indicates the fragment length for the radio index.(unit: Byte)

Integer32r/w

Constraints:
range: 256-2346

.1.3.6.1.4.1.14823.2.3.2.15.1.1.26

enterpriseApRadioRTSThreshold

This value indicates the RTS Threshold for the radio index.(unit: Byte)

Integer32r/w

Constraints:
range: 0-2347

.1.3.6.1.4.1.14823.2.3.2.15.1.1.27

enterpriseApRadioAntennaGainReduction

This value indicates the antenna gain reduction for the radio index.(unit: dB)

Integer32r/w

Constraints:
range: 0-29

.1.3.6.1.4.1.14823.2.3.2.15.1.1.28

enterpriseApSNMPTrapDestinationTable

table

.1.3.6.1.4.1.14823.2.3.2.16.3 · 1 row entry · 4 columns

Open in standard view

Table of descriptive and status information about
configuration of each trap receiving server.

enterpriseApSNMPTrapDestinationEntry entry .1.3.6.1.4.1.14823.2.3.2.16.3.1

An entry in the table, containing information
about configuration of one trap receiving server.

Indexes

enterpriseApSNMPTrapDestinationIndex

Column Syntax OID

enterpriseApSNMPTrapDestinationIndex

Index of the Trap Destination Table.

Integer32

Constraints:
range: 1-4

.1.3.6.1.4.1.14823.2.3.2.16.3.1.1

enterpriseApSNMPTrapDestinationCommunity

The SNMP Trap Community

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.14823.2.3.2.16.3.1.2

enterpriseApSNMPTrapDestinationIP

The IP address of the trap receiving server.

RFC1155-SMIIpAddressr/w

Textual Convention: RFC1155-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.14823.2.3.2.16.3.1.3

enterpriseApSNMPTrapDestinationState

This value indicates whether the trap receiving server is enabled.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.14823.2.3.2.16.3.1.4

enterpriseApSessionTable

table

.1.3.6.1.4.1.14823.2.3.2.17.1 · 1 row entry · 15 columns

Open in standard view

This table list all sessions (wireless stations) status

enterpriseApSessionEntry entry .1.3.6.1.4.1.14823.2.3.2.17.1.1

An entry in the table, containing information
about status and statistics of the wireless station.

Indexes

enterpriseApSessionIfIndex enterpriseApSessionStationAddres

Column Syntax OID

enterpriseApSessionIfIndex

Interface index for the radio this session is associated
with.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.14823.2.3.2.17.1.1.1

enterpriseApSessionStationAddres

The unique MAC Address of the station for this session.

MacAddress

Textual Convention: MacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.14823.2.3.2.17.1.1.2

enterpriseApSessionAuthenticated

Whether the session is authenticated or not.

TruthValue

Textual Convention: TruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.14823.2.3.2.17.1.1.3

enterpriseApSessionAssociated

Whether the session is associated or not. It is rare case that
not associated stations show up in the table.

TruthValue

Textual Convention: TruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.14823.2.3.2.17.1.1.4

enterpriseApSessionIsForwarding

Whether the AP is forwarding the client station traffic (higher level authentication)

TruthValue

Textual Convention: TruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.14823.2.3.2.17.1.1.5

enterpriseApSessionKeyType

The encryption key type used by the station. Note that wpa-wep is not supported

Enumeration

Enumerated Values:

1	none
2	staticWep
3	dynamicWep
4	wpaWep
5	wpaTkip
6	wpaAes

.1.3.6.1.4.1.14823.2.3.2.17.1.1.6

enterpriseApSessionAssociationId

The internal association identify number

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.14823.2.3.2.17.1.1.7

enterpriseApSessionLastAuthenticatedTime

This is the time in hundredths of a second last time the client
is authenticated. Note that a session may be authenticated multiple times.
The value is related to the system startup

RFC1155-SMITimeTicks

Textual Convention: RFC1155-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.14823.2.3.2.17.1.1.8

enterpriseApSessionAssociatedTime

This is the time in hundredths of a second since the client
associated. The value is related to the system startup

