ADTRAN-TAeSCU-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
16
Rows
16
Columns
89

adTAeSCUConfigTable

table
.1.3.6.1.4.1.664.2.241.1.1 · 1 row entry · 1 columns
Open in standard view 
The enhanced System Controller Unit Config table.
adTAeSCUConfigEntry entry .1.3.6.1.4.1.664.2.241.1.1.1
An entry in the eSCU Config table.
Indexes
ADTRAN-GENSLOT-MIBadGenSlotInfoIndex
Column Syntax OID
adTAeSCUBootVersion
Firmware version of the boot ROM.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.2.241.1.1.1.1

adTAeSCUCardProvTable

table
.1.3.6.1.4.1.664.2.241.2.1 · 1 row entry · 6 columns
Open in standard view 
The enhanced System Controller Unit's
(eSCU's) card-level provisioning table.
adTAeSCUCardProvEntry entry .1.3.6.1.4.1.664.2.241.2.1.1
An entry in the enhanced System Controller
Unit's (eSCU's) card-level provisioning table.
Indexes
ADTRAN-GENSLOT-MIBadGenSlotInfoIndex
Column Syntax OID
adTAeSCUDefaultRouteInterface deprecated
Default Route Interface to be used by
the Controller.
Enumerationr/w
Enumerated Values:
1ethernet
2in-band
 .1.3.6.1.4.1.664.2.241.2.1.1.1
adTAeSCUIpForwarding
Determines wether the eSCU will perform IP forwarding.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.664.2.241.2.1.1.2
adTAeSCURestoreNetProvFromMUX
This setting determines whether or not the eSCU will attempt to
restore its IP network interface settings from the online MUX.
These settings will be restored only if the eSCU has been removed
and another eSCU inserted …
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.664.2.241.2.1.1.3
adTAeSCUDefaultRouteInterfaceEx
Same as adTAeSCUDefaultRouteInterface but added local-PPP(3), osiTunnel(4),
pppDCC0(5), ethernet2(6), and none(999). Default Route Interface to be used by
the Controller.
Enumerationr/w
Enumerated Values:
1ethernet
2in-band
3local-PPP
4osiTunnel
5pppDCC0
6ethernet2
999none
 .1.3.6.1.4.1.664.2.241.2.1.1.4
adTAeSCULogoffCraftDTRLoss
When the Data Terminal Ready(DTR) signal from the connected terminal is lost,
the controller can automatically disable the port connection.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.664.2.241.2.1.1.5
adTAeSCUMinMenuRefresh
The minimum terminal menu refresh rate used to limit the frequency of menu refreshing.
Enumerationr/w
Enumerated Values:
1normal
2seconds1
3seconds5
4seconds15
5seconds60
6never
 .1.3.6.1.4.1.664.2.241.2.1.1.6

adTAeSCUInterfaceStatusTable

table
.1.3.6.1.4.1.664.2.241.4.1 · 1 row entry · 10 columns
Open in standard view 
The controller's interface-level status
table.
adTAeSCUInterfaceStatusEntry entry .1.3.6.1.4.1.664.2.241.4.1.1
An entry in the controller's interface-level
status table.
Indexes
adTAeSCUIfNumber
Column Syntax OID
adTAeSCUIfNumber
Interface Number assigned by the
Controller to it's interfaces. It is used to
index this table. It may or may not be equal
to the corresponding IfIndex.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.2.241.4.1.1.1
adTAeSCUIfIndex
This value is equal to the corresponding
IfIndex for each interface.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.2.241.4.1.1.2
adTAeSCUIfIPAddress
The IP Address assigned to this interface,
if any.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.664.2.241.4.1.1.3
adTAeSCUIfSubnetMask
The Subnet Mask assigned to this interface,
if any.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.664.2.241.4.1.1.4
adTAeSCUIfDefaultGateway
The Default Gateway assigned to this interface,
if any.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.664.2.241.4.1.1.5
adTAeSCUIfSpeed
The Ethernet interface data rate
Enumeration
Enumerated Values:
1auto
2bt-10
3bt-100
 .1.3.6.1.4.1.664.2.241.4.1.1.6
adTAeSCUIfXoverCorrection
The Ethernet interface cable crossover correction
Enumeration
Enumerated Values:
1auto
2straight
3crossover
 .1.3.6.1.4.1.664.2.241.4.1.1.7
adTAeSCUIfLEDmode
The Ethernet interface LED operation, on for link
active only, or blink with link activity
Enumeration
Enumerated Values:
1link
2blinkactivity
 .1.3.6.1.4.1.664.2.241.4.1.1.8
adTAeSCUIfLinkStatus
The Ethernet interface physical layer (PHY) link
status
Enumeration
Enumerated Values:
1down
2up
 .1.3.6.1.4.1.664.2.241.4.1.1.9
adTAeSCUIfLinkRate
The Ethernet interface link rate and duplex mode as
determined by the hardware
Enumeration
Enumerated Values:
1unknown
2half-duplex-10bt
3half-duplex-100bt
4full-duplex-10bt
5full-duplex-100bt
 .1.3.6.1.4.1.664.2.241.4.1.1.10

