ALTEON-TS-PHYSICAL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
17
Rows
17
Columns
128

agPortCurCfgTable

table mandatory
.1.3.6.1.4.1.1872.2.1.2.3.2 · 1 row entry · 18 columns
Open in standard view 
The table of port configuration in the current_configuration block.
agPortCurCfgTableEntry entry .1.3.6.1.4.1.1872.2.1.2.3.2.1
A row in the port table in the current_configuration block.
Indexes
agPortCurCfgIndx
Column Syntax OID
agPortCurCfgIndx mandatory
The index of the row in port configurations table.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.1872.2.1.2.3.2.1.1
agPortCurCfgPrefLink mandatory
This is the preferred link.
Enumeration
Enumerated Values:
2fast-ethernet
3gigabit-ethernet
 .1.3.6.1.4.1.1872.2.1.2.3.2.1.2
agPortCurCfgBackLink mandatory
This is the backup link.
Enumeration
Enumerated Values:
2fast-ethernet
3gigabit-ethernet
4none
 .1.3.6.1.4.1.1872.2.1.2.3.2.1.3
agPortCurCfgState mandatory
This is the state of the port.
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.1.2.3.2.1.4
agPortCurCfgVlanTag mandatory
This is VLAN tag state of the port
Enumeration
Enumerated Values:
2tagged
3untagged
 .1.3.6.1.4.1.1872.2.1.2.3.2.1.5
agPortCurCfgStp mandatory
This object is used to turn Spanning Tree on or off for the port.
Enumeration
Enumerated Values:
2on
3off
 .1.3.6.1.4.1.1872.2.1.2.3.2.1.6
agPortCurCfgRmon mandatory
This object is used to turn RMON on or off on the port.
Enumeration
Enumerated Values:
2on
3off
 .1.3.6.1.4.1.1872.2.1.2.3.2.1.7
agPortCurCfgPVID mandatory
The default VLAN ID for the port.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.1872.2.1.2.3.2.1.8
agPortCurCfgFastEthAutoNeg mandatory
This object is used to turn the autonegotiation on or off
for fast Ethernet connection.
Enumeration
Enumerated Values:
2on
3off
 .1.3.6.1.4.1.1872.2.1.2.3.2.1.9
agPortCurCfgFastEthSpeed mandatory
Selects the port speed for fast Ethernet connection.
Enumeration
Enumerated Values:
2mbs10
3mbs100
4mbs10or100
 .1.3.6.1.4.1.1872.2.1.2.3.2.1.10
agPortCurCfgFastEthMode mandatory
This object is used to select port mode for fast Ethernet connection.
Enumeration
Enumerated Values:
2full-duplex
3half-duplex
4full-or-half-duplex
 .1.3.6.1.4.1.1872.2.1.2.3.2.1.11
agPortCurCfgFastEthFctl mandatory
Selects the port flow control for fast Ethernet connection.
Enumeration
Enumerated Values:
2transmit
3receive
4both
5none
 .1.3.6.1.4.1.1872.2.1.2.3.2.1.12
agPortCurCfgGigEthAutoNeg mandatory
This object is used to turn the autonegotiation on or off
for gigabit Ethernet connection.
Enumeration
Enumerated Values:
2on
3off
 .1.3.6.1.4.1.1872.2.1.2.3.2.1.13
agPortCurCfgGigEthFctl mandatory
This object is used to select port flow control for
gigabit Ethernet connection.
Enumeration
Enumerated Values:
2transmit
3receive
4both
5none
 .1.3.6.1.4.1.1872.2.1.2.3.2.1.14
agPortCurCfgPortName mandatory
The switch port name.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.1872.2.1.2.3.2.1.15
agPortCurCfgBwmContract mandatory
The switch port Bandwidth Management contract number.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.2.3.2.1.16
agPortCurCfgDiscardNonIPs mandatory
Enable or disable to discard all non-IP traffic on the switch port.
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.1.2.3.2.1.17
agPortCurCfgLinkTrap mandatory
Indicates whether linkUp/linkDown traps should be
generated for this interface.