RFC1155-SMITimeTicks

Textual Convention: RFC1155-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.14823.2.3.2.17.1.1.9

enterpriseApSessionLastAssociatedTime

This is the time in hundredths of a second when the client
associated in last session. The value is related to the system startup

RFC1155-SMITimeTicks

Textual Convention: RFC1155-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.14823.2.3.2.17.1.1.10

enterpriseApSessionLastDisassociatedTime

This is the time in hundredths of a second when the client
disassociated in last session. The value is related to the system startup

RFC1155-SMITimeTicks

Textual Convention: RFC1155-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.14823.2.3.2.17.1.1.11

enterpriseApSessionTxPacketCount

This is the number of packets transmitted from the client to the AP. It includes
data, control and management packets.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.14823.2.3.2.17.1.1.12

enterpriseApSessionRxPacketCount

This is the number of unicast packets transmitted from the AP to the client.
It includes data, control and management packets.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.14823.2.3.2.17.1.1.13

enterpriseApSessionTxByteCount

This is the number of bytes transmitted from the client to the AP. It
includes the bytes of data, control and management packets.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.14823.2.3.2.17.1.1.14

enterpriseApSessionRxByteCount

This is the number of unicast bytes transmitted from the AP to
the client. It includes the bytes of data, control and management
packets.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.14823.2.3.2.17.1.1.15

enterpriseAPVapRadioTable

table

.1.3.6.1.4.1.14823.2.3.2.20.1 · 1 row entry · 9 columns

Open in standard view

Table of descriptive and status information about
configuration of each radio.

enterpriseAPVapRadioEntry entry .1.3.6.1.4.1.14823.2.3.2.20.1.1

An entry in the table, containing information
about configuration of one radio of the AP.

Indexes

enterpriseAPVapRadioIndex

Column Syntax OID

enterpriseAPVapRadioIndex

Radio Index for configuration.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.14823.2.3.2.20.1.1.1

enterpriseAPVapRadioState

This value indicates the state of the radio interface.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.14823.2.3.2.20.1.1.2

enterpriseAPVapRadioClosedSystem

This value indicates whether closed system is enabled for this radio interface.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.14823.2.3.2.20.1.1.3

enterpriseAPVapRadioMaxAssoc

This value indicates the max number of clients allowed on this radio interface.

Integer32r/w

Constraints:
range: 1-64

.1.3.6.1.4.1.14823.2.3.2.20.1.1.4

enterpriseAPVapRadioTransmitKey

This value indicates default transmit key in use for this radio interface.

Integer32r/w

Constraints:
range: 1-4

.1.3.6.1.4.1.14823.2.3.2.20.1.1.5

enterpriseAPVapRadioDescription

This value indicates the description for this radio interface.

OctetStringr/w

Constraints:
range: 0-80

.1.3.6.1.4.1.14823.2.3.2.20.1.1.6

enterpriseAPVapRadioAuthTimeoutInterval

This value indicates the Authentication Timeout interval for this radio interface.

Integer32r/w

Constraints:
range: 5-60

.1.3.6.1.4.1.14823.2.3.2.20.1.1.8

enterpriseAPVapRadioAssocTimeoutInterval

This value indicates the Association Timeout interval for this radio interface.

Integer32r/w

Constraints:
range: 0-9
range: 5-60

.1.3.6.1.4.1.14823.2.3.2.20.1.1.9

enterpriseAPVapRadioWPA2PMKSALifeTime

This value indicates the WPA2 PMSA Life Time for this radio interface.

Integer32r/w

Constraints:
range: 1-20
range: 1-1440

.1.3.6.1.4.1.14823.2.3.2.20.1.1.10

enterpriseApRadioWdsTable

table

.1.3.6.1.4.1.14823.2.3.2.22.1 · 1 row entry · 3 columns

Open in standard view

Table of configuration information for Wds for each
Radio interface.

enterpriseApRadioWdsEntry entry .1.3.6.1.4.1.14823.2.3.2.22.1.1

An entry in the table, containing information
about configuration of peer Bridging
for one radio of the AP. The table is indexed by radio
Index (corresponding to enterpriseApRadioTable). The table does not contain …

Indexes

enterpriseApRadioIndex

Column Syntax OID

wdsApRole

This value indicates the role of the Ap for this radio,
roleAp(1): AP operation.
roleBridgeMaster(2): Root-Bridge mode.
roleBridge(4): Bridge Mode.
relay wireless traffic.