adTAeSCUSecAccountTable

table
.1.3.6.1.4.1.664.2.241.5.3 · 1 row entry · 16 columns
Open in standard view 
The SCU Security Account table.
adTAeSCUSecAccountEntry entry .1.3.6.1.4.1.664.2.241.5.3.1
An entry in the SCU Security Account table.
Writeable objects cannot be changed while adTAeSCUSecNumAccountLogin is 1 or more.
Indexes
adTAeSCUSecAccountIndex
Column Syntax OID
adTAeSCUSecAccountIndex
Security account user Index.
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.664.2.241.5.3.1.1
adTAeSCUSecAccountUserID
Security account user ID name. If account
name is zero length (empty) then an account
name can be set. Setting a userID name
creates an account with default properties.
Account names cannot be changed. To change
a…
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.664.2.241.5.3.1.2
adTAeSCUSecAccountStatus
Status of the account. AdTAeSCUSecAccountStatus
cannot be changed while number of
adTAeSCUSecNumAccountLogin is one or more.
Enumerationr/w
Enumerated Values:
1createdEnabled
2createdDisabled
3deleted
 .1.3.6.1.4.1.664.2.241.5.3.1.3
adTAeSCUSecNumAccountLogin
Number of current logins using this account.
Logged in status of account.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.2.241.5.3.1.4
adTAeSCUSecAccountAccessRights
Access rights of account.
Enumerationr/w
Enumerated Values:
1readOnlyAccess
2readWriteAccess
3testAccess
4adminAccess
5fronPanelAccess
6techSupportAccess
7configAccess
 .1.3.6.1.4.1.664.2.241.5.3.1.5
adTAESCUSecChangeAccountPassword
Used to change account password. This string must contain the
old password and the new password separated by a \ (backslash) character.
Example: password\newpassword
A password is a 16 character
alphanumeric word. Pa…
OctetStringr/w
Constraints:
range: 0-33
 .1.3.6.1.4.1.664.2.241.5.3.1.7
adTAeSCUSecAccStatusExt
Status of the account. AdTAeSCUSecAccountStatus
cannot be changed while number of
adTAeSCUSecNumAccountLogin is one or more.
Enumerationr/w
Enumerated Values:
1deleted
2enabled
3disabled
4enabledExpired
5disabledExpired
6enabledLocked
7disabledLocked
8enabledExpiredLocked
9disabledExpiredLocked
 .1.3.6.1.4.1.664.2.241.5.3.1.8
adTAeSCUSecAccExpTime
Security account expiration time.
Integer32r/w
Constraints:
range: 20-365
 .1.3.6.1.4.1.664.2.241.5.3.1.9
adTAeSCUSecAccPasswordExpTime
Security account password expiration time.
Integer32r/w
Constraints:
range: 20-365
 .1.3.6.1.4.1.664.2.241.5.3.1.10
adTAeSCUSecAccountAge
Security account age.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.2.241.5.3.1.11
adTAeSCUSecAccPasswordAge
Security account password age.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.2.241.5.3.1.12
adTAeSCUSecResetAccountAge
Reset security account age.
Enumerationr/w
Enumerated Values:
1resetAccountAge
 .1.3.6.1.4.1.664.2.241.5.3.1.13
adTAeSCUSecResetAccPasswordAge
Reset security account password age.
Enumerationr/w
Enumerated Values:
1resetPasswordAge
 .1.3.6.1.4.1.664.2.241.5.3.1.14
adTAeSCUAccExpirationEnabled
Enable or disable single account expiration.
Enumerationr/w
Enumerated Values:
1accountExpirationEnabled
2accountExpirationDisabled
 .1.3.6.1.4.1.664.2.241.5.3.1.15
adTAeSCUAccPasswordAccAgingEnabled
Enable or disable single account password aging.
Enumerationr/w
Enumerated Values:
1passwordAgingEnabled
2passwordAgingDisabled
 .1.3.6.1.4.1.664.2.241.5.3.1.16
adTAeSCUSecForcePasswordReset
Forces user to reset their password upon next login.
Enumerationr/w
Enumerated Values:
1forcedreset
2clearforcedreset
 .1.3.6.1.4.1.664.2.241.5.3.1.17