By default, this object should have the value
enabled(1) for interfaces which do not operate on
'top' of any other interface…
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.1872.2.1.2.3.2.1.18

agPortNewCfgTable

table mandatory
.1.3.6.1.4.1.1872.2.1.2.3.3 · 1 row entry · 18 columns
Open in standard view 
The table of port configuration in the new_configuration block.
agPortNewCfgTableEntry entry .1.3.6.1.4.1.1872.2.1.2.3.3.1
A row in the port configuration table in the new_configuration block.
Indexes
agPortNewCfgIndx
Column Syntax OID
agPortNewCfgIndx mandatory
The index of the row in port configurations table.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.1872.2.1.2.3.3.1.1
agPortNewCfgPrefLink mandatory
This is the preferred link.
Enumerationr/w
Enumerated Values:
2fast-ethernet
3gigabit-ethernet
 .1.3.6.1.4.1.1872.2.1.2.3.3.1.2
agPortNewCfgBackLink mandatory
This is the backup link.
Enumerationr/w
Enumerated Values:
2fast-ethernet
3gigabit-ethernet
4none
 .1.3.6.1.4.1.1872.2.1.2.3.3.1.3
agPortNewCfgState mandatory
This is the state of the port.
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.1.2.3.3.1.4
agPortNewCfgVlanTag mandatory
This is VLAN tag state of the port
Enumerationr/w
Enumerated Values:
2tagged
3untagged
 .1.3.6.1.4.1.1872.2.1.2.3.3.1.5
agPortNewCfgStp mandatory
This object is used to turn Spanning Tree on or off for the port.
Enumerationr/w
Enumerated Values:
2on
3off
 .1.3.6.1.4.1.1872.2.1.2.3.3.1.6
agPortNewCfgRmon mandatory
This object is used to turn RMON on or off on the port.
Enumerationr/w
Enumerated Values:
2on
3off
 .1.3.6.1.4.1.1872.2.1.2.3.3.1.7
agPortNewCfgPVID mandatory
The default VLAN ID for the port.
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.1872.2.1.2.3.3.1.8
agPortNewCfgFastEthAutoNeg mandatory
This object is used to turn the autonegotiation on or off
for fast Ethernet connection.
Enumerationr/w
Enumerated Values:
2on
3off
 .1.3.6.1.4.1.1872.2.1.2.3.3.1.9
agPortNewCfgFastEthSpeed mandatory
Selects the port speed for fast Ethernet connection.
Enumerationr/w
Enumerated Values:
2mbs10
3mbs100
4mbs10or100
 .1.3.6.1.4.1.1872.2.1.2.3.3.1.10
agPortNewCfgFastEthMode mandatory
This object is used to select port mode for fast Ethernet connection.
Enumerationr/w
Enumerated Values:
2full-duplex
3half-duplex
4full-or-half-duplex
 .1.3.6.1.4.1.1872.2.1.2.3.3.1.11
agPortNewCfgFastEthFctl mandatory
Selects the port flow control for fast Ethernet connection.
Enumerationr/w
Enumerated Values:
2transmit
3receive
4both
5none
 .1.3.6.1.4.1.1872.2.1.2.3.3.1.12
agPortNewCfgGigEthAutoNeg mandatory
This object is used to turn the autonegotiation on or off
for gigabit Ethernet connection.
Enumerationr/w
Enumerated Values:
2on
3off
 .1.3.6.1.4.1.1872.2.1.2.3.3.1.13
agPortNewCfgGigEthFctl mandatory
This object is used to select port flow control for
gigabit Ethernet connection.
Enumerationr/w
Enumerated Values:
2transmit
3receive
4both
5none
 .1.3.6.1.4.1.1872.2.1.2.3.3.1.14
agPortNewCfgPortName mandatory
The switch port name.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.1872.2.1.2.3.3.1.15
agPortNewCfgBwmContract mandatory
The switch port Bandwidth Management contract number.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.2.3.3.1.16
agPortNewCfgDiscardNonIPs mandatory
Enable or disable to discard all non-IP traffic on the switch port.
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.1.2.3.3.1.17
agPortNewCfgLinkTrap mandatory
Indicates whether linkUp/linkDown traps should be
generated for this interface.