Enumerationr/w

Enumerated Values:

1	roleAp
2	roleBridgeMaster
4	roleBridge

.1.3.6.1.4.1.14823.2.3.2.22.1.1.1

wdsChannelAutoSync

This value indicates the states of channel auto synchronize for this radio.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.14823.2.3.2.22.1.1.3

wdsMasterSlaveMode

This value indicates the Master/Slave mode for this radio.
master (1) To set to master mode.
slave (2) To set to slave mode.

Enumerationr/w

Enumerated Values:

1	master
2	slave

.1.3.6.1.4.1.14823.2.3.2.22.1.1.4

enterpriseApRadioWdsPeerTable

table

.1.3.6.1.4.1.14823.2.3.2.22.2 · 1 row entry · 2 columns

Open in standard view

Table of configuration information for Wds Peers for each
Radio interface.

enterpriseApRadioWdsPeerEntry entry .1.3.6.1.4.1.14823.2.3.2.22.2.1

Indexes

enterpriseApRadioIndex wdsPeerIndex

Column	Syntax	OID
wdsPeerIndex Peer Index for the radio interface.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.14823.2.3.2.22.2.1.1`
wdsPeerBssid The BSSID for this peer.	OctetStringr/w Constraints: `range: 1-6`	`.1.3.6.1.4.1.14823.2.3.2.22.2.1.2`

enterpriseApWMMTable

table

.1.3.6.1.4.1.14823.2.3.2.24.1 · 1 row entry · 2 columns

Open in standard view

The table of WMM information for each radio interface.

enterpriseApWMMEntry entry .1.3.6.1.4.1.14823.2.3.2.24.1.1

An entry of table, contains the WMM information.

Indexes

enterpriseApWMMModeIndex

Column Syntax OID

enterpriseApWMMModeIndex

Peer Index for the radio interface.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.14823.2.3.2.24.1.1.1

enterpriseApWMMMode

This value indicates the WMM mode for the radio interface.
disabled(1) To set WMM mode disabled.
support (2) To set WMM mode supported.
required(3) To set WMM mode required.

Enumerationr/w

Enumerated Values:

1	disabled
2	support
3	required

.1.3.6.1.4.1.14823.2.3.2.24.1.1.2

enterpriseApWMMAckPolicyTable

table

.1.3.6.1.4.1.14823.2.3.2.24.2 · 1 row entry · 1 columns

Open in standard view

The table of WMM Ack Policy information for each ac number on the radio interface.

enterpriseApWMMAckPolicyEntry entry .1.3.6.1.4.1.14823.2.3.2.24.2.1

An entry of table, contains the WMM Ack Policy information.

Indexes

enterpriseApWMMAckPolicyIndex

Column	Syntax	OID
enterpriseApWMMAckPolicyIndex The value indicates the AC number for each radio interface. 0 --> AC0 (Best Effect) 1 --> AC1 (Background) 2 --> AC2 (Video) 3 --> AC3 (Voice)	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.14823.2.3.2.24.2.1.1`

enterpriseApWMMBSSParamTable

table

.1.3.6.1.4.1.14823.2.3.2.24.3 · 1 row entry · 6 columns

Open in standard view

The table of WMM BSS parameter information.

enterpriseApWMMBSSParamEntry entry .1.3.6.1.4.1.14823.2.3.2.24.3.1

An entry of table, contains the WMM BSS parameter information for each ac number on the radio interface.

Indexes

enterpriseApWMMBSSParamIndex

Column Syntax OID

enterpriseApWMMBSSParamIndex

The value indicates the AC number for each radio interface.
0 --> AC0 (Best Effort)
1 --> AC1 (Background)
2 --> AC2 (Video)
3 --> AC3 (Voice)

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.14823.2.3.2.24.3.1.1

enterpriseApWMMBSSParamLogCwMin

This value indicates the WMM BSS parameter logCwMin of AC number for the radio interface.