adTAeSCUSecAccountLoggedInTable

table
.1.3.6.1.4.1.664.2.241.5.4 · 1 row entry · 9 columns
Open in standard view 
The SCU Security Account table.
adTAeSCUSecAccountLoggedInEntry entry .1.3.6.1.4.1.664.2.241.5.4.1
An entry in the SCU Security Account table.
Indexes
adTAeSCUSecAccountloginIndex
Column Syntax OID
adTAeSCUSecAccountloginIndex
Index to indicate the order the user was logged in.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.664.2.241.5.4.1.1
adTAeSCUSecAccountLoginUserIDIndex
Security account user Index.
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.664.2.241.5.4.1.2
adTAeSCUSecAccountLoginUserID
Security account user ID name.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.664.2.241.5.4.1.3
adTAeSCUSecAccountConnectionType
Method of connection to unit.
Enumeration
Enumerated Values:
1craft
2adminPort
3ip
4x25
5rs485
6dcc
7fcd
8invalidConnection
 .1.3.6.1.4.1.664.2.241.5.4.1.4
adTAeSCUSecAccountSessionType
Connection session type.
Enumeration
Enumerated Values:
1menu
2tl1
3fcd
4ftp
5invalidSession
 .1.3.6.1.4.1.664.2.241.5.4.1.5
adTAeSCUSecAccountLoginConnectionSource
Connection source of login. This could be an
IP address or some other type of address
OctetString
Constraints:
range: 0-50
 .1.3.6.1.4.1.664.2.241.5.4.1.6
adTAeSCUSecAccountLoginDateTime
String display of login date and time.
Formant: mm/dd/yyyy and 24 hour time string
in format hh:mm:ss
OctetString
Constraints:
range: 0-25
 .1.3.6.1.4.1.664.2.241.5.4.1.7
adTAeSCUSecAccountConnectionPort
Port on which the indexed user's connection is established.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.2.241.5.4.1.8
adTAeSCUSecAccountDisconnectSession
Disconnect Indexed user's session.
Integer32r/w
Constraints:
range: 1-2
 .1.3.6.1.4.1.664.2.241.5.4.1.9

adTAeScuRADIUSServerTable

table
.1.3.6.1.4.1.664.2.241.5.9.6 · 1 row entry · 10 columns
Open in standard view 
RADIUS authentication settings.
adTAeScuRADIUSServerEntry entry .1.3.6.1.4.1.664.2.241.5.9.6.1
An entry in the RADIUS settings table.
Indexes
adTAeScuRadiusCfgIndex
Column Syntax OID
adTAeScuRadiusCfgIndex
An Index to RADIUS authentication settings
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.2.241.5.9.6.1.1
adTAeScuRadiusServerAddress deprecated
RADIUS Server IP address.
deprecated to support IPv6. Use adTAeScuRadiusServerInetAddress.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.2.241.5.9.6.1.2
adTAeScuRadiusServerPortNumber
RADIUS Server IP port address.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.2.241.5.9.6.1.3
adTAeScuRadiusServerSecret
The key used in encrypting the packets passed between the
RADIUS Server and the client. This key must match the one
configured on the server.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.2.241.5.9.6.1.4
adTAeScuRADIUSServRetries
Number of retries to contact RADIUS Server.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.664.2.241.5.9.6.1.5
adTAeScuRADIUSServContactTimeOut
RADIUS Server responses time out in milliseconds.
Integer32r/w
Constraints:
range: 1000-30000
 .1.3.6.1.4.1.664.2.241.5.9.6.1.6
adTAeScuRadiusServerSequence
RADIUS Server sequence that ranks priority of each server.
[0] if no IP is assigned at given index.
[1-4] for each additional server added in increasing order. The default
sequence will match the index that each server…
Integer32r/w
Constraints:
range: 0-4
 .1.3.6.1.4.1.664.2.241.5.9.6.1.7
adTAeScuRadiusServerName
Name to be assigned to a given RADIUS server for ease of reference.
Can use either the given name assigned or the IP associated with
server to reference it.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.2.241.5.9.6.1.8
adTAeScuRadiusServerAddressType
The type of adTAeScuRadiusServerInetAddress.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.664.2.241.5.9.6.1.9
adTAeScuRadiusServerInetAddress
RADIUS Server IP address.
Backwards compatibility: Setting this address to a IPv4
address will provision old address adTAeScuRadiusServerAddress
with the new address.
Setting this address to an IPV6 will leave the old …
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.2.241.5.9.6.1.10