By default, this object should have the value
enabled(1) for interfaces which do not operate on
'top' of any other interface…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.1872.2.1.2.3.3.1.18

vlanCurCfgTable

table mandatory
.1.3.6.1.4.1.1872.2.1.4.2 · 1 row entry · 7 columns
Open in standard view 
The table of VLAN configuration.
vlanCurCfgTableEntry entry .1.3.6.1.4.1.1872.2.1.4.2.1
A row in the VLAN configuration table.
Indexes
vlanCurCfgVlanId
Column Syntax OID
vlanCurCfgVlanId mandatory
The VLAN identifier.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.1872.2.1.4.2.1.1
vlanCurCfgVlanName mandatory
The VLAN name.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.1872.2.1.4.2.1.2
vlanCurCfgPorts mandatory
The port list in the VLAN. The ports are presented in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
…
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.1872.2.1.4.2.1.3
vlanCurCfgState mandatory
Enable or disable a VLAN
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.1.4.2.1.4
vlanCurCfgJumbo mandatory
Enable or Disable the Jumbo frame support for the VLAN
Enumeration
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.1.4.2.1.5
vlanCurCfgBwmContract mandatory
Default contract number the VLAN
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.4.2.1.6
vlanCurCfgStg mandatory
The Spanning Tree Group for the VLAN.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.4.2.1.7

vlanNewCfgTable

table mandatory
.1.3.6.1.4.1.1872.2.1.4.3 · 1 row entry · 10 columns
Open in standard view 
The table of VLAN configuration.
vlanNewCfgTableEntry entry .1.3.6.1.4.1.1872.2.1.4.3.1
A row in the VLAN configuration table.
Indexes
vlanNewCfgVlanId
Column Syntax OID
vlanNewCfgVlanId mandatory
The VLAN identifier.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.1872.2.1.4.3.1.1
vlanNewCfgVlanName mandatory
The VLAN name.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.1872.2.1.4.3.1.2
vlanNewCfgPorts mandatory
The port list in the VLAN. The ports are presented in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ po…
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.1872.2.1.4.3.1.3
vlanNewCfgState mandatory
Enable or disable a VLAN
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.1.4.3.1.4
vlanNewCfgJumbo mandatory
Enable or Disable the Jumbo frame support for the VLAN
Enumerationr/w
Enumerated Values:
2enabled
3disabled
 .1.3.6.1.4.1.1872.2.1.4.3.1.5
vlanNewCfgAddPort mandatory
The port to be added to the specified VLAN. A '0' value is
returned when read.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.4.3.1.6
vlanNewCfgRemovePort mandatory
The port to be removed from the specified VLAN. A '0'
value is returned when read.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.4.3.1.7
vlanNewCfgDelete mandatory
This is an action object to create or delete a VLAN.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete a VLAN
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.1872.2.1.4.3.1.8
vlanNewCfgBwmContract mandatory
Default contract number for the VLAN.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.4.3.1.9
vlanNewCfgStg mandatory
The Spanning Tree Group for the VLAN.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.4.3.1.10

trunkGroupCurCfgTable

table mandatory
.1.3.6.1.4.1.1872.2.1.7.2 · 1 row entry · 4 columns
Open in standard view 
The table of trunk group configuration.
trunkGroupCurCfgTableEntry entry .1.3.6.1.4.1.1872.2.1.7.2.1
A row in the trunk group configuration table.
Indexes
trunkGroupCurCfgIndex
Column Syntax OID
trunkGroupCurCfgIndex mandatory
The identifier of the trunk group.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.7.2.1.1
trunkGroupCurCfgPorts mandatory
The port list in the trunk group. The ports are presented in
bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||…
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.1872.2.1.7.2.1.2
trunkGroupCurCfgState mandatory
Enable or disable a trunk group.
Enumeration
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.1872.2.1.7.2.1.3
trunkGroupCurCfgBwmContract mandatory
Default BW contract of a trunk group.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.7.2.1.4

trunkGroupNewCfgTable

table mandatory
.1.3.6.1.4.1.1872.2.1.7.3 · 1 row entry · 7 columns
Open in standard view 
The table of trunk group configuration.
trunkGroupNewCfgTableEntry entry .1.3.6.1.4.1.1872.2.1.7.3.1
A row in the trunk group configuration table.
Indexes
trunkGroupNewCfgIndex
Column Syntax OID
trunkGroupNewCfgIndex mandatory
The identifier of the trunk group.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.7.3.1.1
trunkGroupNewCfgPorts mandatory
The port list in the trunk group. The ports are presented
in bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||…
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.1872.2.1.7.3.1.2
trunkGroupNewCfgAddPort mandatory
The port to be added in the trunk group. When read, 0 is returned.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.7.3.1.3
trunkGroupNewCfgRemovePort mandatory
The port to be deleted from the trunk group. when read, 0
is returned.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.7.3.1.4
trunkGroupNewCfgState mandatory
Enable or disable a trunk group.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.1872.2.1.7.3.1.5
trunkGroupNewCfgDelete mandatory
Setting the value to delete(2) will delete the entire
row. When read, other(1) is returned.
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.1872.2.1.7.3.1.6
trunkGroupNewCfgBwmContract mandatory
Default BW contract of a trunk group.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.7.3.1.7