Integer32r/w

Constraints:
range: 1-15

.1.3.6.1.4.1.14823.2.3.2.24.3.1.2

enterpriseApWMMBSSParamLogCwMax

This value indicates the WMM BSS parameter logCwMax of each AC number for the radio interface.

Integer32r/w

Constraints:
range: 1-15

.1.3.6.1.4.1.14823.2.3.2.24.3.1.3

enterpriseApWMMBSSParamAIFSN

This value indicates the WMM BSS parameters AIFSN of each AC number for the radio interface.

Integer32r/w

Constraints:
range: 1-15

.1.3.6.1.4.1.14823.2.3.2.24.3.1.4

enterpriseApWMMBSSParamTXOPLimit

This value indicates the WMM BSS parameters TXOP Limit of each AC number for the radio interface.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.14823.2.3.2.24.3.1.5

enterpriseApWMMBSSParamAdmissionCtrl

This value indicates the BSS parameters Admission Control of each AC number for the radio interface.

Enumerationr/w

Enumerated Values:

1	ebabled
2	disabled

.1.3.6.1.4.1.14823.2.3.2.24.3.1.6

enterpriseApWMMAPParamTable

table

.1.3.6.1.4.1.14823.2.3.2.24.4 · 1 row entry · 6 columns

Open in standard view

The table of configuration information for WMM AP parameters for each ac number on the radio interface.

enterpriseApWMMAPParamEntry entry .1.3.6.1.4.1.14823.2.3.2.24.4.1

An entry table, include the Ap parameter information for each ac numbers.

Indexes

enterpriseApWMMAPParamIndex

Column Syntax OID

enterpriseApWMMAPParamIndex

The value indicates the AC number for each radio interface.
0 --> AC0 (Best Effort)
1 --> AC1 (Background)
2 --> AC2 (Video)
3 --> AC3 (Voice)

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.14823.2.3.2.24.4.1.1

enterpriseApWMMAPParamLogCwMin

This value indicates the LogCwMin of AP parameter for each AC number on the radio interface.

Integer32r/w

Constraints:
range: 1-15

.1.3.6.1.4.1.14823.2.3.2.24.4.1.2

enterpriseApWMMAPParamLogCwMax

This value indicates the LogCwMax of AP parameter for each AC number on the radio interface.

Integer32r/w

Constraints:
range: 1-15

.1.3.6.1.4.1.14823.2.3.2.24.4.1.3

enterpriseApWMMAPParamAIFSN

This value indicates the AIFSN of AP parameter for each AC number on the radio interface.

Integer32r/w

Constraints:
range: 1-15

.1.3.6.1.4.1.14823.2.3.2.24.4.1.4

enterpriseApWMMAPParamTXOPLimit

This value indicates the TXOP Limit of AP parameter for each AC number on the radio interface.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.14823.2.3.2.24.4.1.5

enterpriseApWMMAPParamAdmissionCtrl

This value indicates the admission control of AP parameter for each AC number on the radio interface.

Enumerationr/w

Enumerated Values:

1	ebabled
2	disabled

.1.3.6.1.4.1.14823.2.3.2.24.4.1.6

enterpriseApSTPNodeTable

table

.1.3.6.1.4.1.14823.2.3.2.25.6.1 · 1 row entry · 3 columns

Open in standard view

The table of STP link Path Cost and link port priority information for each nodes on radio interface.

enterpriseApSTPNodeEntry entry .1.3.6.1.4.1.14823.2.3.2.25.6.1.1

An entry in a table, contain the link path cost and link port priroity information.

Indexes

enterpriseApSTPNodeIndex

Column	Syntax	OID
enterpriseApSTPNodeIndex Peer Index for the nodes on the radio interface.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.14823.2.3.2.25.6.1.1.1`
enterpriseApSTPNodeLinkPathCost This value indicates the link path cost for the node on this radio interface.	Integer32r/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.14823.2.3.2.25.6.1.1.2`
enterpriseApSTPNodeLinkPortPriority This value indicates the link path cost for the node on this radio interface.	Integer32r/w Constraints: `range: 0-255`	`.1.3.6.1.4.1.14823.2.3.2.25.6.1.1.3`