adTAeTrustedIPClientTable

table
.1.3.6.1.4.1.664.2.241.5.13.6 · 1 row entry · 4 columns
Open in standard view 
Trusted IP Client Table.
adTAeTrustedIPClientEntry entry .1.3.6.1.4.1.664.2.241.5.13.6.1
An entry in theTrusted IP Client table.
Indexes
adTAeTrustedIPAddress adTAeTrustedIPNetworkBits
Column Syntax OID
adTAeTrustedClientStatus
An Index to adTAeTrustedIPClientTable.
Enumerationr/w
Enumerated Values:
1active
2createTrustedClient
3deleteTrustedClient
 .1.3.6.1.4.1.664.2.241.5.13.6.1.1
adTAeTrustedIPAddress
An IPv4 address that is allowed access to the controller.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.664.2.241.5.13.6.1.2
adTAeTrustedIPNetworkBits
This number is used to generate a netmask. Each connection
IP address is masked and compeared to a adTAeTrustedIPAddress
masked generated by adTAeTrustedIPNetworkBits to see if the
connection request is a Trusted IP Ad…
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.664.2.241.5.13.6.1.3
adTAeTrustedClientResource
Indicate what type of access a trusted client has.
Enumerationr/w
Enumerated Values:
1allPorts
2snmpPorts
3menuPorts
4tL1Ports
5snmpMenuPorts
6snmpTL1Ports
7menuTL1Ports
 .1.3.6.1.4.1.664.2.241.5.13.6.1.4

adTAeTrustedInetClientTable

table
.1.3.6.1.4.1.664.2.241.5.13.8 · 1 row entry · 5 columns
Open in standard view 
IPv4 and IPv6 Trusted IP Client Table.
adTAeTrustedInetClientEntry entry .1.3.6.1.4.1.664.2.241.5.13.8.1
An entry in the IPv4 and IPv6 Trusted IP Client Table.
Indexes
adTAeTrustedInetAddressType adTAeTrustedInetNetworkBits adTAeTrustedInetAddress
Column Syntax OID
adTAeTrustedInetClientStatus
The status of the IPv4 and IPv6 address in the Trusted IP Client Table.
Enumerationr/w
Enumerated Values:
1active
2createTrustedClient
3deleteTrustedClient
 .1.3.6.1.4.1.664.2.241.5.13.8.1.1
adTAeTrustedInetAddressType
The type of adTAeTrustedInetAddress.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.664.2.241.5.13.8.1.2
adTAeTrustedInetNetworkBits
This number is used to generate a netmask. Each connection
IP address is masked and compared to a adTAeTrustedInetAddress
masked generated by adTAeTrustedInetNetworkBits to see if the
connection request is a Trusted IP…
Integer32
Constraints:
range: 1-128
 .1.3.6.1.4.1.664.2.241.5.13.8.1.3
adTAeTrustedInetAddress
An IPv4 or IPv6 address that is allowed access to the controller.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.2.241.5.13.8.1.4
adTAeTrustedInetClientResource
Indicate what type of access a trusted client has in the
IPv4 and IPv6 Trusted IP Client Table..
Enumerationr/w
Enumerated Values:
1allPorts
2snmpPorts
3tL1Ports
4snmpTL1Ports
 .1.3.6.1.4.1.664.2.241.5.13.8.1.5