portCpuStatsUtilTable

table mandatory
.1.3.6.1.4.1.1872.2.1.8.17.1 · 1 row entry · 7 columns
Open in standard view 
The table of port CPU utilization.
portCpuStatsUtilTableEntry entry .1.3.6.1.4.1.1872.2.1.8.17.1.1
A row in the port CPU utilization table.
Indexes
portCpuStatsUtilIndx
Column Syntax OID
portCpuStatsUtilIndx mandatory
The port index.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.1872.2.1.8.17.1.1.1
portCpuAStatsUtil1Second mandatory
The utilization of port CPU A over 1 second. It shows the percentage.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.8.17.1.1.2
portCpuBStatsUtil1Second mandatory
The utilization of port CPU B over 1 second. It shows the percentage.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.8.17.1.1.3
portCpuAStatsUtil4Seconds mandatory
The utilization of port CPU A over 4 seconds.
It shows the percentage.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.8.17.1.1.4
portCpuBStatsUtil4Seconds mandatory
The utilization of port CPU B over 4 seconds.
It shows the percentage.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.8.17.1.1.5
portCpuAStatsUtil64Seconds mandatory
The utilization of port CPU A over 64 seconds.
It shows the percentage.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.8.17.1.1.6
portCpuBStatsUtil64Seconds mandatory
The utilization of port CPU B over 64 seconds.
It shows the percentage.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.8.17.1.1.7

portStatsTable

table mandatory
.1.3.6.1.4.1.1872.2.1.8.26.1 · 1 row entry · 15 columns
Open in standard view 
The table of port statistics.
portStatsTableEntry entry .1.3.6.1.4.1.1872.2.1.8.26.1.1
A row in the port stats table.
Indexes
portStatsIndx
Column Syntax OID
portStatsIndx mandatory
The port index.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.1872.2.1.8.26.1.1.1
portStatsPhyIfInOctets mandatory
The total number of octets received on the
interface, including framing characters.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1872.2.1.8.26.1.1.2
portStatsPhyIfInUcastPkts mandatory
The number of subnetwork-unicast packets
delivered to a higher-layer protocol.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1872.2.1.8.26.1.1.3
portStatsPhyIfInNUcastPkts mandatory
The number of non-unicast (i.e., subnetwork-
broadcast or subnetwork-multicast) packets
delivered to a higher-layer protocol.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1872.2.1.8.26.1.1.4
portStatsPhyIfInDiscards mandatory
The number of inbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being deliverable to a
higher-layer protocol. One possible reason for
discarding such a packet co…
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1872.2.1.8.26.1.1.5
portStatsPhyIfInErrors mandatory
The number of inbound packets that contained
errors preventing them from being deliverable to a
higher-layer protocol.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1872.2.1.8.26.1.1.6
portStatsPhyIfInUnknownProtos mandatory
The number of packets received via the interface
which were discarded because of an unknown or
unsupported protocol.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1872.2.1.8.26.1.1.7
portStatsPhyIfOutOctets mandatory
The total number of octets transmitted out of the
interface, including framing characters.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1872.2.1.8.26.1.1.8
portStatsPhyIfOutUcastPkts mandatory
The total number of packets that higher-level
protocols requested be transmitted to a
subnetwork-unicast address, including those that
were discarded or not sent.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1872.2.1.8.26.1.1.9
portStatsPhyIfOutNUcastPkts mandatory
The total number of packets that higher-level
protocols requested be transmitted to a non-
unicast (i.e., a subnetwork-broadcast or
subnetwork-multicast) address, including those
that were discarded or not sent.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1872.2.1.8.26.1.1.10
portStatsPhyIfOutDiscards mandatory
The number of outbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being transmitted. One
possible reason for discarding such a packet could
be to free up buffer s…
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1872.2.1.8.26.1.1.11
portStatsPhyIfOutErrors mandatory
The number of outbound packets that could not be
transmitted because of errors.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1872.2.1.8.26.1.1.12
portStatsPhyIfOutQLen mandatory
The length of the output packet queue (in
packets).
RFC1155-SMIGauge
Textual Convention: RFC1155-SMIGauge Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1872.2.1.8.26.1.1.13
portStatsPhyIfInBroadcastPkts mandatory
The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
broadcast address at this sub-layer.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1872.2.1.8.26.1.1.14
portStatsPhyIfOutBroadcastPkts mandatory
The total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a broadcast address at this sub-layer,
including those that were discarded or not sent.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1872.2.1.8.26.1.1.15

