ALCATEL-ENT1-IPRMV6-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
22

alaIprmV6RouteTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.1 · 1 row entry · 7 columns
Open in standard view 
IPRM's IPv6 Routing table. This table contains
an entry for each valid IPv6 unicast route that
can be used for packet forwarding determination.
It is for display purposes only.
alaIprmV6RouteEntry entry .1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.1.1
A routing entry.
Indexes
alaIprmV6RouteDest alaIprmV6RoutePfxLength alaIprmV6RouteNextHop alaIprmV6RouteProtocol alaIprmV6RouteIfIndex
Column Syntax OID
alaIprmV6RouteDest
The destination IPv6 address of this route.
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.1.1.1
alaIprmV6RoutePfxLength
Indicates the prefix length of the destination
address.
bitsInteger32
Constraints:
range: 0-128
 .1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.1.1.2
alaIprmV6RouteNextHop
On remote routes, the address of the next
system en route; otherwise, ::0
('00000000000000000000000000000000'H in ASN.1
string representation).
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.1.1.3
alaIprmV6RouteProtocol
The protocol that this route was learned from
IANA-RTPROTO-MIBIANAipRouteProtocol
Textual Convention: IANA-RTPROTO-MIBIANAipRouteProtocol Enumeration
Type Values:
1other
2local
3netmgmt
4icmp
5egp
6ggp
7hello
8rip
9isIs
10esIs
11ciscoIgrp
12bbnSpfIgp
13ospf
14bgp
15idpr
16ciscoEigrp
17dvmrp
18rpl
19dhcp
20ttdp
 .1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.1.1.4
alaIprmV6RouteIfIndex
The index value which uniquely identifies the local
interface through which the next hop of this
route should be reached.
IPV6-TCIpv6IfIndex
Textual Convention: IPV6-TCIpv6IfIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.1.1.5
alaIprmV6RouteMetric
The routing metric for this route. The
semantics of this metric are determined by the
routing protocol specified in the route's
ipv6RouteProtocol value.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.1.1.6
alaIprmV6RouteValid
If this value is true(1) IPRM believes the
route is being used. If this value is false(2),
the route is currently not being used and is
considered a backup route.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.1.1.7

alaIprmV6StaticRouteTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.2 · 1 row entry · 10 columns
Open in standard view 
Table allowing the creation and removal of IPv6 Static Routes.
alaIprmV6StaticRouteEntry entry .1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.2.1
An IPv6 static route entered by the user
Indexes
alaIprmV6StaticRouteDest alaIprmV6StaticRoutePfxLength alaIprmV6StaticRouteNextHop alaIprmV6StaticRouteIfIndex
Column Syntax OID
alaIprmV6StaticRouteDest
The destination IPv6 address of this static route.
This object may not take a multicast address value.
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.2.1.1
alaIprmV6StaticRoutePfxLength
Indicates the prefix length of the destination
address.
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.2.1.2
alaIprmV6StaticRouteNextHop
The IPv6 address of the next hop towards the
destination.
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.2.1.3
alaIprmV6StaticRouteIfIndex
The index value which uniquely identifies the local
interface through which the next hop of this
route should be reached.
IPV6-TCIpv6IfIndexOrZero
Textual Convention: IPV6-TCIpv6IfIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.2.1.4
alaIprmV6StaticRouteMetric
The routing metric for this route. The lower the
value, the higher the priority for the static
route.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.2.1.5
alaIprmV6StaticRouteStatus
Used to control the addition and removal of static
routes.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.2.1.6
alaIprmV6StaticRouteTag
Tag associated with route.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.2.1.7
alaIprmV6StaticRouteName
A comment associated with the static route.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.2.1.8
alaIprmV6StaticRouteBfdStatus
For enabling or disabling the BFD status on this static route.
ALCATEL-ENT1-IPRM-MIBAlaIprmAdminStatusr/w
Textual Convention: ALCATEL-ENT1-IPRM-MIBAlaIprmAdminStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.2.1.9
alaIprmV6StaticRouteType
Type of static route.
ALCATEL-ENT1-IPRM-MIBAlaIprmStaticRouteTypesr/w
Textual Convention: ALCATEL-ENT1-IPRM-MIBAlaIprmStaticRouteTypes Enumeration
Type Values:
1regular
2recursive
3bfdEnabled
4interface
 .1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.2.1.10

alaIprmV6RtPrefTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.3 · 1 row entry · 2 columns
Open in standard view 
This table specifies the route preference values for
various types of IPv6 routes handled by IPRM.
alaIprmV6RtPrefTableEntry entry .1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.3.1
An entry is in this table for each IPv6 route preference type.
Indexes
alaIprmV6RtPrefEntryType
Column Syntax OID
alaIprmV6RtPrefEntryType
The type of route (associated with a route preference value)
AlaIprmV6RtPrefType
Textual Convention: AlaIprmV6RtPrefType Enumeration
Type Values:
1local
2static
3ospf
4rip
5bgpExternal
6bgpInternal
7isisl1
8isisl2
9import
 .1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.3.1.1
alaIprmV6RtPrefEntryValue
The route preference value used for this type of route.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.3.1.2

alaIprmV6ImportVrfTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.6 · 1 row entry · 3 columns
Open in standard view 
This table specifies VRFs to import IPv6 routes from.
alaIprmV6ImportVrfEntry entry .1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.6.1
An entry in this table is created for each VRF
to import IPv6 routes from.
Indexes
alaIprmV6ImportVrfName
Column Syntax OID
alaIprmV6ImportVrfName
The name of the VRF that IPv6 routes should be imported from. An
empty string indicates the default VRF.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.6.1.1
alaIprmV6ImportVrfRouteMap
A route-map index representing the route-map used to filter
IPv6 imported routes. A value of 0 indicates all IPv6 routes
that have been exported by the specified VRF should be imported.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.6.1.2
alaIprmV6ImportVrfRowStatus
This variable is used to create, modify, and/or
delete a row in this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.6.1.3