adTAeScuSavedAdvisoryTable

table
.1.3.6.1.4.1.664.2.241.5.20.6 · 1 row entry · 2 columns
Open in standard view 
Non-Volatile Saved Advisory Warning.
adTAeScuSavedAdvisoryEntry entry .1.3.6.1.4.1.664.2.241.5.20.6.1
An entry in the adTAeScuSavedAdvisoryTable.
Indexes
adTAeScuAdvisoryLineIndex
Column Syntax OID
adTAeScuAdvisoryLineIndex
An Index to Advisory Warning line.
Integer32
Constraints:
range: 1-20
 .1.3.6.1.4.1.664.2.241.5.20.6.1.1
adTAeScuSavedAdvisoryWarning
Advisory Warning line.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.2.241.5.20.6.1.2

adTAeScuEditedAdvisoryTable

table
.1.3.6.1.4.1.664.2.241.5.20.15 · 1 row entry · 1 columns
Open in standard view 
Volatile Edited Advisory Warning.
adTAeScuEditedAdvisoryEntry entry .1.3.6.1.4.1.664.2.241.5.20.15.1
A Volatile Edited Advisory Warning line.
Indexes
adTAeScuAdvisoryLineIndex
Column Syntax OID
adTAeScuEditedAdvisoryWarning
Volatile Ram Edited Advisory Warning line.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.2.241.5.20.15.1.2

adTAeSCUSecLoginStatTable

table
.1.3.6.1.4.1.664.2.241.5.25 · 1 row entry · 8 columns
Open in standard view 
The SCU Security Account table.
adTAeSCUSecLoginStatEntry entry .1.3.6.1.4.1.664.2.241.5.25.1
An entry in the SCU Security Login Statistics table.
Indexes
adTAeSCUSecAccountIndex
Column Syntax OID
adTAeSCUSecLoginStatUserID
Security account user ID name.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.664.2.241.5.25.1.3
adTAeSCUSecNumberOfLogins
The total number of logins recorded.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.2.241.5.25.1.5
adTAeSCUSecTotalNumLoginFailures
The total number of login failures recorded for the account.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.2.241.5.25.1.7
adTAeSCUSecNumFailuresSinceLastLogin
The total number of login failures since the last login of this account.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.2.241.5.25.1.9
adTAeSCUSecLastLoginDateTime
String display of login date and time.
Formant: mm/dd/yyyy and 24 hour time string
in format hh:mm
OctetString
Constraints:
range: 0-25
 .1.3.6.1.4.1.664.2.241.5.25.1.13
adTAeSCUSecLastConnectionType
The connection type of the login.
Enumeration
Enumerated Values:
1craftConnection
2adminConnection
3ntwkmgmtConnection
4ipConnection
5x25Connection
6rS485Connection
7dccConnection
8fCDConnection
9snmpConnection
10unknown1
11unknown2
12unknown3
 .1.3.6.1.4.1.664.2.241.5.25.1.14
adTAeSCUSecLastSessionType
The Session Type of the login.
Enumeration
Enumerated Values:
1menuSessionType
2tL1SessionType
3fcdSessionType
4ftpSessionType
5fsSessionType
6webSessionType
7cliSessionType
8unknown1
9unknown2
10unknown3
 .1.3.6.1.4.1.664.2.241.5.25.1.15
adTAeSCUSecLastIPAddress
The the IPAddress of the login.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.664.2.241.5.25.1.16