portInfoTable

table mandatory
.1.3.6.1.4.1.1872.2.1.9.1.1 · 1 row entry · 11 columns
Open in standard view 
The table of port information.
portInfoTableEntry entry .1.3.6.1.4.1.1872.2.1.9.1.1.1
A row in the port information table.
Indexes
portInfoIndx
Column Syntax OID
portInfoIndx mandatory
The port index.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.1872.2.1.9.1.1.1.1
portInfoSpeed mandatory
The current operational speed of the port.
Enumeration
Enumerated Values:
2mbs10
3mbs100
4mbs1000
5any
 .1.3.6.1.4.1.1872.2.1.9.1.1.1.2
portInfoMode mandatory
The current operational mode of the port.
Enumeration
Enumerated Values:
2full-duplex
3half-duplex
 .1.3.6.1.4.1.1872.2.1.9.1.1.1.3
portInfoFlowCtrl mandatory
The current operational flow control of the port.
Enumeration
Enumerated Values:
2transmit
3receive
4both
5none
 .1.3.6.1.4.1.1872.2.1.9.1.1.1.4
portInfoLink mandatory
The current operational link status of the port.
Enumeration
Enumerated Values:
1up
2down
3disabled
4inoperative
 .1.3.6.1.4.1.1872.2.1.9.1.1.1.5
portInfoPhyIfDescr mandatory
A textual string containing information about the
interface. This string should include the name of
the manufacturer, the product name and the version
of the hardware interface.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.1872.2.1.9.1.1.1.6
portInfoPhyIfType mandatory
The type of interface, distinguished according to
the physical/link protocol(s) immediately `below'
the network layer in the protocol stack.
Enumeration
Enumerated Values:
1other
2regular1822
3hdh1822
4ddn-x25
5rfc877-x25
6ethernet-csmacd
7iso88023-csmacd
8iso88024-tokenBus
9iso88025-tokenRing
10iso88026-man
11starLan
12proteon-10Mbit
13proteon-80Mbit
14hyperchannel
15fddi
16lapb
17sdlc
18ds1
19e1
20basicISDN
21primaryISDN
22propPointToPointSerial
23ppp
24softwareLoopback
25eon
26ethernet-3Mbit
27nsip
28slip
29ultra
30ds3
31sip
32frame-relay
 .1.3.6.1.4.1.1872.2.1.9.1.1.1.7
portInfoPhyIfMtu mandatory
The size of the largest datagram which can be
sent/received on the interface, specified in
octets. For interfaces that are used for
transmitting network datagrams, this is the size
of the largest network datagram that …
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.9.1.1.1.8
portInfoPhyIfPhysAddress mandatory
The interface's address at the protocol layer
immediately `below' the network layer in the
protocol stack. For interfaces which do not have
such an address (e.g., a serial line), this object
should contain an octet str…
RFC1213-MIBPhysAddress
Textual Convention: RFC1213-MIBPhysAddress OctetString
 .1.3.6.1.4.1.1872.2.1.9.1.1.1.9
portInfoPhyIfOperStatus mandatory
The current operational state of the interface.
The testing(3) state indicates that no operational
packets can be passed.
Enumeration
Enumerated Values:
1up
2down
3testing
 .1.3.6.1.4.1.1872.2.1.9.1.1.1.10
portInfoPhyIfLastChange mandatory
The value of sysUpTime at the time the interface
entered its current operational state. If the
current state was entered prior to the last re-
initialization of the local network management
subsystem, then this object …
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1872.2.1.9.1.1.1.11

pmCurCfgPortMonitorTable

table mandatory
.1.3.6.1.4.1.1872.2.1.18.1.3 · 1 row entry · 3 columns
Open in standard view 
The table of monitoring ports.
pmCurCfgPortMonitorEntry entry .1.3.6.1.4.1.1872.2.1.18.1.3.1
A row in the monitoring port table.
Indexes
pmCurCfgPmirrMoniPortIndex pmCurCfgPmirrMirrPortIndex
Column Syntax OID
pmCurCfgPmirrMoniPortIndex mandatory
The monitoring port number.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.18.1.3.1.1
pmCurCfgPmirrMirrPortIndex mandatory
The mirrored port number
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.18.1.3.1.2
pmCurCfgPmirrDirection mandatory
The type of traffic to be monitored with respect to the
mirrored port.
Enumeration
Enumerated Values:
1in
2out
3both
 .1.3.6.1.4.1.1872.2.1.18.1.3.1.3

pmNewCfgPortMonitorTable

table mandatory
.1.3.6.1.4.1.1872.2.1.18.1.4 · 1 row entry · 4 columns
Open in standard view 
The table of monitoring ports.
pmNewCfgPortMonitorEntry entry .1.3.6.1.4.1.1872.2.1.18.1.4.1
A row in the monitoring port table.
Indexes
pmNewCfgPmirrMoniPortIndex pmNewCfgPmirrMirrPortIndex
Column Syntax OID
pmNewCfgPmirrMoniPortIndex mandatory
The monitoring port number.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.18.1.4.1.1
pmNewCfgPmirrMirrPortIndex mandatory
The mirrored port number
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.18.1.4.1.2
pmNewCfgPmirrDirection mandatory
The type of traffic to be monitored with respect to the
mirrored port.
Enumerationr/w
Enumerated Values:
1in
2out
3both
 .1.3.6.1.4.1.1872.2.1.18.1.4.1.3
pmNewCfgPmirrDelete mandatory
Setting the value to delete(2) will delete the entire
row. When read, other(1) is returned.
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.1872.2.1.18.1.4.1.4

pmCurCfgVlanMonitorTable

table mandatory
.1.3.6.1.4.1.1872.2.1.18.2.3 · 1 row entry · 3 columns
Open in standard view 
The table of vlan based port mirroring.
pmCurCfgVlanMonitorEntry entry .1.3.6.1.4.1.1872.2.1.18.2.3.1
A row in the monitoring vlan table.
Indexes
pmCurCfgVmirrMoniPortIndex pmCurCfgVmirrMirrVlanIndex
Column Syntax OID
pmCurCfgVmirrMoniPortIndex mandatory
The monitoring port number.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.18.2.3.1.1
pmCurCfgVmirrMirrVlanIndex mandatory
The mirrored vlan number
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.18.2.3.1.2
pmCurCfgVmirrDirection mandatory
The type of traffic to be monitored with respect to the
mirrored vlan.
Enumeration
Enumerated Values:
1in
2out
3both
 .1.3.6.1.4.1.1872.2.1.18.2.3.1.3

pmNewCfgVlanMonitorTable

table mandatory
.1.3.6.1.4.1.1872.2.1.18.2.4 · 1 row entry · 4 columns
Open in standard view 
The table of vlan-based port mirroring.
pmNewCfgVlanMonitorEntry entry .1.3.6.1.4.1.1872.2.1.18.2.4.1
A row in the monitoring vlan table.
Indexes
pmNewCfgVmirrMoniPortIndex pmNewCfgVmirrMirrVlanIndex
Column Syntax OID
pmNewCfgVmirrMoniPortIndex mandatory
The monitoring port number.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.18.2.4.1.1
pmNewCfgVmirrMirrVlanIndex mandatory
The mirrored vlan number
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.18.2.4.1.2
pmNewCfgVmirrDirection mandatory
The type of traffic to be monitored with respect to the
mirrored vlan.
Enumerationr/w
Enumerated Values:
1in
2out
3both
 .1.3.6.1.4.1.1872.2.1.18.2.4.1.3
pmNewCfgVmirrDelete mandatory
Setting the value to delete(2) will delete the entire
row. When read, other(1) is returned.
Enumerationr/w
Enumerated Values:
1other
2delete
 .1.3.6.1.4.1.1872.2.1.18.2.4.1.4

stgCurCfgTable

table mandatory
.1.3.6.1.4.1.1872.2.1.19.1 · 1 row entry · 4 columns
Open in standard view 
The table of Spanning Tree Groups configuration in the current_config.
stgCurCfgTableEntry entry .1.3.6.1.4.1.1872.2.1.19.1.1
Information about a particular Spanning Tree Group configuration.
Indexes
stgCurCfgIndex
Column Syntax OID
stgCurCfgIndex mandatory
The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.1872.2.1.19.1.1.1
stgCurCfgState mandatory
Turn on of off Spanning Tree operation of a particular Spanning
Tree Group.
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.1872.2.1.19.1.1.2
stgCurCfgVlanBmap1 mandatory
The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 2048.