adTAeScuTACACSPlusServerTable

table
.1.3.6.1.4.1.664.2.241.5.30.6 · 1 row entry · 9 columns
Open in standard view 
TACACS Plus authentication settings.
adTAeScuTACACSPlusServerEntry entry .1.3.6.1.4.1.664.2.241.5.30.6.1
An entry in the TACACS Plus settings table.
Indexes
adTAeScuTACACSPlusCfgIndex
Column Syntax OID
adTAeScuTACACSPlusCfgIndex
An Index to TACACS Plus authentication settings
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.2.241.5.30.6.1.1
adTAeScuTACACSPlusServerAddress deprecated
TACACS Plus Server IP address.
deprecated to support IPv6. Use adTAeScuTACACSPlusServerInetAddress.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.2.241.5.30.6.1.2
adTAeScuTACACSPlusServerName
TACACS Plus Server Name.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.2.241.5.30.6.1.3
adTAeScuTACACSPlusServerSecret
The key used in encrypting the packets passed between the
TACACS Plus Server and the client. This key must match the one
configured on the server.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.2.241.5.30.6.1.4
adTAeScuTACACSPlusServerSequence
TACACS Plus Server sequence.
Integer32r/w
Constraints:
range: 0-4
 .1.3.6.1.4.1.664.2.241.5.30.6.1.5
adTAeScuTACACSPlusServContactTimeOut
TACACS Plus Server responses time out in milliseconds.
Integer32r/w
Constraints:
range: 1000-30000
 .1.3.6.1.4.1.664.2.241.5.30.6.1.6
adTAeScuTACACSPlusServerPort
TACACS Plus Server port number.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.664.2.241.5.30.6.1.8
adTAeScuTACACSPlusServerAddressType
The type of adTAeScuTACACSPlusServerInetAddress.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.664.2.241.5.30.6.1.9
adTAeScuTACACSPlusServerInetAddress
TACACS Plus Server IP address (InetAddress).
Backwards compatibility: Setting this address to a IPv4
address will provision old address adTAeScuTACACSPlusServerAddress
with the new address.
Setting this address to an I…
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.2.241.5.30.6.1.10

ipDNSLookupIpTable

table
.1.3.6.1.4.1.664.2.241.7.5 · 1 row entry · 3 columns
Open in standard view 
The DNS primary and Secondary IP server..
          
Set primary DNS server index 1
Set secondary DNS server index 2
ipDNSLookupIpTableEntry entry .1.3.6.1.4.1.664.2.241.7.5.1
Each entry contains one IP address to `physical' address
equivalence.
Indexes
ipDNSLookupIpIndex
Column Syntax OID
ipDNSLookupIpIndex
The index value that uniquely identifies the primary or secondary
DNS server IP Address.
Index 1 for Primary DNS server address.
Index 2 for Secondary DNS server address.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.2.241.7.5.1.1
ipDNSLookupIpInetAddressType
The type of ipDNSLookupIpNetAddress.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.664.2.241.7.5.1.2
ipDNSLookupIpInetAddress
The IP Address corresponding to the DNS server.
Index 1 for Primary DNS server address.
Index 2 for Secondary DNS server address.
Backwards compatibility: Setting this address to a IPv4
address will provision old prima…
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.2.241.7.5.1.3

adTAeSCUSCAOperationStatusTable

table
.1.3.6.1.4.1.664.2.241.9.10.10 · 1 row entry · 1 columns
Open in standard view 
Operation status for each slot table.
adTAeSCUSCAOperationStatusEntry entry .1.3.6.1.4.1.664.2.241.9.10.10.1
Operation status for each slot table.
Indexes
ADTRAN-GENSLOT-MIBadGenSlotInfoIndex
Column Syntax OID
adTAeScuSCAOperationStatus
SCA system status: This read-only string will return
a formatted string indicating the progress or status
of the current or most recent SCA operation.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.664.2.241.9.10.10.1.1

adTAeSCUSystemLogTable

table
.1.3.6.1.4.1.664.2.241.14.15 · 1 row entry · 2 columns
Open in standard view 
The SCU System Log table.
adTAeSCUSystemLogEntry entry .1.3.6.1.4.1.664.2.241.14.15.1
An entry in the SCU System Log table.
Readonly object.
Indexes
adTAeSCUSystemLogIndex
Column Syntax OID
adTAeSCUSystemLogIndex
An not-accessible index value. The contoller will not respond to this OID.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.2.241.14.15.1.1
adTAeSCUSystemLogDescription
An string description of a system log entry.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.2.241.14.15.1.5

adTAeScuTL1ActivityLogTable

table
.1.3.6.1.4.1.664.2.241.15.6 · 1 row entry · 2 columns
Open in standard view 
The System TL1 Log table.
adTAeScuTL1ActivityLogEntry entry .1.3.6.1.4.1.664.2.241.15.6.1
An entry in the System TL1 Log table.
Readonly object.
Indexes
adTAeSCUTL1LogIndex
Column Syntax OID
adTAeSCUTL1LogIndex
An Index value to the TL1 Log..
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.2.241.15.6.1.1
adTAeScuTL1ActivityLogDescription
An string description of a system Tl1 log entry.
This string contains the TL1 command and response.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.2.241.15.6.1.2