in receiving order:

OCTET 1 OCTET 2 .....…
OctetString
Constraints:
range: 0-256
 .1.3.6.1.4.1.1872.2.1.19.1.1.3
stgCurCfgVlanBmap2 mandatory
The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 2049 to 4096.

in receiving order:

OCTET 1 OCTET 2 ..…
OctetString
Constraints:
range: 0-256
 .1.3.6.1.4.1.1872.2.1.19.1.1.4

stgNewCfgTable

table mandatory
.1.3.6.1.4.1.1872.2.1.19.2 · 1 row entry · 7 columns
Open in standard view 
The table of Spanning Tree Groups configuration in the new_config.
stgNewCfgTableEntry entry .1.3.6.1.4.1.1872.2.1.19.2.1
Information about a particular Spanning Tree Group configuration.
Indexes
stgNewCfgIndex
Column Syntax OID
stgNewCfgIndex mandatory
The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.1872.2.1.19.2.1.1
stgNewCfgState mandatory
Turn on of off Spanning Tree operation of a particular Spanning
Tree Group.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.1872.2.1.19.2.1.2
stgNewCfgDefaultCfg mandatory
Setting the value to default-config(1) will set the default
configuration as recommended by IEEE 802.1D for a particular
Spanning Tree Group. default-config (1) is always returned
When read, but it does not mean anyt…
Enumerationr/w
Enumerated Values:
1default-config
 .1.3.6.1.4.1.1872.2.1.19.2.1.3
stgNewCfgAddVlan mandatory
The vlan to be added to the specified Spanning Tree Group. A
'0' value is returned when read.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.19.2.1.4
stgNewCfgRemoveVlan mandatory
The vlan to be removed from the specified Spanning Tree Group.
A '0' value is returned when read.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.19.2.1.5
stgNewCfgVlanBmap1 mandatory
The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 2048.

in receiving order:

OCTET 1 OCTET 2 .....…
OctetString
Constraints:
range: 0-256
 .1.3.6.1.4.1.1872.2.1.19.2.1.6
stgNewCfgVlanBmap2 mandatory
The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 2049 to 4096.

in receiving order:

OCTET 1 OCTET 2 ..…
OctetString
Constraints:
range: 0-256
 .1.3.6.1.4.1.1872.2.1.19.2.1.7

stgCurCfgPortTable

table mandatory
.1.3.6.1.4.1.1872.2.1.19.3 · 1 row entry · 3 columns
Open in standard view 
The table of Spanning Tree Group port configuration in the
current_config.
stgCurCfgPortTableEntry entry .1.3.6.1.4.1.1872.2.1.19.3.1
Information about port configuration of a particular Spanning Tree
Group.
Indexes
stgCurCfgStgIndex stgCurCfgPortIndex
Column Syntax OID
stgCurCfgStgIndex mandatory
The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.19.3.1.1
stgCurCfgPortIndex mandatory
The port identifier of a particular Spanning Tree Group.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.19.3.1.2
stgCurCfgPortState mandatory
Turn on of off Spanning Tree operation of a particular port of a
Spanning Tree Group.
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.1872.2.1.19.3.1.3

stgNewCfgPortTable

table mandatory
.1.3.6.1.4.1.1872.2.1.19.4 · 1 row entry · 3 columns
Open in standard view 
The table of Spanning Tree Group port configuration in the
new_config.
stgNewCfgPortTableEntry entry .1.3.6.1.4.1.1872.2.1.19.4.1
Information about port configuration of a particular Spanning Tree
Group.
Indexes
stgNewCfgStgIndex stgNewCfgPortIndex
Column Syntax OID
stgNewCfgStgIndex mandatory
The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.19.4.1.1
stgNewCfgPortIndex mandatory
The port identifier of a particular Spanning Tree Group.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1872.2.1.19.4.1.2
stgNewCfgPortState mandatory
Turn on of off Spanning Tree operation of a particular port of a
Spanning Tree Group.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.1872.2.1.19.4.1.3